Estim Dual Channel Videos

[ElectroToto]

Hello,

I also prefer stereo/dual channel with my DIY stereo base estim generator.
I really prefer the real dual channel, not the triphase, IMHO.

For sure the video

ESTIM-Michaela Isizzu
ESTIM with Guerlain
ESTIM-Kasey Chase

are really references,

I would also suggest some of the PEP series ( see Video index for link); even if tag as triphase, some a really stereo 2 channels

PEP (Porn and Estim Program) 1-6
PEP (Porn and Estim Program) 7-9
PEP (Porn and Estim Program) 10

my 2 cents ...

[LondonGent]

I'm curious why so many are saying they prefer dual-channel files. Can anyone explain what they like about them that they don't (usually) get from tri-phase files?

I might try putting together a few experiments to see if it's possible to get the best of both worlds...

[edger477]

I'm curious why so many are saying they prefer dual-channel files. Can anyone explain what they like about them that they don't (usually) get from tri-phase files?

I might try putting together a few experiments to see if it's possible to get the best of both worlds...

For me main reason was to connect more electrodes, but I get even better experience by using 2 stim boxes for same triphase signal and 2 sets of 3 electrodes (each for one triphase) :)

[LondonGent]

I'm curious why so many are saying they prefer dual-channel files. Can anyone explain what they like about them that they don't (usually) get from tri-phase files?

I might try putting together a few experiments to see if it's possible to get the best of both worlds...

For me main reason was to connect more electrodes, but I get even better experience by using 2 stim boxes for same triphase signal and 2 sets of 3 electrodes (each for one triphase) :)

How is that any different from connecting 2 electrodes to each output on a single box? (i.e. 2 electrodes to L+, 2 electrodes to common, 2 electrodes to R-)

And where are you putting them all? I'm not sure I can think of 6 different places to put electrodes on my body!

[edger477]

How is that any different from connecting 2 electrodes to each output on a single box? (i.e. 2 electrodes to L+, 2 electrodes to common, 2 electrodes to R-)

And where are you putting them all? I'm not sure I can think of 6 different places to put electrodes on my body!

Because they are fully isolated from each other, and each channel separate volume control, it is significantly different than just duplicating electrodes on same terminal - even if signal is same, 2 electrodes on one side and 2 on other, current might only flow between 2 that are closest/largest. With another fully isolated pair you can ensure that it will also receive sensation.

see this for more details viewtopic.php?p=323754#p323754

[doremi]

Because they are fully isolated from each other, and each channel separate volume control

Wow! This is becoming so hi-tech! I don't know the feeling, but I understand the concept. Hats off to you guys!

[LondonGent]

Because they are fully isolated from each other, and each channel separate volume control, it is significantly different than just duplicating electrodes on same terminal - even if signal is same, 2 electrodes on one side and 2 on other, current might only flow between 2 that are closest/largest. With another fully isolated pair you can ensure that it will also receive sensation.

see this for more details viewtopic.php?p=323754#p323754

That makes sense! Thanks for the info

[BoundSquirrel]

How is that any different from connecting 2 electrodes to each output on a single box? (i.e. 2 electrodes to L+, 2 electrodes to common, 2 electrodes to R-)

And where are you putting them all? I'm not sure I can think of 6 different places to put electrodes on my body!

Because they are fully isolated from each other, and each channel separate volume control, it is significantly different than just duplicating electrodes on same terminal - even if signal is same, 2 electrodes on one side and 2 on other, current might only flow between 2 that are closest/largest. With another fully isolated pair you can ensure that it will also receive sensation.

see this for more details viewtopic.php?p=323754#p323754

I'm building a second DIY box as soon as the actual box comes (have all the components) to try this out. I tried with my DIY and 2B and it was pretty incredible.

Maybe I'll try THREE boxes, each dual channel. Twelve-electrode madness!

[edger477]

I'm building a second DIY box as soon as the actual box comes (have all the components) to try this out. I tried with my DIY and 2B and it was pretty incredible.

Maybe I'll try THREE boxes, each dual channel. Twelve-electrode madness!

I have 2 boxes and 2B but I like the session to last some time... If I used all of them I am afraid it would not be worth the effort of setting that up.

