jgrants wrote: Sat May 01, 2021 2:46 pm
First of all thanks for putting it together!
I've tried it with my DIY and found that I've had to crank up the volumen to the max of my amp. For example on the Estim Tower I can only use it half volumen and it will be rather extreme.
Am I the only one? I don't feel "safe" having to do that and made me leave it for now even though the signals felt amazing.
Thanks again!
Huh, that's odd. A lot of the signals are actually from Bryci's Tower and Lolo2's Tower
Was your pc volume set to low perhaps? I know the "torturer in training" has files which are to silent and I'm working on that. The rest of the encounters should be good volume-wise I think.
Today I had time to play and really liked it. I think the signals are really well balanced. Although I have to admit that on a first playthrough I generally like to keep the stim at a lower level, safety first^^.
Only the blonde girl (that wants to make you cum) felt quite a bit more intense but I think this was already addressed.
Thank you very much for this wonderful tease, I will make sure to play it again and try all the different options
lea_calot wrote: Sat May 01, 2021 4:02 pm
Love the concept. Any plans to release the GuideMe version, or open this up for modding in future?
The GuideMe version will definitely be released somewhere in the future. I have to fix some errors and dead ends in the GuideMe before I do that. I am extremely curious to see what mods you guys come up with
jgrants wrote: Sat May 01, 2021 2:46 pm
First of all thanks for putting it together!
I've tried it with my DIY and found that I've had to crank up the volumen to the max of my amp. For example on the Estim Tower I can only use it half volumen and it will be rather extreme.
Am I the only one? I don't feel "safe" having to do that and made me leave it for now even though the signals felt amazing.
Thanks again!
Try voicemeeter bananna from voicemeeter.com yes spelling is correct. anyway this gives you amazing control over volume, fade, and more, should let you preboost the signal, or bypass anything weird being done by your system.
also watch out for volume balancing settings for communications, in the sound control panel, it crops up and changes things without you realizing if it thinks there is a "phone" program running.
kksavas wrote: Sun May 02, 2021 2:45 am
the painfiles are not working everytime for the 2b :/ volume to low :/
but n1 work i like it ;)
It's not a matter of "volume too low", its because the 2B is a digital box and has limits on the types of sounds it can 'interpret'. Specifically, any files that oscilate from 'quiet' to 'loud' with lots of fast pulses will get averaged out to the lower end of the spectrum. A LOT of the files in this tease use that style of wave, which causes the loud buzzing noise you likely noticed from your 2B during operation.
'Shock collar' style pain files which tend to bounce from 0 to high very very quickly often get averaged out to 0, because the 2B is designed to filter out any pulses with a duration of 2 milliseconds or less as a "safety feature" because "they're often painful". Surprise surprise, the pain files are painful.
Unfortunately, a lot of "shock collar style" sound files that work great as pain files through an analogue box, i.e. some of the ones used in this tease, run into this exact problem on the 2B.
I am looking forward to giving this tease another go and try some of the new fixes! Already voted it for TOTM, of course. Thanks once again for putting this one together!
A and B does that translate to left and right, that's alway the question with these Estim teases or is there no specific signal being sent to either side?
Fun observation, no big deal but found it fun that it's mention it's for DIY devices, but the picture at the start is of a 2B, just a fun little thing I noticed :)
kksavas wrote: Sun May 02, 2021 2:45 am
the painfiles are not working everytime for the 2b :/ volume to low :/
but n1 work i like it ;)
I also have a 2B (expensive mistake).
The 2B is NOT suitable for MOST files designed for e-stim no matter how they market the device. The audio processing makes it almost useless for most e-stim content, from what I understand from their forum, this 'feature' is baked into the hardware and no amount of firmware tweaks will ever make the stereo functionality of the 2B even half decent. Also, e-stim systems seem to be very 'proud' of how the 2B handles audio (no idea why, its shit) so never expect it to change.
Yeah some parts have little to nothing on the 2b. Starting to thing I need a different device for these kind of teases but still have 2b for remote control fun. I was thinking with the 2b image at beginning it would work well with the 2b guess not.
I also have the to 2b and found some pain files very low . The pain file with the red head was very strong. I loved it. That was the strongest pain file I have played. Loved the story of the game will play again.
jgrants wrote: Sat May 01, 2021 2:46 pm
First of all thanks for putting it together!
I've tried it with my DIY and found that I've had to crank up the volumen to the max of my amp. For example on the Estim Tower I can only use it half volumen and it will be rather extreme.
Am I the only one? I don't feel "safe" having to do that and made me leave it for now even though the signals felt amazing.
Thanks again!
Huh, that's odd. A lot of the signals are actually from Bryci's Tower and Lolo2's Tower
Was your pc volume set to low perhaps? I know the "torturer in training" has files which are to silent and I'm working on that. The rest of the encounters should be good volume-wise I think.
Thanks, I've tried again with different browsers but can't figure out what's going on. Next time will test on a smartphone (making sure I disable calls )
)