FB: The Estim Tower

[Fun2Stim]

I keep thinking to come up with a way for my sterestim or the computer to do a volume ramp and start out real nice and low. I just don't know how.

Someone modded a version that includes a volume ramp - not sure where it is posted but I'm sure if you search the forum you can find it.

Thanks. That sounds awesome.

[Gurgl]

Well, since this is my favourite tease I keep running it, and I keep finding some fine tuning. Sometimes I almost annoy myself for noticing these insignificant things, but I do, and I correct them in my local file, and I report them here to help others and be included in any possible new version. It's the circle of life I guess!

Bugs (kind of):

• After being quizzed and failed, I was sent down one floor, and there it was... Quiz Time! Would be nice if it was not possible to end up with two quiz directly sequential to each other.

• Picture "elle-(17).jpg" is repeated, and "elle-(18)" is not used.

• The text "Can you focus on my boobs while feeling these intensive shocks?" with picture "x66-(8).jpg", followed by "Can you still get some pleasure out of looking at them?" with picture "x66-(9).jpg". Problem is the last picture do no longer show her breasts, it show her from behind, thus do not match the text. I just changed it to repeat the x66-(8).jpg picture, not the best solution, but better...

Spelling mistakes (kind of):
On floor 9 one comment was "Let's make the second to last floor as hard as possible!". Shouldn't floor 9 be counted as the last floor (thus change the text to "Let's make the last floor as hard as possible!")?

At <Page id="pain74p7"> (texts are repeated here, first time used they are correct/in sync with pictures and should not be changed):
My boobs... Change to My eyes...
My pussy... Change to My arms...
My ass... Change to My boobs...
Oh, you are also looking at my feet? Change to Oh, you are also looking at my pussy?

Is:
i will keep playing this one for a while too... or you want to skip ahead?
Should be (capital I)
I will keep playing this one for a while too... or you want to skip ahead?

Is:
Do you Like this beauty too...
Should be:
Do you like this beauty too...

Is:
I love them too!
Should be (because it refers to her hair, earlier sentences in same session is reported in older post):
I love it too!

Is:
do you like my dress
Should be (it's not really a dress)
do you like my outfit

Is:
Enjoy my last pose...you might not get to see me like that again!
Should be:
Enjoy my last pose...you might not get to see me like this again!

Is:
I guess you already noticed that I'm not wearing any pants...
but I don't need pants for what is ahead.
Should be:
I guess you already noticed that I'm not wearing any panties...
but I don't need panties for what is ahead.

Is (text on button):
Cant take it
Should be
Can't take it

Is:
We are quite a bit above ground up here in the 9th floor!
Should be:
We are quite a bit above ground up here on the 9th floor!


Buttons:
And you know I have a personal vendetta with out of place Mercy buttons, so my deletion of those continue. This time I have deleted all buttons which are on pages with these texts (may exist multiple times in the code):

• There's no escape from my milking session...
  There is no way out...
  There is no way out!
  You have to take it all!
  You'll have to endure all of it!

And on the page with text "I hope you can take what's coming, there are no breaks!" I modified the button text to "Last chance!", deleted the button on the following two pages and on the third following page (where I kept the button, thus the button re-appears here) I changed the text "How much longer can you last?" to "Not sure how much longer you can last?".

Now don’t let these comments take focus from your new work! These are just some notes if there would ever be a new version of this tease, but for now, we all count on you focusing your efforts on your brand new masterpiece!

[Gurgl]

There has been some discussions earlier about spikes in the stim files. I sometimes feel them to, but it has been hard to pinpoint where they come from.

But now I started to unravel something! I identified that the file 607a was very prone to produce this phenomenon. And sure enough, listening to this file in a normal audio player I can clearly hear spikes in the sound. I opened the file in a wave editor, and I cant see anything, the waveforms are as smooth as ever. But, switching to Spectrum view and voila, clear strong spikes are shown!

See picture of spectrum view:
https://imgur.com/a/SW2gKEu

Now I have no idea how these spikes have occurred in the file, or what to do about them. But perhaps this is enough for someone with more knowledge to continue with.

[lolol2]

Wow thx for that ongoing amazing support!
Hope it's okay that I'm not going to fix this stuff soon, not sure if I want to touch that old nyx editor anymore...

And you know I have a personal vendetta with out of place Mercy buttons

Haha!
Like all your personal small fixes and ideas! And yes this will help for the future teases, I read all that feedback and try to make things better.
So I try to add to my checklist "no mercy = no buttons"


About that 607a soundfile, you are right... I don't know how these spikes got there... sometimes I just used copy&paste to extend a file when the frequency don't changed... maybe something like that happend.
I don't create my new files like this anymore, so I hope my new files don't have something like that, but I should check them with a spectrum view, thanks!