[Kelvinator]

First off, thanks to all who responded with suggestions for dual channel stimming videos and webteases. I've tried a few videos, Michaela Isuzzi, a couple of the X vs Y ones, and webteases, Bondage, Journeys, Chat Room, and they really focus the signal in my anal area and cock, whereas with triphase, it's more focused on my perineum, balls, and cock. As an aside, the Moaner is a sweet electrode both in dual channel mode and when used in triphase, perhaps because the tip is closer to the prostate.

I'm curious why so many are saying they prefer dual-channel files. Can anyone explain what they like about them that they don't (usually) get from tri-phase files?

I might try putting together a few experiments to see if it's possible to get the best of both worlds...

In my case, with dual channels, I enjoy the intense and directed signals to my anal area. I get off on having my cock and balls stiimmed on one channel, while my ass is stimmed on the other. I also enjoy the variety of switching between triphase and dual channel.

I've downloaded the estim files that seniorgif uploaded to mega and am looking forward to giving them a whirl.

I'm also going to try LondonGent's conversion steps in Audacity and will test the results. Should be interesting.

[Kelvinator]

Success !! I followed LondonGent's step by step instructions on this thread on how to convert a triphase file to a dual channel estim channel. I used Flying Cactus Heavenly 3 video and the accompanying estim file produced by LondonGent. I had to play around a bit with Audacity to get used to the selection and amplify tools, as well as the other ones LondonGent referenced. I decided to use the Amplify tool (default settings) to reduce the resulting mixed signals to within audio limits. I gave the new dual channel file a test run today and the results were quite delightful . AMPS
A: DIY MidiStim
M: Heavenly 3 (Flying Cactus video, LondonGent estim track converted from triphase to dual channel)
P: Moaner Bipolar, Conductive loops Head and Balls.
S: A/Left - Bipolar Butt electrode, B/R - Head & Balls.
Thanks, LondonGent for posting these very stimulating instructions.

[LondonGent]

For those that are interested, I made a dual channel estim track for Cock Hero Akimbo: viewtopic.php?p=331677#p331677

Please let me know your thoughts - I don't have as much experience with dual channel rather than triphase.

[puste]

LondonGent this was awasome. I love the new dual channel estim track for Cock Hero Akimbo.
The only that I miss was the freestyle estim. It felt to long breaks without the freestyle.
And I have also made another long run from some part of this stolen from you sorry.

This is a 2 hour estim file that I have try out and it gave me the longest orgasms without ejaculating.
After about 1 hour and 20 minutes in I have an orgasms that run allmost ½ hour. Or that was what it felt.

https://liteshare.co/files/HPCUVKD

You can use it on any favorite Video but it has to be at least 2 hour long.
I have use this one Melt [Supermassive 2021] that is over 3 hour long.

. AMPS
A: DIY MidiStim
P: Mystim Twisting Tom Silicone / Moaner Bipolar, Conductive loops Head and Balls.
S: A/Left - Bipolar Butt electrode, B/R - Head & Balls.
Thanks, LondonGent for posting these very stimulating instructions.
But I have to set the levels a little bit lower for the strokes B/R.

[senorgif2]

I'm curious why so many are saying they prefer dual-channel files. Can anyone explain what they like about them that they don't (usually) get from tri-phase files?

I might try putting together a few experiments to see if it's possible to get the best of both worlds...

I have done this before: 3 trodes on the cock and balls which uses triphase using one box. Then a bipolar anal toy using DC converted from the triphase file using a second box. you can swap around the channels on the DC box so the anal is either on time with the triphase or is inverted to it. The results are quite extraordinary. The downside is that you need two boxes and a lot of wires and trodes.

[senorgif2]

Wow, thanks! I didn't know anyone was still using these. Compared to the masterpieces put out by DPL, Puste, and Londongent, I feel like mine are total amateur hour. Please do post your modified files-I'd love to check them out!

I meant to respond to this a long time ago, but I think your files are some of the best, don't be so modest. I'd love to know how you make them. Ive also come 180 about my amped files for the most part: the original version is better, except for some sections where you have the edging signal. My amped version sort of blew out the normal sections too much and it as less fidelity than it should compared the original.