Swiss, TeaseAI Personality [Now with downloads]

[opiate]

No problem. I downloaded the fix pack and I will see.

I'm going to be drunk before the end of the night...

The fix to the ends fixed one issue and made another, resulting in a silent error that throws the AI back into limbo
I also just discovered that interrupts don't take chastity into account at all
Which means that every interrupt can potentially throw an index error
I fixed the ends again, I just started adding a 'reset' to each interrupt now
It might be an hour or two before FixPack2 is available.
This also means both version of Swiss are extremely broken until the interrupts can handle chastity

P.S. Don't mind if Swiss starts slurring her speech in the fixpack... ill fixpack that later lol.

[opiate]

Entire AI has been patched for interrupt bugs, I think i got everything that may cause issues.
Re-fixed ends, fixed a loop bug in a start, fixed a bad link in OpiateNPC that was causing the Domme to think you had came, even if you hand't. Fixed bad links in EdgeRoulette, added a layer to protect edge roulette from running while previous flags still exist

I ran about 42 partial test sessions to test as much as possible but I did not wipe any existing flags.
Definitely run a TSReset.

[Drblaze2]

So, i type in TSReset, and it just doesn't register the interrupt?

[opiate]

So, i type in TSReset, and it just doesn't register the interrupt?

No, the first time you run Swiss...
Type Hi Then type TSReset Then when it asks what kind of reset you would like to do.
Type Full ...This will set Tsys up for your first run with Swiss.
If you haven't read the main post, there's a full guide for Setting up Swiss for the first time.

And just so everyone knows, I've ran 3 sessions so far without any crashes or anything weird happening.

[Drblaze2]

I did something stupid, sorry. (For some reason no start was selected upon my install)

[opiate]

I did something stupid, sorry. (For some reason no start was selected upon my install)

Yeah, any fresh AI install will by default have nothing activated it seems

[Lestat]

I'm going to be drunk before the end of the night...

Well, know that you worked so hard I think you deserve to be rewarded by some good fresh beers

Entire AI has been patched for interrupt bugs, I think i got everything that may cause issues.
Re-fixed ends, fixed a loop bug in a start, fixed a bad link in OpiateNPC that was causing the Domme to think you had came, even if you hand't. Fixed bad links in EdgeRoulette, added a layer to protect edge roulette from running while previous flags still exist

I ran about 42 partial test sessions to test as much as possible but I did not wipe any existing flags.
Definitely run a TSReset.

Cool! I downloaded it and I also redownloaded your image folder so I will also try to tag those again and see how it end. I'm going to ru it later.
Thanks



EDIT: For the issue about tagging the images, it looks like sometimes it crashed and sometimes not (i was able to tag 2 folders). So I think it has nothing to do with you or your image folder. Here's the error i get

Spoiler: show

System.Runtime.InteropServices.ExternalException (0x80004005): Une erreur générique s'est produite dans GDI+.
à System.Drawing.Image.SelectActiveFrame(FrameDimension dimension, Int32 frameIndex)
à System.Drawing.ImageAnimator.ImageInfo.UpdateFrame()
à System.Drawing.ImageAnimator.UpdateFrames()
à System.Windows.Forms.ButtonBase.OnPaint(PaintEventArgs pevent)
à System.Windows.Forms.Control.PaintWithErrorHandling(PaintEventArgs e, Int16 layer)
à System.Windows.Forms.Control.WmPaint(Message& m)
à System.Windows.Forms.Control.WndProc(Message& m)
à System.Windows.Forms.ButtonBase.WndProc(Message& m)
à System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
à System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
à System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

If you could take a look and maybe help me when you have time it would be kind (it's in french sorry, but if there's something you don't understand tell me and I will translate it)

Thanks

[opiate]

I'm going to be drunk before the end of the night...

Well, know that you worked so hard I think you deserve to be rewarded by some good fresh beers

Entire AI has been patched for interrupt bugs, I think i got everything that may cause issues.
Re-fixed ends, fixed a loop bug in a start, fixed a bad link in OpiateNPC that was causing the Domme to think you had came, even if you hand't. Fixed bad links in EdgeRoulette, added a layer to protect edge roulette from running while previous flags still exist

I ran about 42 partial test sessions to test as much as possible but I did not wipe any existing flags.
Definitely run a TSReset.

Cool! I downloaded it and I also redownloaded your image folder so I will also try to tag those again and see how it end. I'm going to ru it later.
Thanks



EDIT: For the issue about tagging the images, it looks like sometimes it crashed and sometimes not (i was able to tag 2 folders). So I think it has nothing to do with you or your image folder. Here's the error i get

Spoiler: show

System.Runtime.InteropServices.ExternalException (0x80004005): Une erreur générique s'est produite dans GDI+.
à System.Drawing.Image.SelectActiveFrame(FrameDimension dimension, Int32 frameIndex)
à System.Drawing.ImageAnimator.ImageInfo.UpdateFrame()
à System.Drawing.ImageAnimator.UpdateFrames()
à System.Windows.Forms.ButtonBase.OnPaint(PaintEventArgs pevent)
à System.Windows.Forms.Control.PaintWithErrorHandling(PaintEventArgs e, Int16 layer)
à System.Windows.Forms.Control.WmPaint(Message& m)
à System.Windows.Forms.Control.WndProc(Message& m)
à System.Windows.Forms.ButtonBase.WndProc(Message& m)
à System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
à System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
à System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

If you could take a look and maybe help me when you have time it would be kind (it's in french sorry, but if there's something you don't understand tell me and I will translate it)

Thanks

It sounds like you may have a bad file that TeaseAI cant open
Are you crashing while tagging one of the folders that I've hosted?
Or are you tagging a larger collection?