So thanks for your feedback, always nice to hear that people still play with this.

[Gurgl]

So thanks for your feedback, always nice to hear that people still play with this.

Sure thing, what ever I can do to help your new work! And I will continue to run this tease until the day I die, or the tease kills me, what ever comes first!

[mantrid]

https://imgur.com/a/SW2gKEu

Now I have no idea how these spikes have occurred in the file, or what to do about them. But perhaps this is enough for someone with more knowledge to continue with.

That are phase jumps in the 2nd channel, see near the mouse pointer of the attached image.

If channels are mixed that causes jumps in the mixed signal (3pahse setups). That is depicted by the red curve, which is the sum of the two channels.

[lolol2]

Okay not really sure what I should see there.
Isn't that the triphase effect that feels like the volume is changing?

When I create a file with a constant Hz of 800 in channel 1 for example and a second channel that is changing from 800,1 to 802 over 5min there should be no problem that produce spikes?

Not really deep into that sound stuff, I'm creating the stuff but don't really know how this works in physic.

[mantrid]

Okay not really sure what I should see there.

It's the red curve (back background). You see a sinus signal with a frequency of about 1000Hz where the peak amplitude suddenly increases. The sinus signal is felt as a continuous stimulation (recognition limit is about 50 Hz), but you recognize the sudden increase of the peak amplitude.

Isn't that the triphase effect that feels like the volume is changing?

Yes, this effect is caused by channel mixing.

When I create a file with a constant Hz of 800 in channel 1 for example and a second channel that is changing from 800,1 to 802 over 5min there should be no problem that produce spikes?

If the output signal is described by a(t)*sin(b(t)), this phenomenon (it may be desired or not) occurs if the phase function b(t) is not continuous. Frequency jumps (namely jumps of the derivation b'(t)) would not cause this effect.

If you copy & paste you can avoid this by crossfading the two sources.

[hotiger1]

Hi,

I don`t know what is happening at the moment, but the endless mode crashes nearly every time I am using it. It doesn't matter which browser or computer I use, it just happens everywhere.
There is no more picture, instead a black screen and no more sound.

Can Inyone help please?

BR
hotiger

[aelskling]

Hi,

I don`t know what is happening at the moment, but the endless mode crashes nearly every time I am using it. It doesn't matter which browser or computer I use, it just happens everywhere.
There is no more picture, instead a black screen and no more sound.

Can Inyone help please?

BR
hotiger

Seems to be a general problem. I had it on other teases as well.

[lolol2]

Have not played this tease in a while but I also haven't changed something since... I guess over an year.

The EOS player has some problems with memory leaks etc... maybe the same problem here.
You can try to play it with the old flash player if your browser still works with flash, this should be more stable.

https://milovana.com/webteases/showflash.php?id=37271

[Electro]

I searched this thread and couldn't find the answer and thought I've played this tease enough to have been there already but maybe I'm not doing this right with the configuration.

When I turn on the option for normal girls as pain girls, I don't seem to get them apart from the 2 or 3 that seem to either toss you to a mistress or have some mild pain components, but I found out those are the same ones I get with this option turned off, but I'm not sure what to expect.

[lolol2]

I saw this question before somewhere but forgot to provide an answer.
So yeah maybe the wording and the shown picture is a bit misleading.

When I ask for "Enable pain mistresses as normal girls?" this means that when you enter a floor without enable this feature you will get a "normal" girl by 100%.
If you enable that feature there is a chance by 10-20% that instead of a normal girl you will get a pain mistress from the pool of the standard pain mistress which are used everywhere else too.
This feature doesn't mean that any "normal" girl will give you pain or something.

In the tease this happens when Caprice is saying something like "all girls are busy right now, so I will send you to a pain mistress" after you enter a floor.

Hope this is understandable?

But I have already planned something like that idea of "normal girls as pain mistress" for my new tease.

[Electro]

yes, that makes sense and I do get the "all girls are busy now", which works out well for me to break things up, just like with quiz Sensi. Sometimes I'll get her twice within the same hour during a tease and other times I will play through the whole tease a few times and never see her, so I get excited when she drops in.

But I have already planned something like that idea of "normal girls as pain mistress" for my new tease.

[lolol2]

Yeah the randomness of the flash teases feels sometimes a bit weird!
Sometimes it feels like I always get the same girls... but I checked that multiple times... the code is correct to pick this totally random.

There are mostly 6 girls per floor, so when enable pain mistress and the quiz additional you have a chance of 1 out of 8 to get the quiz or the pain.
So a great chance to see this in a full Tower run once, chance getting higher when Caprice will let you get a second round on a floor etc...