Duct Tape Chastity

[cumhardy]

Something Ive made in these difficult recession times. A chastity cage made entirely from duct tape. It work for very short-term chastity and a bit of fun. Not tried it for more than an hour or so (just to do webteases with) but by all means test its limits.

You will need:

1.JPG (49.38 KiB) Viewed 19542 times

DUCT TAPE (obviously)

2.JPG (52.76 KiB) Viewed 19542 times

Cut a long length of tape. I recommend measuring your flaccid cock and doubling that to get the length of tape needed, but experiment with different measurements.

3.JPG (54.62 KiB) Viewed 19542 times

Fold the tape in half along its length. Stick the sticky side together so you are left with a long ribbon with no sticky material that can make contact with your skin.

(cont...)

[RoniDev]

You could just wear tight jeans and call it "jeans chastity" as long as you dont unzip your pants ;)

[cumhardy]

4.JPG (58.77 KiB) Viewed 19535 times

Make 4 shorter 'ribbons' of folded tape. These will wrap round your dick so measure them out. Make them wider than your flaccid cock but narrower than when you're hard. (you will see what I mean in a bit)
Make 1 of these ribbons a bit longer than the rest, this one will go round your cock and balls.

5.JPG (41.31 KiB) Viewed 19535 times

Fold the long ribbon (the one you made first) in half like so...

6.JPG (48.78 KiB) Viewed 19535 times

Take the ribbon that is going to fit around your cock and balls. Use more duct tape and fix it to one end of the long ribbon so you make a T shape.


(cont...)

[cumhardy]

7.JPG (62.65 KiB) Viewed 19528 times

Tape the remaining ribbons halfway up the length of the long piece like this...
Notice the larger gap between the bottom ribbon and the ones above it.

8.JPG (57.23 KiB) Viewed 19528 times

Flip everything over, with the vertical ribbon still folded in half. Loop the horizontal ribbons over and fix them to the other side like in the picture with more duct tape.
Leave the bottom ribbon undone till the end.
Notice the labels A and B, this is for later.

9.JPG (37.26 KiB) Viewed 19528 times

A detail shot of the end of the device. Notice how the long ribbon folds over and the loops attach to it on the other side. (Ive made the loops big in the pictures so that it is easier to see, but you will need to experiment with fitting it round your own dick).

[cumhardy]

10.JPG (57.33 KiB) Viewed 19524 times

Take a long piece of fresh tape and cut it in half lengthways so you have a long thin piece of tape which still has its sticky-side exposed. You will need at least 2 pieces of tape like this, maybe more.

11.JPG (36.63 KiB) Viewed 19524 times

Heres my stunt-cock cos I didnt want to photo my own. You dont need to make this....

12.JPG (64.01 KiB) Viewed 19524 times

Place the device over your cock...
To 'lock' it, you need to first wrap the parts labelled 'B' around the base of your cock going behind your ball sack too. Make it tight and secure it in place with one of those thin pieces of tape (be careful not to trap any hairs in it!). Then pull the tab labelled 'A' down and use another piece of tape to attach it to the loop you made with 'B'.

[cumhardy]

13.JPG (40.27 KiB) Viewed 19523 times

Now you are locked in!
Try getting hard. If you got the measurements right, you should feel like you are straining against the cage but never getting fully hard.

[RoniDev]

Imo its much better to just wrap the ductape around your cock and balls (so it gets clued on it). Its much tighter that way and dont forget the "fun" when you remove the tape and you werent shaved ;)

[cumhardy]

Ha yeah Ive done that too, thats why I made the 'safer' model

[tdrules]

Now I've seen it all....I'm in awe. A chastity device made out of duct tape.

See that That's a real tear, you make me so proud....btw I work at a hardware store and I thought I've heard and see it all the made things "rigged" with duct tape.

[camipco]

Neat. Thanks for posting.

Back in the day, there was a site called geekporn made by some MIT students. This would have been perfect there.

[les]

Imo its much better to just wrap the ductape around your cock and balls (so it gets clued on it). Its much tighter that way and dont forget the "fun" when you remove the tape and you werent shaved ;)

With eyes watering
I have my legs firmly crossed now.


Les

[green]

Haha =D.. Nice Job cumhardy. A great hooray for cheap chastity =D... hmn

[rbtheservant]

Awesome Cumhardy!!! I am a huge fan of self-made / home-made bondage and fetish items. I have created so many toys and devices I could write a book (and probably should). One of my favorites is the sandwich bag cum catcher that replaces store bought condoms. The cum catcher is not suitable as a birth control device nor do I think it would do a good job protecting one from STDs, but to catch your load and help with clean up or preventing a mess, the cum catcher (hence the name) works great. I wrote the flash tease "Construction Instruction" to show people how to make 'em.

Keep up the good work, man.

[BoredOMK17]

I've made similar models.
I usually use bottle tops and the rolled up plastic body of soda bottles, coupled with lots of duct tape.
I think I've spoken of those prototypes here.

I think it'd be real fun to buy a latex mold making kit and create my own birdlocked.
I've spent DAYS creating home made chastity devices, and none come close to the BL.
I'd love to get my hands on a latex mold making kit.

[cumhardy]

I wrote the flash tease "Construction Instruction" to show people how to make 'em.

Yeah I know that tease, Ive always wanted to make a cum-catcher but I could never find the bag-sealing device mentioned.