well i got my new chastity belt today as i felt like a change. and the cage i was in wasnt that comfortable and the A ring was of a pslit type which never realy closed properly and led to alot of pinching and some ruising.
the new one has a solid ring which is much harder to get on as its balls through then pull the cock through after and there isnt that much space so is very painfull (what a shame) but one it is through its so much more secure. very little movement
the cage is a better fit as well onto the ring with 3 locking points 2 on the cage and one large pin for the lock which goes through a decent length locking hole. this stops twisting
and hold the whole thing together much mroe firmly
and god is it much mroe comfortable. i cna move around alot better now and not realy worry
its making my chastity go from fun but annoying to fun and frustrating
the differeance comfort makes
-
kneeforu
- Explorer At Heart
- Posts: 663
- Joined: Fri Sep 22, 2006 7:23 pm
- Gender: Male
- Sexual Orientation: Straight
- I am a: Switch
- Location: USA
Re: the differeance comfort makes
What is the new device?
Get to know my mind, and you can have my body!!!!
Re: the differeance comfort makes
it curved birdcage,
Re: the differeance comfort makes
Can you post a link to the product or better still a pic of your cage.
Thanks.
Thanks.
Re: the differeance comfort makes
Wow, nice solid metal cage and a nice pic too.
Thanks for the link and the pic.
The link is incomplete though ... doesn't work.
I think the cage could have been much smaller (lengthwise)
to make your dick more painful and frustrated when aroused.
Thanks for the link and the pic.
The link is incomplete though ... doesn't work.
I think the cage could have been much smaller (lengthwise)
to make your dick more painful and frustrated when aroused.
Re: the differeance comfort makes
well fter a wek of wearing it does have some issues.
the cage is to close to the ring. and the 2spikes which hold i in place also reduce this alot whichlet me wth o of swelling. emdma type swelling which is fluid buildup.
not made any better by the gensing i have been taking which has been adding to this effect.
so its been off and my old belt on whilst i have been modifying it and talking o the nice people atkeptforher.com who confirmed what was happening.
modifications i ain themidst of doing are as follows.
drilled a through hole in the tube which the locking opin goes through. to alow it to be loce further down the pin ceating a larger gap at the base = i hope resulting in less fluid buildup.
emoving the pins whch prevent rotary motion of the cage. with the lock going through both pin AND cage it will not rotate.
this is for comfort so there arnt any spikes poking me
i do need to get a larger lock with longer padlock arms so i can lock it shut now. but thats a rn to BNQ in a bit
as to cage length.
this isnt a made to measure device its off the shelf so its made for lots of people. and i am a grower so when i do get hard its already bad enough,.
its fine thinking pain is good if your not in one but when youa re in one 24/7 it needs to be as comfortabel as humanly possible
also following the piss poor experiances i had with my CB6000 which split and badly injured my cock i am rahter loath to run the same risk again
construction wise you can see its built to a price after a while of looking at it.
its welded where i as an engineer whould have put through holes into the rear ring of the cage which are then welded shut at the rear and on the front edge and ground flat and the fornt end being similar construction not jsut a weld bead joining them.
and the design isnt as good as i initialy thought when i saw it on the website.
and a pic with morning glory so you can realise how nasty it can be.
the cage is to close to the ring. and the 2spikes which hold i in place also reduce this alot whichlet me wth o of swelling. emdma type swelling which is fluid buildup.
not made any better by the gensing i have been taking which has been adding to this effect.
so its been off and my old belt on whilst i have been modifying it and talking o the nice people atkeptforher.com who confirmed what was happening.
modifications i ain themidst of doing are as follows.
drilled a through hole in the tube which the locking opin goes through. to alow it to be loce further down the pin ceating a larger gap at the base = i hope resulting in less fluid buildup.
emoving the pins whch prevent rotary motion of the cage. with the lock going through both pin AND cage it will not rotate.
this is for comfort so there arnt any spikes poking me
i do need to get a larger lock with longer padlock arms so i can lock it shut now. but thats a rn to BNQ in a bit
as to cage length.
this isnt a made to measure device its off the shelf so its made for lots of people. and i am a grower so when i do get hard its already bad enough,.
its fine thinking pain is good if your not in one but when youa re in one 24/7 it needs to be as comfortabel as humanly possible
also following the piss poor experiances i had with my CB6000 which split and badly injured my cock i am rahter loath to run the same risk again
construction wise you can see its built to a price after a while of looking at it.
its welded where i as an engineer whould have put through holes into the rear ring of the cage which are then welded shut at the rear and on the front edge and ground flat and the fornt end being similar construction not jsut a weld bead joining them.
and the design isnt as good as i initialy thought when i saw it on the website.
and a pic with morning glory so you can realise how nasty it can be.