[RELEASE] [ESTIM] Clutch

[phx]

I created restim funscripts for this masterpiece, you can download here: https://mega.nz/folder/JPVVCboa#JEjMGNmciaJt8f_77EpeHg

Nice! Thank you for the kind words and the scripts.

[f12345u]

Finally got a chance to watch this. Review under spoiler.

Spoiler: show

I love the visuals and story telling, though I do think the use of flipping between awakened and drop state was maybe too quick to transition towards the end. I also don't love the finale. I like sounding, have done it myself, however the cbt with the string and visuals associated weren't for me. When it switch to the pegging and there weren't violently purple, constricted balls prominently in the center of the screen, I enjoyed it :)

Everything else about this was stellar. Quality, sound design, visuals!

Estim was great for this! I used Diglets conversion.

[lolol2]

I have created some personal adjustments to the stim file, because I missed even with the spicy file a bit of "power" behind the edge parts. So I created files where the edge parts are ramped with 10% or 20%.

Additional I created two files where also the ending cum part is ramped by 10% or 20% and is extended until the end of the video for maximum "forced orgasm".

Maybe someone has the same taste and wants an even more spicy stim file, here you go.
I personal liked the 20% file... 10% was more for testing.

Spoiler: show

https://mega.nz/folder/BJsUiBRI#mPIgb4fjUDXOgjr170z0-A

[boundupone]

I have created some personal adjustments to the stim file, because I missed even with the spicy file a bit of "power" behind the edge parts. So I created files where the edge parts are ramped with 10% or 20%.

Additional I created two files where also the ending cum part is ramped by 10% or 20% and is extended until the end of the video for maximum "forced orgasm".

Maybe someone has the same taste and wants an even more spicy stim file, here you go.
I personal liked the 20% file... 10% was more for testing.

Spoiler: show

https://mega.nz/folder/BJsUiBRI#mPIgb4fjUDXOgjr170z0-A

Amazing, thank you so much, I think we have very similar tastes, so I cannot wait to try this out

[latexlover6930]

I have created some personal adjustments to the stim file, because I missed even with the spicy file a bit of "power" behind the edge parts. So I created files where the edge parts are ramped with 10% or 20%.

Additional I created two files where also the ending cum part is ramped by 10% or 20% and is extended until the end of the video for maximum "forced orgasm".

Maybe someone has the same taste and wants an even more spicy stim file, here you go.
I personal liked the 20% file... 10% was more for testing.

Spoiler: show

https://mega.nz/folder/BJsUiBRI#mPIgb4fjUDXOgjr170z0-A

Holy ****! This is exactly what it missed for me. I need the spicy edges and finale haha. Thank you so much for this!

[allabouteve]

I created restim funscripts for this masterpiece, you can download here: https://mega.nz/folder/JPVVCboa#JEjMGNmciaJt8f_77EpeHg

Settings:
pulse frequency 0-100 (the default)
pulse width 3-20

I had to take minor creative liberties:
* The original caps at 120hz pulse frequency, but I lowered it to 100hz because that's the programmed limit for the FOC. And everything above 60-80hz feels the same to me anyway.
* The 'pulses between pulses' stuff that adds extra intensity to the R electrode could not be reproduced. I opted to split the tracks, the funscripts contain the 'main' track. There is one additional funscript, Clutch.unconverted.funscript, that contains the intensity of the unconverted stuff. This script is unused.

You probably won't notice anything is missing.

It is possible to mix the main track and the unconverted portion, using some math I still need to invent. But I opted not to do this because I stim with only external electrodes, and the unconverted portion is clearly intended to add extra spice for internal electrodes.

I tested it once, I think I managed to hit every single edge. It's good.

This conversion is great! Thank you for going above and beyond the typical alpha/beta signal.

[LNS]

I have created some personal adjustments to the stim file, because I missed even with the spicy file a bit of "power" behind the edge parts. So I created files where the edge parts are ramped with 10% or 20%.

Additional I created two files where also the ending cum part is ramped by 10% or 20% and is extended until the end of the video for maximum "forced orgasm".

Maybe someone has the same taste and wants an even more spicy stim file, here you go.
I personal liked the 20% file... 10% was more for testing.

Spoiler: show

https://mega.nz/folder/BJsUiBRI#mPIgb4fjUDXOgjr170z0-A

Thanks!!! Appreciate your efforts.

[lolol2]

Since this is still my go to file from time to time... I created an even harder estim file.
The last one already added more sensation, but there was still space to push this more.

I added a v2 version where I extended the edge length (nearly doubled) and added an extra push at the end + drop to zero.
Most of the time the video has not a fixed marker for the ending of the edge phase, so this blends kind of good into the video most of the times. I also added some breaks where it made sense with the video, short breaks works for me very good to make an estim session more interesting.

The file also has an harder overall ramp.
When I calibrate the signal in the beginning to be a strong pleasurable signal... the file reaches at the end exactly the point where its close of getting too much.

