Home Made Sex Toy Instructions - Nipple Tickler / Stroker

[Sissy Elise]

Hi Everyone,

A few months I had talked about making a home made nipple ticker and a few people were interested in seeing it and how it was made. So I finally got round to making some instructions...

I'm not sure why but home made toys seem a little kinkier ;)

Anyway here is the video of it in action:

(click the pic to watch the video)


Instructions:

You will need:
1) A working old Xmas toy Similar to this one that waves it hands up and down:

1.png (106.3 KiB) Viewed 2944 times

2) Paint rollers or Small Paint/Makeup Brushes.
3) Scissors.
4) Tape.
5) Screwdriver.
6) Pliers.


Step 1:
Remove batteries from the toy and cut its fabric skin off with your scissors to leave you with an inner skeleton something similar to this:

2.png (271.3 KiB) Viewed 2944 times

I accidentally broke the switch on its hands to set it off.
So originally I had to touch the 2 green wires together to turn it on.
(Steps 5-8 solved this problem.)


Step 2:
Getting rid of the annoying sound....
The first way i got rid of the sound was to stick the screwdriver through the holes and destroyed the speaker with the screwdriver:

3.png (226.36 KiB) Viewed 2944 times

Yes this is a bit of a bodge but I was in a rush making it originally. (Follow Steps 5 too 8 to do this a better way.)


Step 3:
Take your pliers and bend the very end of the arms over slightly so that the paint rollers will fit securely:

4.png (241.48 KiB) Viewed 2944 times

Step 4:
Slide the paint rollers on over the arms roughly so that they are your nipples distance apart and bend the arms down so that it will be able to gently stroke your nipples:

5.png (249.74 KiB) Viewed 2944 times

Alternatively you could tape paint/makeup brushes to the arms instead of using paint rollers.
Or maybe you could even add clothes pegs so that it pulls on them instead
(Bending the Arms to get it it in the right place for your nipples can be a little tricky, but keep trying you will get there!)




Step 5: (Optional)
The snowman toy I used was on a timer so when the button was pushed (or in my case wires joined together) it would stop after about 1-2 mins.
I wanted continuous nipple stroking so I wouldn't get distracted.

So I undid the screws to the plastic skeleton and remove the inner's (taking note of how it came apart):

6.png (284.92 KiB) Viewed 2944 times

Step 6: (Optional)
Cut the 2 wires that link the battery to the main circuit board and cut the 2 wires from the motor that goto the circuit board:

7.png (271.22 KiB) Viewed 2944 times

(This step also gets rid of the annoying speaker.)


Step 7: (Optional)
Now Join the Motor wires to the battery wires and tape them up (or use wire connectors) :

8.png (264.33 KiB) Viewed 2944 times

(Mine was red to orange and black to blue..... of course yours may vary)


Step 8: (Optional)
Put the toy back in its case; put the batteries in and switch it on (most toys have an on/off switch near to the battery)

5.png (249.74 KiB) Viewed 2944 times

and hooray no more toy stopping!



Hopefully now you should have a fully functional nipple tickling toy

Please note: Your Annoying Xmas toy could be completely different to the one I used and you could end up finding you destroyed a toy for no reason apart from getting the satisfaction of ripping its head off lol.

Follow these instructions at your own discretion. I will not take responsibility for any damages or losses etc.

[Sissy Elise]

Or maybe you could even add clothes pegs so that it pulls on them instead

pegs mod.png (242.22 KiB) Viewed 2591 times

[Miss Tress]

well , well , well !!! So much pain is possible with the pegs sissy and so much to gain
Looking forward to testing out your wacky contraption sissy on your delicate little nipples . Better make sure we have enough batteries to tease and tease and tease ........
x your non battery operated Miss tress who like to tease , please and surprise you .