[RELEASE] [ESTIM] Mistress and the Remote Control Box

[scottay]

I know this one is made for DIY units, but I’m curious if anyone has any advice for getting the most out of a 2B on this one. I only have a 2B that I have barely used since I got it (2 years ago), and I’d love to experiment with that before I spend more money on something I may not end up liking. I have 2 of the rubber loops, 2 anal insertables (a single pole bullet, and a bipole Moaner), and a tri-phase cable.

[phoopha]

I have got today, this is by far and away my favourite Estim video tease. The sensations are absolutely devine and I love the concept of being controlled by a Mistress.

Please, please, please can we have a sequal somewhen!?

[phx]

Please, please, please can we have a sequal somewhen!?

A sequel would be awesome.

It is on track, but I have no idea when I'll be done with the next one. The current status is that I have about 50% of an edit, and I'm in the process of figuring out the latter half. I think I have all the footage I need for the project, but I still have some hours to comb through before all of it has been organized for an edit.

I have some ideas for the estim track, but I have yet to start programming that one. Most of the focus is on the video right now.

[MatzeM]

Please, please, please can we have a sequal somewhen!?

A sequel would be awesome.

It is on track, but I have no idea when I'll be done with the next one. The current status is that I have about 50% of an edit, and I'm in the process of figuring out the latter half. I think I have all the footage I need for the project, but I still have some hours to comb through before all of it has been organized for an edit.

I have some ideas for the estim track, but I have yet to start programming that one. Most of the focus is on the video right now.

Thanks for the Feedback, fantastic news! I enjoy this one a lot and I'm absolutely curious about the next one!

To all creators here at milo: many thanks for all your effort and passion you put into your releases! Absolutely amazing!

BR
M

[boundupone]

Please, please, please can we have a sequal somewhen!?

A sequel would be awesome.

It is on track, but I have no idea when I'll be done with the next one. The current status is that I have about 50% of an edit, and I'm in the process of figuring out the latter half. I think I have all the footage I need for the project, but I still have some hours to comb through before all of it has been organized for an edit.

I have some ideas for the estim track, but I have yet to start programming that one. Most of the focus is on the video right now.

Fantastic news, can't wait to see what you come up with :)

[phx]

Thanks for the Feedback, fantastic news! I enjoy this one a lot and I'm absolutely curious about the next one!

It's not a sequel to this one, but it's in the same vein generally. I think if you liked M&CB, you will like the next one as well.

[edger477]

It's not a sequel to this one, but it's in the same vein generally. I think if you liked M&CB, you will like the next one as well.

I don't really care whether it is a sequel, I look forward to learning what idea you had and what experience you decided to make. The quality of both the editing and story as well as (or especially?) estim of this one makes the wait for next one very promising.

[Dale-Heart]

It's not a sequel to this one, but it's in the same vein generally. I think if you liked M&CB, you will like the next one as well.

What is the url of that next one ?

[phx]

What is the url of that next one ?

It's not done yet, and it's far too early to care about an URL for it.

[Xoxo]

Finally I could test with a proper analog stereo box, incredible experience, thank you!

[Gurgl]

I tested this on my ET-312B, despite it not being optimal for this tease, and it worked well (mode 3). Great tease!

I used the probe setup according to instructions, but I actually could not separate any feeling between A and B channel, all feelings ended up at the common/head, which took the fun out of some scenes. I will try again with my default setup with comon at the base instead.

But as mentioned earlier in this thread, the finale, 5,4,3,2,1 and then - SILENT. At least that's how it felt. It's something special with that last sound file, and for the ET312 it translates into nothing. Such a bummer, when the rest of the video played out fine.

[samsonjude1776]

I tested this on my ET-312B, despite it not being optimal for this tease, and it worked well (mode 3). Great tease!

I used the probe setup according to instructions, but I actually could not separate any feeling between A and B channel, all feelings ended up at the common/head, which took the fun out of some scenes. I will try again with my default setup with comon at the base instead.

But as mentioned earlier in this thread, the finale, 5,4,3,2,1 and then - SILENT. At least that's how it felt. It's something special with that last sound file, and for the ET312 it translates into nothing. Such a bummer, when the rest of the video played out fine.

Have you tried using Restim? It's been a game changer for me using the 312B and running funscrip files for all my favorite estim videos (including this one) The funscript Diglet made is on the previous page. I found the best config is left head, common base and rt under testicle loop.wirh top insulated.

[rob1112]

Just want to add to the love-in here. This is the best estim/video I've ever used. My previous favourite was v91's Sync Hero, but this surpasses it for me - the layered and subtle build of the estim is just superb. I must have done 5 runs on my 312b and it gets better each time.

THANK YOU, really appreciate it. If you had a kofi or patreon I would through a few bucks your way.

[diglet]

I wrote some complicated signal analysis in python to perform the conversion.
...

Wow. Who knew I'd be schooled in DSP-ing in Milovana!
Thanks for sharing this, diglet.

I am a complete noob in all of this - discovered funscripting with Lovense toys only a couple of weeks ago ( viewtopic.php?p=363142#p363142 ) and have "lost myself" in the process (in a good way ). Collecting funscript materials as I go, and wanted to ask you - which of the 5 funscripts you created would be the best one to use with vibrators?

Also: I hacked monsieur_so's Python script to drive my Edge2 and my Gush at the same time, but I'm also thinking that perhaps I can "push the envelope" here and use the data from two (or more? the Edge2 has two motors) of the funscripts at the same time?

The alpha/beta scripts relate to the position of the sensation. If you have multiple motors, you may be able to move sensation between the different motors depending on the alpha/beta position, but that might be pretty hard. For this specific file you can try to increase the speed of the glans motor when alpha is very close to 1, and the prostate motor when beta is very close to 1, and the perineum motor when beta is very close to 0. In this specific file alpha is rarely 0, so you don't have to write special code for that.

The volume axis corresponds closely to the strength of the overall sensation, so definitely use that as a baseline for all motors, make small adjustments depending on the other axis.

If the pulse frequency axis is low you may try to on-off a few times per second. Maybe that won't work at all because the motors have too much inertia to turn on/off quickly. During the good boy sections (where pulse frequency is often low), the sensation is intended to be more intense than usual, so you may have to turn up the motor power during these sections.

[Gamman]

I took another stab at creating funscripts for this video, this time I was more successful.
Get the funscripts here: https://mega.nz/folder/sPlSnIqb#MOazR7rcP_gkC0hOkFyDEQ
These funscripts are direct conversions from the original mp3, no manual edits.

Steps:
Get Restim v1.16 or later: https://github.com/diglet48/restim/releases
In preferences, set "pulse frequency" to 0 ... 200 and "pulse width" to 3..20

In the main screen, set frequency to 800 and rise time to 2. If you want a less aggressive signal, you can set the rise time higher (i.e. 5).

Other settings can be left at defaults.


I tested this funscript about 4 times and I would say it's almost identical to the original. If you liked the original and want to know how these signals are created, you can try viewing them in OpenFunScripter.



This release only works well with 800hz. If you want to use higher/lower frequencies, you need to scale up the pulse width limits (for 1600hz, use 2x the recommended pulse width min and max).

Configuring this is a bit cumbersome. In the future I'll add a way to read the config parameters from file, this way you don't have to change the settings every time you want to try a different release.

Have any more of these multiple script settings been done to other vids?

I’ve got the klink vi 33, CH tranquilizer and Rhythums of Desire and quite frankly they were amazing.
Looking forward to trying this one out