Spoiler: show

Clutch-ESTIM-spicy_ramp_20percent_ending_v2.mp3
https://mega.nz/folder/BJsUiBRI#mPIgb4fjUDXOgjr170z0-A

[ridgeracer]

Since this is still my go to file from time to time... I created an even harder estim file.
The last one already added more sensation, but there was still space to push this more.

I added a v2 version where I extended the edge length (nearly doubled) and added an extra push at the end + drop to zero.
Most of the time the video has not a fixed marker for the ending of the edge phase, so this blends kind of good into the video most of the times. I also added some breaks where it made sense with the video, short breaks works for me very good to make an estim session more interesting.

The file also has an harder overall ramp.
When I calibrate the signal in the beginning to be a strong pleasurable signal... the file reaches at the end exactly the point where its close of getting too much.

Spoiler: show

Clutch-ESTIM-spicy_ramp_20percent_ending_v2.mp3
https://mega.nz/folder/BJsUiBRI#mPIgb4fjUDXOgjr170z0-A

Can't wait to give it a go. Your 10 and 20 percent edge increase has been great.
Add a over all ramp up to go with will be perfect. thank you.

[elektrowichser]

Thank you very much for the many new MP3 updates.
I have a question. Last night, I tested the "Spicy Ramp 20 Percent.
" I had three phases A+ on the glans, common on the shaft, and B+ anally.

I got a massively hard penis pretty quickly. But then I came way too early.
Do you have any tips for me on how to make it to the end?
Thanks so much for your tips.

[dymuffshthers]

Both MCB and Clutch funscripts are from a different world.

its like eating chinese food made by the Chinese.
made by the OG himself.

perticularly the alpha and beta on clutch is very complex and is very nicely in sync with e.g. pulse frequency that creates out of this world experiences.

very greatful for your work.

I created restim funscripts for this masterpiece, you can download here: https://mega.nz/folder/JPVVCboa#JEjMGNmciaJt8f_77EpeHg

Settings:
pulse frequency 0-100 (the default)
pulse width 3-20

I had to take minor creative liberties:
* The original caps at 120hz pulse frequency, but I lowered it to 100hz because that's the programmed limit for the FOC. And everything above 60-80hz feels the same to me anyway.
* The 'pulses between pulses' stuff that adds extra intensity to the R electrode could not be reproduced. I opted to split the tracks, the funscripts contain the 'main' track. There is one additional funscript, Clutch.unconverted.funscript, that contains the intensity of the unconverted stuff. This script is unused.

You probably won't notice anything is missing.

It is possible to mix the main track and the unconverted portion, using some math I still need to invent. But I opted not to do this because I stim with only external electrodes, and the unconverted portion is clearly intended to add extra spice for internal electrodes.

I tested it once, I think I managed to hit every single edge. It's good.

[rob1112]

The FOCstim with this is the best estim experience I've ever had.

[edger477]

The FOCstim with this is the best estim experience I've ever had.

Until you try focstim with the erection sensor after you nail the settings for edging alghoritm

[v0ltaire]

Until you try focstim with the erection sensor after you nail the settings for edging alghoritm

The what now?

God dammit, I've only just gotten around to build version 1, I haven't even properly mounted all components in its case yet. This does indeed open awesome new possibilities! Looks like I'll finally have to get into 3D printing. Oh well, it's always nice to have something to look forward to in the long term. Many thanks to all the creators and contributors making stuff like this possible, this community is absolutely awesome!

Anyway, I do concur that the FOC-script takes Clutch up another notch. It's one of the best FOC-scripts I've tried so far. I generally find them to be a bit too harsh though. And by harsh I suppose I really mean "low frequency". I much prefer higher frequencies (set to a lower intensity). Since I haven't had much time to fiddle around with it yet, is there a way to simply adjust restim accordingly? I have to admit I don't fully understand the exact effect that the various settings have yet and which ones actually makes a difference when running funscripts. Surpsrisingly, setting the minimum and maximum frequencies during device selection didn't seem to make a whole lot of difference...?

[edger477]

The what now?

https://github.com/diglet48/toy-designs ... ga%20clamp

It is compatible with foc-v4, we even organized group buys (1 for US and 1 for rest of the world) in Joanne's discord.

And since I like to stim with 2 boxes, I also forked restim and added a "sensor sharing" feature that allows multiple isntances of restim to all share that single sensor connected to one of them: https://github.com/edger477/restim/releases

I like to set up different settings for cock and prostate, i.e. for cock the standard absolute can reduce intensity as you approach the edge, but prostate might have opposite setting, or use the velocity (with long decay), there is so many fun things you can do with them.

is there a way to simply adjust restim accordingly?

You can change Limit Min for "pulse_frequency" axis in settings/Funscript|T-Code, default is 0, I think set it to 10 for test.

If the sensations are harsh, perhaps your electrodes are not optimal.