ching around to drive it in me. I found I can cum from rubbing my prostate by long periods of play and/or thrusting fast. I am looking for new ways to play. I wish I could build a machine so if anyone has any cheap and easy to build plans and want to share, please do. Thanks.Best anal techniques
Best anal techniques
I have been exploring anal play. I was wondering if people could share their best techniques. I have a couple dildos and a butt plug. I have done a number of teases but it is hard to get through some. Either it starts to hurt or I get tired. I have attached my toys to the bed post so I can do it doggie style. I have attached it to a chair so I can ride it. I have layed in bed reaching between my legs and rea ching around to drive it in me. I found I can cum from rubbing my prostate by long periods of play and/or thrusting fast. I am looking for new ways to play. I wish I could build a machine so if anyone has any cheap and easy to build plans and want to share, please do. Thanks.
ching around to drive it in me. I found I can cum from rubbing my prostate by long periods of play and/or thrusting fast. I am looking for new ways to play. I wish I could build a machine so if anyone has any cheap and easy to build plans and want to share, please do. Thanks.-
CheerfullyInsane
- Explorer At Heart
- Posts: 163
- Joined: Mon Mar 16, 2009 6:37 pm
- Gender: Male
- Sexual Orientation: Bisexual/Bi-Curious
- I am a: Switch
- Location: Denmark
Re: Best anal techniques
Well, what works for one doesn't necessarily work for the other guy. Just the way it is.
The vibrations that are a must for most people is a complete turn-off for me.
But with that in mind, here's what works for me:
The main problem is muscle-fatigue. Doing it yourself means you have to do all the work yourself as well.
So I've got suction-cups on every toy I own (excepting plugs for obvious reasons) so I can stick it on whatever surface comes handy.
One great way to prolong the experience is sticking the thing on a wall, and then you can rock back and forth with a minimum of effort. Works great in a corridor of some sort where you can use your arms on the opposite wall for movement.
Secondly, I find the most important thing is the toy itself.
As much as it pains me to say it, size DOES matter.
Just don't go overboard and start out with some of the TSX Toys monsters........
As for the plans for a cheap and easy-to-build machine, I've got that.
Sitting right here next to the Holy Grail, and the body of Jimmy Hoffa.
Seriously though, I've seen a lot of screwy ideas online for converting common house-hold appliances for this purpose. Most are of the Mad Hatter variety, and the few that looks like they may actually be feasible will require a well-stocked tool-shed and a degree in mechanical engineering.
And don't even think about hooking up a power-tool to some sort of ad hoc shaft........
There's always a few nut-cases with technical drawings scrawled on a napkin that insist it's possible, but they never think about gear-reduction nor the torque involved.
If the shaft doesn't shatter, and send slivers of shrapnel into your tender bits, the forces involved would rip whatever orifice being used into several bloody pieces..........Apologies for the somewhat graphic description.
So you're better off sticking to manual labor, or alternatively buy a machine that's been built for the purpose. Yes, they're expensive, but they won't kill you either.
The vibrations that are a must for most people is a complete turn-off for me.
But with that in mind, here's what works for me:
The main problem is muscle-fatigue. Doing it yourself means you have to do all the work yourself as well.
So I've got suction-cups on every toy I own (excepting plugs for obvious reasons) so I can stick it on whatever surface comes handy.
One great way to prolong the experience is sticking the thing on a wall, and then you can rock back and forth with a minimum of effort. Works great in a corridor of some sort where you can use your arms on the opposite wall for movement.
Secondly, I find the most important thing is the toy itself.
As much as it pains me to say it, size DOES matter.
Just don't go overboard and start out with some of the TSX Toys monsters........
As for the plans for a cheap and easy-to-build machine, I've got that.
Sitting right here next to the Holy Grail, and the body of Jimmy Hoffa.
Seriously though, I've seen a lot of screwy ideas online for converting common house-hold appliances for this purpose. Most are of the Mad Hatter variety, and the few that looks like they may actually be feasible will require a well-stocked tool-shed and a degree in mechanical engineering.
And don't even think about hooking up a power-tool to some sort of ad hoc shaft........
There's always a few nut-cases with technical drawings scrawled on a napkin that insist it's possible, but they never think about gear-reduction nor the torque involved.
If the shaft doesn't shatter, and send slivers of shrapnel into your tender bits, the forces involved would rip whatever orifice being used into several bloody pieces..........Apologies for the somewhat graphic description.
So you're better off sticking to manual labor, or alternatively buy a machine that's been built for the purpose. Yes, they're expensive, but they won't kill you either.
By the time you swear your his.
shivering and sighing.
And he vows his passion is,
infinite, undying.
Lady, make a note of this:
One of you is lying.
shivering and sighing.
And he vows his passion is,
infinite, undying.
Lady, make a note of this:
One of you is lying.
-
janmb
- Experimentor
- Posts: 1658
- Joined: Sun Aug 16, 2009 3:25 pm
- Gender: Male
- Sexual Orientation: Straight
- I am a: Submissive
Re: Best anal techniques
You might wanna check out my (and others as well) posts in this thread: http://www.milovana.com/forum/viewtopic ... 72#p119672
Yes, I most certainly CAN do it again!