[Estim Release] Obsession - Estim Video Tease

[InfamousPlantain]

One resistor is in series (~4 ohms), the other in parallel (I use a 16 ohm, but it depends where you put it).

Oh geez. I see the source of my confusion. Someone's diagram had the high-pass filter's resistor on the "red" wire whereas mantrid's picture actually has the resistor on the "black" wire coming from the amp. Mantrid never said if he has his high-pass on our setups with the 4ohm resistor. Hmm. I'll have to ask him about this.

Sorry, everone, I will take this back to the proper thread. I don't know how everyone else feels, but I do a sprinkling of estim talk useful in these release threads. It's how I was introduced to it.

[InfamousPlantain]

@Rillo,

You did not disappoint. I may not have found some of the content in this video as enjoyable as your webteases (legendary! estim hack, estim lab.. my gotos!) But, the signals did not disappoint as usual and you know what? 40mins for me is just about right! I also love that you started the video with the suggested electrode placements. I find myself constantly trying to visit the thread of the video and digging through just to find the placements. Yes, I know, can probably create a text file, but in video is just great!

Thanks!

[edger477]

I am going to try this in about 10 days. I plan to try to use both the diy box and 2b simultaneously, because this is first tease that has different signals for them, I have a hunch it might be interesting.
Maybe we finally have usecase for Audio & Audio2 output devices from GuideMe

I have to think about electrode setup until then.

[sweden123]

I've tried this twice now, using the lolol version. That final track is so good!
Usually the final track in stim videos never does it for me, but both times I tried it I came as soon as the message shows up, literally instantly as it shows up on screen!

[satn00b]

Yesterday I finally had the time to try this one out - what should I say? A masterpiece!

Thank you

The next one will be much longer

I can't wait. Well I can, but I don't want to. Guess I'll play this one until then

[Rillo]

Yesterday I finally had the time to try this one out - what should I say? A masterpiece!

Thank you

The next one will be much longer

I can't wait. Well I can, but I don't want to. Guess I'll play this one until then

Thank you. I think it will be worth the wait!

[edger477]

Thank you. I think it will be worth the wait!

I am now expecting a tease made up of many short clips and a playlist generator that creates different order of clips and loops to increase replayability :)

[Justrob]

Rillo, Can you add the 2b stim mp3 to Mega?

[edger477]

I tested this last evening. It is probably one of the best estim teases, if not the best on this site (and therefore in universe?). Before I go into details, @Rillo thank you for this, I really like the structure (Estim Laboratory is one of best teases out there IMO) and is really original piece of work in sea of rather similar creations.

Of course I have to re-visit it with some lessons learned:
- on 2B v2.123 (new update to beta) the music input had a weird threshold below which 2B did not produce almost anything and then it would start blasting when ramps up over some level, with occasional bursts in-between. Might be due to bluetooth receiver I used for it. But when I switched to be fed from the same amp I used for DIY - and feeding estim signal into it, it was perfect. So for anyone using just 2B - if you updated to latest beta, try it with lolol estim (haven't tested it with original first as during first watch-through it was receiving music).

- lolol file has a bit high ramp, a workaround would be to set the amp higher and lower the volume in windows to about 80% (I think that would be enough for me, it is almost perfect but almost). When the last part started it was impossible to hold out to the command without skipping a minute.

Of course, your mileage might vary as I used 4-channel amp (2 left 2 right, each pair of l/r feeding into one midstim box), 2B and quite unique electrode setup:
- monopolar butplug as common for one box (as triphase) with channel electrodes on thighs and conductive rubber strip around balls, and 2B (also connected common to buttplug) having + electrode connected to sticky pad on perineum. I find 2B to be a blast there because this one causes erection jumps (without contracting muscles) and on triphase setups you have to balance both channels, but when connected in this config you can only turn this one on 2B channel.
- 2nd box was also in triphase, with one channel on small pad at bottom of shaft (ventral side, just above balls) and common and other channel connected to Mystim Plunging Pete (not sure which one was common because I have reverse switch on box and I tested it on a different funscript-converted file and video and changed it few times to get the proper synced feeling). The B channel of 2B was connected to small pads one on bottom of dorsal side, and other just below the frenulum.

