Here's a DIY anal electrode for estim based on an older version of the Aneros MGX Trident.
The construction is done with 1/4" or 6mm copper tape, smoothed out as best you can.
The edges are sealed with clear nail polish.
Nail polish is also used to insulate the lower visible half of the copper strip.
Then it's mildly sanded with fine 400 grit wet or dry sandpaper to make sure there are no rough edges.
It should feel completely smooth.
The electrical connection is two wraps of bare copper wire wrapped around the foil base, hot glued and taped. I didn't feel the need to solder that connection.
I have some hot glue on the tabs to make them a little larger and more comfortable for me.
I agree and love the aneros range of toys I'm very curious about the combination with estim ...
This is a mod I want to do since a long time, I would appreciate your detailed feedback about the sensations !
tip for smoothing metallic tape - use a hard, round item like the shaft of a screwdriver to run over the edges and burnish them before any sanding.
The ElectraStim Habanero has a pretty great shape for prostate massage, but its contact points are along the sides. I built one of these with a Progasm, but it ended up not that comfortable to sit on, longer-term.
Bluemoon wrote: ↑Tue Nov 23, 2021 10:12 am
I agree and love the aneros range of toys I'm very curious about the combination with estim ...
This is a mod I want to do since a long time, I would appreciate your detailed feedback about the sensations !
It's hard to describe but it combines the prostate stimulation of the Aneros and the prostate contractions of estim.
