We try to keep the advertising to a minimum on Milovana. So if you have a page or product to talk about, please use this forum. Everyone else is welcome to respond with their two cents.
I own 3 chastity cages, all from the CB range (i.e. 2000, 3000 and Curve) and unfortunately I can't wear any of them long term due to the burning feeling the plastic rings cause and how they pull on me bits when I get erect. I've been looking at/for other models/makes and thought I'd also see if any other Milovana members have experienced these same problems with the CB range and whether or not they found a better and more comfortable make.
I'm considering the Houdini here: http://www.bondara.co.uk/bondage-gear/c ... evice.html because it looks like the part where the lock goes acts as a hinge which might take off the tension a bit and not pull on my balls so hard when I do get erect/semi erect (especially at night time) and it also has a rubber bit on the bottom which might be a bit more comfortable then hard plastic.
Any advice would be appreciated as I've spent loads on these things so far
I would love to find one I can wear for longer than a day without having to take it off at night so that I can finally look into handing over the key to someone.
Thanks
Please PM me if you require someone to proofread a tease before you make it live/public. English teases only.
Ive got this one and its good but you have to be careful that as the top is hinged that the top of the tube doesnt pinch the skin between the ring and the balls side end of the tube when the tube gets pushed downwards. Its a good device but doesnt work under trousers too well because of this.
I have a number of CB devices including the CB2000. It helps to take some fine sandpaper (up to 600 grit ) and smooth out the inner side of the rings. You can check your progress by gently running your finger over where you sanded. It takes some time to really get it smooth but that should alleviate most of the cutting and burning feeling. Also you try using some baby oil jell as a lubricant. Good luck. Also I have a couple of mature metals model of trapped ball CD's. I also sand the metal rings to make them as smooth as glass.