The 2B with latest beta followed ramp-up perfectly and I did check several times if I am correctly feeling it by increasing each channel by 1 or 2 points, then returning to what I set up originally, and I am very very happy with this firmware because even for this file that does not have single carrier frequency or even uniform frequencies through the file it managed to perfectly reflect the output intensity of diy box. This makes it perfect to include in more sessions now as its output is not the same as diy and combining them makes it more interesting.

@Rillo I do not know if you tested 2B with audio from video? If yes, what version of firmware you used? In any case you should definitely try stim audio with 2.123.

[Rillo]

@Rillo I do not know if you tested 2B with audio from video? If yes, what version of firmware you used? In any case you should definitely try stim audio with 2.123.

First, thank you for the kind comments. They keep me going.

I used 2.106. I have not upgraded yet, but will consider it.

[striderbolt]

hey guys, i have uploaded this to pornbay for personal use. I can share the link if anyone interested.

need permission from Rillo is must !

[zebbg69]

I am very excited to be able to release Obsession

And I was very excited to try it! The original tri-phase e-stim track "got me" twice.

Spoiler: show

First around 7:30, near the end of the first long sequence. Then again just before the "Cum" prompt while the girl was riding to orgasm. Shucks, I'll just have to try again to cum on command.

Both orgasms were pretty smooth too, allowing me to ride through for some yummy seconds before turning down the volume. After the first one, I was able to turn the volume back up about 5 minutes later.

I agree with other commenters: this e-stim is masterfully crafted, clearly with the loving touch of an artisan. It's "artisanal e-stim"! (hehe, "artisanal" ends with "anal"... hehe... hehe). Even the head-common wiring worked for me, which is rare!

Electrode details...

Spoiler: show

Following the wiring diagram at the beginning of the video, my interpretation:
(Common = A- and B- joined using tri-phase switch on my BT-Stim box)
A- head loop, CR with wire inserted
B- small TENS pad (1.25" circle) on top of shaft base
A+ anal monopolar, CR length with wire inserted, bent double
B+ TENS pad (2" square) under scrotum behind balls
Stretchy silicone ring around balls keeps skin tight for B+ pad to stick just above it on underside of scrotum.

Key to making the head-common work was placing A- and B- on separate electrodes, both on that dorsal nerve, to spread out the Common current. I've avoided head-common for a long time because the intensity was always too high for me, but I've been revisiting lately and having some luck with dual electrodes like this. Putting the B- pad on the dorsal nerve makes it feel a lot like a head electrode, so it's similar to having more surface area on the head.

I'm glad I complied with the wiring instructions at the beginning of the video, because I was wired up a completely different way from earlier stimming and didn't feel like stopping the video, but I thought, it's my first play-through and people said this e-stim is special, so let's do it the way the creator intended. The balance among A/B/Common was really great throughout the video.

Now I am very excited to try the lolol2 tri-phase version.

And then I will be very excited to try the 2B on the music track. I've only tried the 2B with music a couple of times, and it didn't go that well, so I am very curious about this.

Well done, Rillo! **APPLAUSE** Thanks for this instant classic!

[workstream]

I've generated a quick music based funscript:

https://mega.nz/file/3vZiEDhD#Qm-o1WpAK ... 2AQhwtZ8bI

[frenchdude]

It seems like I’ve never said how much I love this gem, even though it’s one of my all-time favorites...

First of all : what a tease !
Then I love the choice of scenes (and not only the finale one with Caprice )
And I definitely love the e-stim file
Of course funscript conversions can be nice, especially with the latest software developments, but for me nothing is better than a masterfully handcrafted file.
I usually find your e-stim files to be of the challenging type (with a special mention for Club Nocturn ), and they always are my go-to when I’m in a kinky mood.

Thank you so much, Rillo, for all your fantastic creations