[RELEASE] Zer0 Game

[edger477]

FYI: To address this, I've changed the volume pre-set in the Restim preferences. I set my volume range from 0.4 or 0.5 to 1 instead of 0 to 1, and this helps with any funscript volume file that's to low (wihle still providing a break at the appropriate moments).

This is a good way to play "FOC" funscripts since these generally have more ramp/range than stereostim scripts (when I did not make a dedicated stereostim one, which I tend to do less and less because I don't use stereostim anymore and can't test it). But my conversion of FOC->Stereostim leaves 0 at 0, because raising them to 40% ruins the intent of "hands off" sections :D

[puste]

Thank you for this forthr1ght. 0.4 - 1 This realy change the feeling to much higer level.

[boundupone]

Is this in the settings - volume > lower volume during pauses?

I have inactivity threshold 2s
Ramp up time 3s
reduce volume by 50%

Is that the sort of settings you would recommend?

[edger477]

Is this in the settings - volume > lower volume during pauses?

I have inactivity threshold 2s
Ramp up time 3s
reduce volume by 50%

Is that the sort of settings you would recommend?

This will make the signal go down during pauses, but I already make my signal go to practically 0 during no stroke movement. So this turned on or off won't really make much of a difference.

This is not a bug, this is intentional, I have perceived this creation to be all about ruined orgasms and that is why there are so many sections without any signal. You are free to edit the scripts and publish "remix" that is different experience, I think that is great way to get into making estim funscripts because in this case 95% of the stim is already done :D

[boundupone]

Is this in the settings - volume > lower volume during pauses?

I have inactivity threshold 2s
Ramp up time 3s
reduce volume by 50%

Is that the sort of settings you would recommend?

This will make the signal go down during pauses, but I already make my signal go to practically 0 during no stroke movement. So this turned on or off won't really make much of a difference.

This is not a bug, this is intentional, I have perceived this creation to be all about ruined orgasms and that is why there are so many sections without any signal. You are free to edit the scripts and publish "remix" that is different experience, I think that is great way to get into making estim funscripts because in this case 95% of the stim is already done :D

Hey thanks, sometimes zero stim is integral to the story, and the re-sensitizing can really help, although sometimes the ramp up can be challenging as you have regained all your sensation, especially if you like the stim on the stronger side, but for this one i think i would remove those settings to experience the real deal :)

[edger477]

i would remove those settings to experience the real deal :)

You don't need to touch this setting... it takes volume to 0 but it is already 0 in volume funscript. And pauses are not so long to completely resensitize you - longest are 2 min and 1 min 30 sec - and they are part of experience, sometimes with poppers prompts etc., with resumption also taking several seconds, not all of the sudden. And longest period without stim is first 3:30 (calibration is at 4 min).
There are few spikes but if you played Kontrol you are familiar with them :)
Also, don't play foc scripts on stereostim, there is stereostim subfolder, if you play on stereostim copy scripts from there and overwrite these next to the video - it has reduced ramp and spikes intensity.

[edger477]

Note that I have updated the stim scripts for this release.

This was result from feedback here and in Disconnected which helped me discover a bug in my workflow. Also, stereostim volume now is not going all the way to 0 (except all the way on start), so that you don't have to change TCode settings, it should be about half of the dynamic range of foc-stim box, making it a much more tempered experience.

Thank you all for feedback!

[ridgeracer]

Note that I have updated the stim scripts for this release.

This was result from feedback here and in Disconnected which helped me discover a bug in my workflow. Also, stereostim volume now is not going all the way to 0 (except all the way on start), so that you don't have to change TCode settings, it should be about half of the dynamic range of foc-stim box, making it a much more tempered experience.

Thank you all for feedback!

Any chance you can update the mp3 stereo file.
I can't begin to tell you how good your mp3 conversions are. All of them work so well, new go too's. please don't stop converting your FOC over to Mp3's.
Thanks for all the good times!

[edger477]

Spoiler for offtopic

Spoiler: show

I can't begin to tell you how good your mp3 conversions are

Then you should try calibrating restim for your own electrodes and then play the files directly, it will be even better, you can turn volume more up because you can reduce it on exact electrode that begins to be too much.

I have actually updated estim scripts for more than 20 different creations today, some were not even published in the folder until today (mainly some PMVs and videos that are not on Milovana). All are for FOC-stim, but all also have .volume-stereostim.funscript that is created using new tool I made for this, to scale volume so that it feels good on stereostim. You can recognize all updated scripts by this .volume-stereostim.funscript, and when taking the funscripts, if you play it on stereostim, you should delete .frequency.funscript and .volume.funscript files, and rename .volume-stereostim.funscript to .volume.funscript.

I will add a readme with this. And of course, I can't create mp3 for all of them because if I was creating mp3 for each I would have updated maybe 5 of them because it would take me 3-4x more time, and why? Playing from restim is much better because of calibration, there are no downsides anymore compared to Script Player and there is plenty of material to chose from so you don't have to switch to Script Player. Also you can use restim to bake your own mp3 with your own calibration and pulse/funscript settings.

My whole motivation when starting creating estim scripts for restim was to make its ecosystem attractive enough so that community finally can move away from mp3 files, and with the devices that are cooking right now and new features, I believe we will also forget the stereostim devices soon.

[TheHenchmen]

Late to the party.. does someone have a already converted file he´d like to share for stereo?

I´m really not sure how to do the funscript conversion properly.