[Release] CH-Breathe Harder with ESTIM

[digitalparkinglot]

CH-Breathe-estim cover.png (33.42 KiB) Viewed 12366 times

Hello Milovana,

OrgasmPhantasm suggested the brilliant idea of creating an estim track to go along with my 2019 creation CH-Breathe Harder-featuring Anjelica, so that is just what I did. As if brutally challenging breath play with one of the sexiest women on the planet wasn't enough, you can now also plug yourself into your estim device and have unrelentingly waves of electricity surge through your shaft and milk the cum from your cock while you play along. Watching this incredible goddess while holding your breath to the on screen commands and sending electrical pulses through your sensitive bits, all at the same time, may cause head spinning, leg shaking, and spontaneous compulsive eruptions from your cock...YOU HAVE BEEN WARNED!!!

Torrent for the e-stim track:

Breathe Harder-estim.mp3.torrent

(13.42 KiB) Downloaded 1257 times

Torrent for the original video:

CH-Breathe Harder - featuring Anjelica.mp4.torrent

(11.16 KiB) Downloaded 1150 times

MEGA download link (please import into your account first):
https://mega.nz/folder/yZFRwAaI#5M4Dj5zzgXOWzzBeDWVRVA


Please let me know what you think, and as always, enjoy responsibly.

-digitalparkinglot

[OrgasmPhantasm]

Hell yeah! This is a next-level estim experience. Anyone with a box needs to give this one a go! The combo of breath play and estim is really something else. The pacing is also very good. Almost like the video was made for estim from the start.

Good luck making it to the end!

Spoiler: show

I haven't made it past 54 minutes yet.

10/10 - will stim again. Thank you DPL! It's like a late Christmas present!

[digitalparkinglot]

I recommend your favorite triphase configuration. This was tested with L- & R- (common) to the head and L+ to the shaft and R+ under the balls and found to be very good.

-dpl

[Bluemoon]

Amazing.
I came just at the end it was really great

[GH-Hoss]

Another masterpiece from DPL. Your stuff works so well for me... never a disappointment.

My tri-phase setup: L+ to glans ring, R+ to prostate Large Flo, Common split to both CR cock ring (top insulated) and anal ring on Large Flo. Looking forward to trying your recommended config.

[digitalparkinglot]

I'm really surprised how many more times the video has been downloaded.

-dpl

[BoundSquirrel]

I'm really surprised how many more times the video has been downloaded.

-dpl

I can only speak for myself, but nowadays, if a video doesn't have an estim track with it, I'm very likely to skip it. I really miss having the bandwidth to create my own tracks. Fortunately for life but unfortunately for this topic, life really kicked into high gear about a year and a half ago so I don't have time to be creative on this front. So, I'm one of the ones that downloaded this once you put out an estim track for it. I still haven't had time to play it.

Your work is amazing. You could put out an estim track set to a 1987 Honda commercial and I'd probably download it.

[doremi]

Your work is amazing. You could put out an estim track set to a 1987 Honda commercial and I'd probably download it.

How about a 1991 Pepsi commercial instead?

[blondie88]

I recommend your favorite triphase configuration. This was tested with L- & R- (common) to the head and L+ to the shaft and R+ under the balls and found to be very good.

-dpl

What kind of electrodes are you using with this configuration DPL?

Thanks for continually putting out work of the absolute highest quality - I rewatched your Lily Ivy video yesterday - damn that is a piece of work (and so is she)..

[digitalparkinglot]

I recommend your favorite triphase configuration. This was tested with L- & R- (common) to the head and L+ to the shaft and R+ under the balls and found to be very good.

-dpl

What kind of electrodes are you using with this configuration DPL?

Thanks for continually putting out work of the absolute highest quality - I rewatched your Lily Ivy video yesterday - damn that is a piece of work (and so is she)..

I'm using some homemade electrodes made from bent up copper wire

[doremi]

I'm using some homemade electrodes made from bent up copper wire

The ultimate DIY kit.

[throwawayacct]

I recommend your favorite triphase configuration. This was tested with L- & R- (common) to the head and L+ to the shaft and R+ under the balls and found to be very good.

-dpl

What kind of electrodes are you using with this configuration DPL?

Thanks for continually putting out work of the absolute highest quality - I rewatched your Lily Ivy video yesterday - damn that is a piece of work (and so is she)..

I'm using some homemade electrodes made from bent up copper wire

I use a pair of solid 14ga strands, twisted together tightly to give stiffness, inserted into 8mm (4mm id) conductive rubber tubing. I solder 4mm leads to the ends. I have one size for around and under the whole bait n' tackle that hits the perineum, another for around the base of shaft, and the one for my head is a regular loop with a top-loop, I just use the regular strand and some 4mm tubing for over the top, repurposed a pin from an old Mystim Pete to hold it in place, and soldered ends to another 4mm lead. I heat-shrink or vinyl tape around the top sides to mitigate over-stimming the dorsal nerve.

Benefits of the conductivity, improved "softeness" for longer sessions, spreading out the sensation from using a wide CR (which is replaceable), and durable so that they're low-fuss.

DIY electrodes are the way to go, personally, and there are some pretty good designs we've come up with - but then again I've seen some of the horror-shows from less capable builders out there. Know your limits, I guess...

[Dolgian]

@throwawayacct
can you create a post with your DIY walkthrough
I have been using ebay and amazon trodes for 2 years now, maybe its time I try some good shit :)

the best I have found so far are those cloth electrodes, I put them in salted water for a few minutes before a session.
they will last 40-60 minutes no problem.

here are my bad experiences with other trodes:
rubber tubing, it became hot and i got a burn. with those, I have to relube every 15-20min. I also didnt like the very small ones, they stinged alot!
leather cock ring: perfect at the beginning, but soon lost its conductivity, and the current only goes through the metal connector.
cage with mini sound: the feeling was the best, but it broke after a dozen uses.
full cock cage: problem is lube, its a pain to take off during long sessions, also broke.
pads: nice feeling, but need to be perfectly shaved, good as 2nd triphase below balls, stings when not well placed.

happy 2022 everyone!

[throwawayacct]

@throwawayacct
can you create a post with your DIY walkthrough
I have been using ebay and amazon trodes for 2 years now, maybe its time I try some good shit :)

Sorry - they're built and I'm not taking them apart any time soon! When I do go to replace the CR, I'll try and remember to take pics. Copper core with CR is a happy medium for me - the consistency of current stays, the CR doesn't seem to get on-off spots either.

re: drying out and re-lubing, I found that making sure there wasn't a lot of open air exposure helps - wrapping with a towel or my preferred - cling wrap - keeps from needing to re-lube. Shaving helps a ton. For lube, I make homemade K-Lube from powder - I can make it thick consistency and it doesn't dry out as fast as the commercially bought stuff.

[m8]

Am I doing something wrong? The mp3 has metadata for "EDGE of Frustration 2" and doesn't seem to sync with the Breathe Harder video...