[New Release] The Estim Experiment - EOS Tease

[boundupone]

Yes you need to do this after every change on your volume variable to get an effect.

With the values you have to be careful!
If you want to count in your volume variable from 0% to 100% and using the "normal" number 0 - 100.
You have to divide this with 100 in your volume set command.

Sound.get('estim').setVolume(volume/100)

Then you can normally do things like this to add 10% volume.

volume = volume + 10


But when you are using the range from 0 - 1 in your volume variable, so the numbers EOS wants to have you don't have to devide it with 100.

Sound.get('estim').setVolume(volume)

Then you have to use this to add 10% volume.

volume = volume + 0.1


DON'T MIX BOTH WORLDS!
Or you will get a mess in your script and the volume wouldn't do what you want.

Yikes, I see what you mean, i think i have always used with '/100' though, so should be OK

[lolol2]

Please make sure you don't forget it somewhere.
If you want for example put the volume at 40% and you forget to divide it by 100, EOS will use every number >1 as max volume.
So instead of setting the volume to 40% it will play it with 100%.

Pain tease on accident.

[boundupone]

OK, invites sent to the closed beta, if yours isnt in your inbox now let me know and I will resend

Also set up another thread to discuss beta phase -

viewtopic.php?f=2&t=23066

Thanks all

[thebears73]

OK, invites sent to the closed beta, if yours isnt in your inbox now let me know and I will resend

Also set up another thread to discuss beta phase -

viewtopic.php?f=2&t=23066

Thanks all

Happy to test for you as well, love trying new stuff out.

[boundupone]

OK, invites sent to the closed beta, if yours isnt in your inbox now let me know and I will resend

Also set up another thread to discuss beta phase -

viewtopic.php?f=2&t=23066

Thanks all

Happy to test for you as well, love trying new stuff out.

pm sent

[hawekeye1234]

Excited to see the final result, hoping some stereo stim testers with DIY also mange to get in, curious to see/feel the end result, as the 2B converts the signal as many have talked about before, compared to a StereoStim that plays the files unfiltered.

Which makes the expirience diffrent between these two kind of systems.

[electroking]

OK, invites sent to the closed beta, if yours isnt in your inbox now let me know and I will resend

Also set up another thread to discuss beta phase -

viewtopic.php?f=2&t=23066

Thanks all

I would be happy to test your creation with a 312b also

[boundupone]

OK, invites sent to the closed beta, if yours isnt in your inbox now let me know and I will resend

Also set up another thread to discuss beta phase -

viewtopic.php?f=2&t=23066

Thanks all

I would be happy to test your creation with a 312b also

Thanks for the interest but have closed off the test for now, but the whole thing should be live in a day or two I hope, so stay tuned

[Xyrexus]

This seems quite interesting to me, though I have a 2B, does that work well with this? It's just some of the settings the mistress asks you to do during calibration isn't really a thing. I suppose I should just ignore that and just set it to however much I can take during the calibration loop?

I don't have a tri-phase yet either, but I do have cock loops, and a moaner on the way, so I'll be sure to try this.

I'm curious though, how is the self-bondage portion supposed to work when it's finished? If you're playing the audio from your PC into your estim device, how is the audio to tell alexa to open the lock going to work? Short of having the annoying whine of the e-stim track playing through speakers at the same time.

[Electro]

This seems quite interesting to me, though I have a 2B, does that work well with this? It's just some of the settings the mistress asks you to do during calibration isn't really a thing. I suppose I should just ignore that and just set it to however much I can take during the calibration loop?

I don't have a tri-phase yet either, but I do have cock loops, and a moaner on the way, so I'll be sure to try this.

I'm curious though, how is the self-bondage portion supposed to work when it's finished? If you're playing the audio from your PC into your estim device, how is the audio to tell alexa to open the lock going to work? Short of having the annoying whine of the e-stim track playing through speakers at the same time.

I thought the tease said the Alexa thing wasn't set up, also it wouldn't work because the estim audio wouldn't allow for an output for Alexa to work with Milovana.
This tease was designed for the ET-312B, the files work but have mismatched volume levels with a DIY AudioStim device, the v2 version was supposed to volume match stuff, but it made it worse because the files are mismatched in frequency and waveform and leveling everything at -12db was a failed attempt.

[edger477]

This tease was designed for the ET-312B, the files work but have mismatched volume levels with a DIY AudioStim device, the v2 version was supposed to volume match stuff, but it made it worse because the files are mismatched in frequency and waveform and leveling everything at -12db was a failed attempt.

So then v1 is same tease just with files for 312? What would be better, v1 with 2b or v2 with DIY box?

[boundupone]

Hi, V2 is the correct one to play as v1 was abandoned so v2 has the final adjustments and bug fixes in it, but even then in v2 the levelling of stim files is not great, so make sure you can alter levels as you play.

Still interested to hear what people think of this tease when they play it as I do plan to do future releases in this series, and have a mostly finished estim tease not in this series (just need the time to get it completed). So any feedback on my style of tease is welcome so I can improve future releases.

[edger477]

Ok, I think I already tried V2 with 2B but it did not convert output of some pages... Will try next time when I am on DIY box.
As for any new release in series I will certainly play it, and if you need any help with javascript let me know... I am techie guy who knows technology well but was never creative with art :)

[arig4711]

Hi, V2 is the correct one to play as v1 was abandoned so v2 has the final adjustments and bug fixes in it, but even then in v2 the levelling of stim files is not great, so make sure you can alter levels as you play.

Still interested to hear what people think of this tease when they play it as I do plan to do future releases in this series, and have a mostly finished estim tease not in this series (just need the time to get it completed). So any feedback on my style of tease is welcome so I can improve future releases.

It's one of my favourits, especially because of the pain files, the bdsm-setup and the self bondage option (no necessary dialogs). I use it quite often with my ET-312, but as you said, the stim files aren't balanced (I had a hard self bondage session). I sometimes use the better balanced guide me-version for my stereostim-setup.

[Hopper725]

I’ve loved this tease for a long time but I am having a no audio issue toward the end of the tease where all the pics are presented and then again when it’s offered again at a faster pace. Is there a known issue with the audio files loading for that portion of the tease? When the tease ends with Bianca the audio returns just fine. It only seems to be in the several photo session offerings. And with the milking sequence with the 2 latex domms the audio is almost non existent in the latter portion of that session. DIY box in good working order.

Super excited to see what you do next, love the bondage theme and good taste in content!

Thanks Hop