I haven't had any trouble with the image tagger, and i re-tag my entire install atleast twice a week.
Does it seem to crash in the same folder each time?

If it does seem to crash in the same place, slowly scroll through the pictures as your tagging them and try to remember the picture that you see right before TeaseAI crashes... then go find that picture and delete the one immediately after it (as that should be the picture that's causing the crash)

If none of this seems to fit the bill, you may want to try using a completely clean copy of TeaseAI... either name the folder something different, or if your using Windows 8... if you want I can post a quick walk through on how to get rid of TeaseAI's hidden files.

[matman]

The programs isn't registering TSReset even after I say hi.

[Lestat]

It sounds like you may have a bad file that TeaseAI cant open
Are you crashing while tagging one of the folders that I've hosted?
Or are you tagging a larger collection?

I haven't had any trouble with the image tagger, and i re-tag my entire install atleast twice a week.
Does it seem to crash in the same folder each time?

For Swiss I only used and tagged your folders. And no, it crashes with almost all folders. Even the ones I've been able to tag have crashed before it finally worked...

If it does seem to crash in the same place, slowly scroll through the pictures as your tagging them and try to remember the picture that you see right before TeaseAI crashes... then go find that picture and delete the one immediately after it (as that should be the picture that's causing the crash)

Here's a thing I don't understand... In the settings, in Local Tag, I can't tag picture by picture. Tease AI only allow me to tag folders. And if I try to add the name of the picture after the acces path of the folder, I doesn't work either...

If none of this seems to fit the bill, you may want to try using a completely clean copy of TeaseAI... either name the folder something different, or if your using Windows 8... if you want I can post a quick walk through on how to get rid of TeaseAI's hidden files.

I'll try to reinstall a clean copy of Tease Ai, maybe in a different folder, but I doubt it will work. It seems I have the same issue on other Tease Ai installation with other Domme Personnality too (I have 3, one with Wicked Tease only, one with Wicked and png Wicked Tease and one with Swiss only. Separate folders, separate saves and all.)
If I remember well, I already had troubles tagging with the very first installment of Tease AI, then or I'm unlucky or it may be a Tease AI issue...
What left me interrogative is that with your folders I was able to tag them after deleting all the gifs, but I had the same problem before Swiss with my folders that did not contain gifs... Mystery, mystery!
And no I'm not using W8, I'm still on XP :suicide:

Thank you for your help anyway, it was kind

[opiate]

I'll try to reinstall a clean copy of Tease Ai, maybe in a different folder, but I doubt it will work. It seems I have the same issue on other Tease Ai installation with other Domme Personnality too (I have 3, one with Wicked Tease only, one with Wicked and png Wicked Tease and one with Swiss only. Separate folders, separate saves and all.)
If I remember well, I already had troubles tagging with the very first installment of Tease AI, then or I'm unlucky or it may be a Tease AI issue...
What left me interrogative is that with your folders I was able to tag them after deleting all the gifs, but I had the same problem before Swiss with my folders that did not contain gifs... Mystery, mystery!
And no I'm not using W8, I'm still on XP :suicide:

Thank you for your help anyway, it was kind

Mmm, Windows XP complicates things, I'm not going to be able to be of much assistance there

I'm not sure about Windows XP's UAC, but if your TeaseAI installations are anywhere in your Documents and Settings or Users folders I would reinstall them to the root of your C drive, (or anywhere on a non primary drive) I know in Windows7 and 8 those two folders are hell for applications to operate in.

Also, I don't know how many operating systems qualify for the free Windows 10 upgrade
But you might seriously consider getting away from XP if you can do it for free
Your issues may lay in your OS

[Lestat]

Ok, thanks!

My Tease Ai installation is in
C:\Downloads(which is a folder created by BitComet)\Perso\Tease Ai\Swiss\Tease Ai (this last one contains only Tease AI (Swiss dedicated), Swiss and your pictures)

I'll just try to mess around with everything And stop bothering you with that

Thanks for your advice about XP, I'll take a look about it right now.

[Drblaze2]

The programs isn't registering TSReset even after I say hi.

Same thing happened to me, you have to go into it and select a start, then exit out and restart. (At least that worked for me so, hopefully :D)

[opiate]

The programs isn't registering TSReset even after I say hi.

Same thing happened to me, you have to go into it and select a start, then exit out and restart. (At least that worked for me so, hopefully :D)

Yes, sorry... I didn't think to mention this. You have to enable the start scripts to access Tsys at all

[opiate]

You know, if I had made 49 posts instead of editing the main post 49 times... I might be an explorer at heart by now

Main post updated to simplify current install instructions, and reflect the available version