[Release] Estim Chatroom

[myrid1]

Spoiler: show

I did sneak a look to see what was required, it looks like you need at least 6 friends and a reputation above 50 before you even get the CHANCE of having her show.

That helps a bit, thank you. So I have to at least keep the second condition in mind. But that should not be to hard for me :)
But what I am really wondering is the following:

Spoiler: show

Does she appear when you interact with the chat (Say hello, ask for driver, watch the room) or does she message you herself? Or maybe another way entirely.

Spoiler: show

She comes to you.

[Lamalas]

First of all, amazing tease! This really raises the bar imo!

One small thing I found is that there's no audio during one of Liquidlove's scenario's (the one with the red bathroom tiles)
At least not in the beginning..When she asks me what to do next (and I choose the obvious one) sound starts playing again.

I'll try to do more testing, for example I wonder what happens with the other choice.. but it might be a while before I encounter that scenario again, as she is quite hard to get a hold of..

For context, I'm using the 2B with 2.120b beta firmware, normal stereo (not advanced stereo) and output mapping A.

[submalewillbow123]

For context, I'm using the 2B with 2.120b beta firmware, normal stereo (not advanced stereo) and output mapping A.

Are the pain files all working properly for you? I'm running exactly the same settings and firmware but most of the pain files are being filtered out for me.

[throwawayacct]

Spoiler: show

Lala needs to be turned up, it's far too low a signal compared to the rest of the tease.

I've been doing 2-channel and not triphase, and so far Katy's seems to make the most of this setup. Hers isn't so much fun in triphase.

I got the timed test part of MistressZap twice, and I typed them all flawlessly. Doesn't seem to matter, even if I did the appropriate honorific "Mistress" first, and even if I capitalized every word, only the first, or even matched typing. I'm a really fast typist with high accuracy. Got 5 questions in 2min both times. Is this one of the "impossible to please" kinda things?

Really had trouble getting the cursor or text to appear in the others with her. Is there a lag in the EOS or something that affects this?

Seems like this format would support new chats and room regulars, rotating them out. Is that part of the plan?

[Dust]

I finally got the secret girl. She really is amazing :)

Spoiler: show

Unfortunately she came right after login on, so I feel like I could not really appreciate her...

[thebears73]

For context, I'm using the 2B with 2.120b beta firmware, normal stereo (not advanced stereo) and output mapping A.

Are the pain files all working properly for you? I'm running exactly the same settings and firmware but most of the pain files are being filtered out for me.

Try map c as that is what i used, and high output on device and high selected in the tease settings. What trode placement are you using?

[submalewillbow123]

Try map c as that is what i used, and high output on device and high selected in the tease settings. What trode placement are you using?

Tried map C and it was a lot better but still seems I am not feeling some of the pain files. I see the 'audio input bars' moving on the 2B screen but feel close to nothing. I'm using a loop around cock and balls and another loop around the glans, these are connected to channel B.

[Lamalas]

For context, I'm using the 2B with 2.120b beta firmware, normal stereo (not advanced stereo) and output mapping A.

Are the pain files all working properly for you? I'm running exactly the same settings and firmware but most of the pain files are being filtered out for me.

Yeah, those are working fine for me :)
I do get the impression that the pain files Rillo designed for the 2B, given the 2B's filtering, are more like normal files but louder in volume. So, expect more intense stimulation in a-few-seconds-bursts, but no short spikes, as those would definitely get filtered out.
Another thing to look out for is the output volume of your audio device. Output power can vary greatly between laptops, phones, DAC's, etc. But for what it's worth, on this crappy Toshiba Tecra X40 I have my Windows volume at 78. In the 100% volume calibration, this results in the bars on the 2B being about 2-4 bars below maximum. If the display starts flickering, volume is set too high!

Good luck, have fun!

[Rillo]

For context, I'm using the 2B with 2.120b beta firmware, normal stereo (not advanced stereo) and output mapping A.

This was tested against and designed for the 2B software version 2.106. Based on another comment I would think it is due the the beta software.

[myrid1]

For context, I'm using the 2B with 2.120b beta firmware, normal stereo (not advanced stereo) and output mapping A.

This was tested against and designed for the 2B software version 2.106. Based on another comment I would think it is due the the beta software.

I am using a 2B running 2.105 and it works fine for myself also. The only thing I have to do is on LiquidLove uncommon, I swap the channels since I only use the B channel. Her B channel on tails has almost no signal. Love the randomness of that one.

[tommarr]

Just trying this out at the moment. If I may give some feedback based on my experience with ET312B at least couple of stim signals don't quite match with the calibration signal using my setup. I have only this far met 5 or 6 girls and signals with Lala and HoneyDreams are quite low on B channel (Lala needs more boost than HoneyDreams). Lala needs more power throughout the file but HoneyDreams has a stromher end part when the signal type changes. Can of course be a lot different with some other gear.

I'll keep on testing if I meet some new mistresses. Interesting tease anyway so keep up the good work.

I'm on DIY and noticed something similar with Lala. I'm barely feeling what she does and this cannot be intended. There are really short sharp feeling but that's it. Compared to any other girl I've encountered Lala's files seems to not work at all. Any possibility to check what's going on here?

Other than that this has been great! Still trying to find all girls but CutePink18 has ended my session already two times. Damnn

[otto_dix]

Using the 2B, 2.105 firmware, my first encounter with MistressZap had very low signal strength. Could it be because I had a triphase setup? is it possible for wave patterns to cancel out if you have a common ground?

[submalewillbow123]

I am currently downgrading from 2.120 beta back to 2.106 on my 2B. Once its done I will test the pain files again and see if it makes a difference. Ill update this post with my results.

Update!
After downgrading to 2.106 the pain file issue seems to be resolved. I tested 2 of the pain scenarios and both seem to work fine now, the signals are not being filtered out. Seems like the direction they are going in terms of stereo mode on the 2B seems to be making it worse.

[tr0gd0r]

Really loved this tease! Any plans to add new girls/scenarios, seems like there's a lot you could do with it.

Playing on DIY stereostim, Lala feels a little low to me also, could do with a small boost.

Anyway, congrats on actually shipping something, I've been working on an estim tease for months and I know how much work it is to get it finished.

[Lamalas]

After downgrading to 2.106 the pain file issue seems to be resolved.

That's interesting, that would mean the 2.120b beta firmware also impacts the normal stereo mode. I was not expecting that. The whole reason I wasn't using the advanced stereo mode for this tease is because I highly suspected Rillo designed all audio for version 2.106..

Now that I think about it, I did notice a difference regarding output mapping. In normal stereo, with output mapping C I can generally only get the dials on the 2B up to about 7% (this is identical to my 2.106 experience), whereas with output mapping A i can get it up to 25~30%.
At first I thought this was only a change in output volume, to allow for smaller increments (going from 7 to 8% is a much bigger jump than going from 29 to 30%.. believe me ) but it seems there is more going on here.