New eStim tracks for CockHero videos

[BoundSquirrel]

Update: CH Freedom added to the original post. Here's a link to the post for the video file if you don't already have it.

CH Freedom Main Page

[masperturbator]

Estim was requested for CH DW 404 so I published FLAC exports of the beat tracks for all 5 CH DW videos. I looked at your estim tracks and notice some differences. If frequency matters my files may not work as expected, though they should be safe to try.

Also note that your beat sample is longer than mine. I use the Beatmeter Generator jar to produce beat tracks, and have made a short bass sample for it because when it mixes audio it peaks when the beat sample overlaps.

If you need more, like a Beatmeter Generator export, let me know.

[BoundSquirrel]

Estim was requested for CH DW 404 so I published FLAC exports of the beat tracks for all 5 CH DW videos. I looked at your estim tracks and notice some differences. If frequency matters my files may not work as expected, though they should be safe to try.

Also note that your beat sample is longer than mine. I use the Beatmeter Generator jar to produce beat tracks, and have made a short bass sample for it because when it mixes audio it peaks when the beat sample overlaps.

If you need more, like a Beatmeter Generator export, let me know.

This is great! I think the DW series is a great fit with eStim. I looked at the beat tracks and there are a couple of notes:
- Frequency doesn't matter. I put custom eStim beats for each beat on the track.
- The tracks you sent me seem to only be one side of the DW track; the stereo beats match up.
Do you have the other beat tracks(the ones for the alternate hand)? For eStim, it would be amazing to have one channel for the main hand and the other channel for the alternate hand.
Don't worry about stitching them together into one beat file if you have them separate. I can do that on my end with minimal work. Audacity makes that pretty easy.

[masperturbator]

- The tracks you sent me seem to only be one side of the DW track; the stereo beats match up.

The beat tracks here are the same Beatmeter Generator exports that went into the videos. You're just noticing that there isn't always a beat sound on the beat track. For simultaneous beats only one beat sound is in the audio mix. There are times where the beat track is silent because the beat graphic is accompanying an instrument already playing rhythmically in the song. When the instrument isn't playing a bass note I don't always add one.

In the screenshot you'll see only "Mainhand" and "Offhand" tracks are outputting audio. That's the setting I use to export the beat WAV file. There are multiple rounds of export for the graphical meters, and only one for the audio.

I guess for estim to be proper I'll need to publish the Beatmeter Generator data files. They need a bit of house keeping to make that go smoothly.

[frenchdude]

Update: CH Freedom added to the original post. Here's a link to the post for the video file if you don't already have it.

CH Freedom Main Page

Hello BoundSquirrel,
Yesterday I tried your Freedom stim file... and I just love it
Both beat sections and edging sections are fantastic.
It's never boring, beat sections are varied, and edging sections are subtile and yet terribly effective !
You really did a great job with Digitalparkinglot samples (many thanks to him, I love absolutely everything he does).
So many thanks for this amazing work, I hope you will share new stim files with us in the future


Note : I also think that the DW series would be fantastic with eStim

[thebears73]

Massive variations with the estim tracks for CH Freedom on the 2b, I wouldn't recommend

[ridgeracer]

Worked great with my stereo stim in tri-phase. Great file, I do wish the edge file was a bit louder.
Thanks for this and hope to see more.

[BoundSquirrel]

Added

Softcore Collaboration 2

EmoArt 2

Update on the main page

Enjoy!

[redgreencolor]

Hello BoundSquirrel, thanks for another contribution.
I am very happy that new estima track will appear.
Regarding the track "SoftCore Colab 2 Bsq.mp3" it seems to have an error because it has more than 30 hours of audio, and has a size of more than 900mb.
Thank you

[BoundSquirrel]

Regarding the track "SoftCore Colab 2 Bsq.mp3" it seems to have an error because it has more than 30 hours of audio, and has a size of more than 900mb.

LOL! Yes, definitely an error. Somehow a stray piece of audio got tacked on to the end... WAY at the end.

The link on the main page is being updated now. Thanks for the feedback!

[BoundSquirrel]

Yesterday I tried your Freedom stim file... and I just love it
Both beat sections and edging sections are fantastic.
It's never boring, beat sections are varied, and edging sections are subtile and yet terribly effective !
You really did a great job with Digitalparkinglot samples (many thanks to him, I love absolutely everything he does).
So many thanks for this amazing work, I hope you will share new stim files with us in the future


Note : I also think that the DW series would be fantastic with eStim

Thanks for the feedback. It seems that it works well with a Midistim/Davybox, but maybe not with a 2B like I'd thought. I'm really happy with how the edging turned out on a non-processed device. I agree on the DW. Once I get beat tracks that split right and left, I'll start working on those.

Massive variations with the estim tracks for CH Freedom on the 2b, I wouldn't recommend

I finally had a chance to try this out again. I see what you're saying and I am sorry if you got a little roasted

I like to start out at very low volumes so by the time I got to the edging sections, that's what did the trick. Tonight I tried turning it up just one notch on the 2B and... Ow.

I'll re-do this for a 2B-friendly version when I've got time. Original post updated.

[frenchdude]

FYI I use a ET-312, in Audio 3 mode.
One last thing : I usually make some level adjustments in most stim files I use, with Audacity, because, besides the type of box you use, I think that level perception depends on many other factors, like electrode configuration of course, but also is very personal and subjective.
My adjustments are mainly the amplification / attenuation of sections that I feel not enough / too much (with the amplification effect), and sometimes also the level overall level progression (with the envelope tool).
But, anyway, obtaining good results requires good stim files... and I think that yours are awesome
So, thank you again

Yesterday I tried your Freedom stim file... and I just love it
Both beat sections and edging sections are fantastic.
It's never boring, beat sections are varied, and edging sections are subtile and yet terribly effective !
You really did a great job with Digitalparkinglot samples (many thanks to him, I love absolutely everything he does).
So many thanks for this amazing work, I hope you will share new stim files with us in the future


Note : I also think that the DW series would be fantastic with eStim

Thanks for the feedback. It seems that it works well with a Midistim/Davybox, but maybe not with a 2B like I'd thought. I'm really happy with how the edging turned out on a non-processed device. I agree on the DW. Once I get beat tracks that split right and left, I'll start working on those.

[puste]

I simply do not understand it at all. I have now tried CH Freedom stim file with both ET-312, TAS1 BOX and 2B. But when I get to the edging, I can barely feel any signal at all. And that is even though I am turning up the power level very high. If I have to feel anything about edging at all, it requires me to turn up the volume so loud that everything else becomes totally uncomfortable. As I said, I have tried this on both ET-312 with Audio 2 and Audio 3. And with TAS1 Box and B2 it is even worse. What am I doing wrong. And how did you make it work ?

[qwksilver]

For those that were concerned with running files in sync, try out script player's beta, the newer versions have a estim audio function that syncs a mp3 to a mp4 across two audio devices, so you keep your video/audio on the tv and the estim to a seperate audio out(or bt receiver :>) i have a tutorial in the forum if you need more help doing it.

[puste]

I have done the same with my program for Windows. It also sync mp4 with mp3 estim file.
CHPlayer V2 - 2.0.18. https://github.com/puste1/CHPlayer

But that did not answer my question about haw to use CH Freedom with E-Stim device.
I still not feel anything when comes to edging.....