What I find really weird is you received the same busy response 3 times in a row, are you using version b.2.1 or later?DemonXia wrote:Thanks, that was the problem.1885 wrote:I think you may have to wait until the domme types the "Please Input Day for TimeStamp... Example: Sun, Mon, Tue, Wed, Thur, Wed, Fri, or Sat" message before entering TSResetDemonXia wrote:Hi,
What am I doing wrong?
Swiss, TeaseAI Personality [Now with downloads]
Moderator: 1885
- opiate
- Explorer At Heart
- Posts: 164
- Joined: Thu Mar 15, 2012 5:20 am
- Gender: Male
- Sexual Orientation: Straight
- I am a: Switch
Re: Swiss, TeaseAI Personality
- DemonXia
- Explorer
- Posts: 35
- Joined: Sun Aug 23, 2009 8:22 pm
- Gender: Female
- Sexual Orientation: Lesbian
- I am a: Submissive
- Location: Zeeland, The Netherlands
Re: Swiss, TeaseAI Personality
Hi,
Another issue popped up during the Worship and Denial game.
"#_OM4_DTaunts.txt" was not found in the Vocabulary folder.
I found the file "#_OM4DTaunts.txt" and made a copy and named it "#_OM4_DTaunts.txt" to solve the issue.
Another issue popped up during the Worship and Denial game.
"#_OM4_DTaunts.txt" was not found in the Vocabulary folder.
I found the file "#_OM4DTaunts.txt" and made a copy and named it "#_OM4_DTaunts.txt" to solve the issue.
- DemonXia
- Explorer
- Posts: 35
- Joined: Sun Aug 23, 2009 8:22 pm
- Gender: Female
- Sexual Orientation: Lesbian
- I am a: Submissive
- Location: Zeeland, The Netherlands
Re: Swiss, TeaseAI Personality
Version b2.1 in Tease AI Patch 42opiate wrote:What I find really weird is you received the same busy response 3 times in a row, are you using version b.2.1 or later?DemonXia wrote:Thanks, that was the problem.1885 wrote:
I think you may have to wait until the domme types the "Please Input Day for TimeStamp... Example: Sun, Mon, Tue, Wed, Thur, Wed, Fri, or Sat" message before entering TSReset
- DemonXia
- Explorer
- Posts: 35
- Joined: Sun Aug 23, 2009 8:22 pm
- Gender: Female
- Sexual Orientation: Lesbian
- I am a: Submissive
- Location: Zeeland, The Netherlands
Re: Swiss, TeaseAI Personality
Another problem with the Denial and Worship game.
The game was going on and on for like 45 minutes and it was starting to annoy me, so I checked the script to see what would be needed for it to progress, maybe there is something I have to do like edge or whatnot. I found that after 3 denial and 3 worship rounds it should stop, but for me that wasn't working. I checked what the issue might be and found that you where setting and tracking variables WD-WCount and WD-DCount, but you where adding to variables DW-WCount and DW-DCount.
I changed the following lines in "OpiateMod4_New.txt" to fix it for me:
The game was going on and on for like 45 minutes and it was starting to annoy me, so I checked the script to see what would be needed for it to progress, maybe there is something I have to do like edge or whatnot. I found that after 3 denial and 3 worship rounds it should stop, but for me that wasn't working. I checked what the issue might be and found that you where setting and tracking variables WD-WCount and WD-DCount, but you where adding to variables DW-WCount and DW-DCount.
I changed the following lines in "OpiateMod4_New.txt" to fix it for me:
Code: Select all
(189) #_OM4_WTaunts @ChangeVar[DW-WCount]=[DW-WCount]+[1]
(Changed to) #_OM4_WTaunts @ChangeVar[WD-WCount]=[WD-WCount]+[1]
(207) #_OM4_DTaunts @ChangeVar[DW-DCount]=[DW-DCount]+[1]
(Changed to) #_OM4_DTaunts @ChangeVar[WD-DCount]=[WD-DCount]+[1]
(222) So, we've worshipped #Boobs for @ShowVar[DW-WCount] rounds
(Changed to) So, we've worshipped #Boobs for @ShowVar[WD-WCount] rounds
(223) And we've #Ached for #Ass for @ShowVar[DW-DCount] rounds
(Changed to) And we've #Ached for #Ass for @ShowVar[WD-DCount] rounds
- opiate
- Explorer At Heart
- Posts: 164
- Joined: Thu Mar 15, 2012 5:20 am
- Gender: Male
- Sexual Orientation: Straight
- I am a: Switch
Re: Swiss, TeaseAI Personality
Thank you, thank you... I had not gotten around to testing the W&D side of that script yet, I will post the patched version with a few more updates I've made very soon. Thanks again.DemonXia wrote:Another problem with the Denial and Worship game.
The game was going on and on for like 45 minutes and it was starting to annoy me, so I checked the script to see what would be needed for it to progress, maybe there is something I have to do like edge or whatnot. I found that after 3 denial and 3 worship rounds it should stop, but for me that wasn't working. I checked what the issue might be and found that you where setting and tracking variables WD-WCount and WD-DCount, but you where adding to variables DW-WCount and DW-DCount.
I changed the following lines in "OpiateMod4_New.txt" to fix it for me:Code: Select all
(189) #_OM4_WTaunts @ChangeVar[DW-WCount]=[DW-WCount]+[1] (Changed to) #_OM4_WTaunts @ChangeVar[WD-WCount]=[WD-WCount]+[1] (207) #_OM4_DTaunts @ChangeVar[DW-DCount]=[DW-DCount]+[1] (Changed to) #_OM4_DTaunts @ChangeVar[WD-DCount]=[WD-DCount]+[1] (222) So, we've worshipped #Boobs for @ShowVar[DW-WCount] rounds (Changed to) So, we've worshipped #Boobs for @ShowVar[WD-WCount] rounds (223) And we've #Ached for #Ass for @ShowVar[DW-DCount] rounds (Changed to) And we've #Ached for #Ass for @ShowVar[WD-DCount] rounds
- opiate
- Explorer At Heart
- Posts: 164
- Joined: Thu Mar 15, 2012 5:20 am
- Gender: Male
- Sexual Orientation: Straight
- I am a: Switch
Re: Swiss, TeaseAI Personality
Swiss updated, main post has also had a ton of information added to it
- DemonXia
- Explorer
- Posts: 35
- Joined: Sun Aug 23, 2009 8:22 pm
- Gender: Female
- Sexual Orientation: Lesbian
- I am a: Submissive
- Location: Zeeland, The Netherlands
Re: Swiss, TeaseAI Personality
Hi,
A couple of errors I've found.
Every time the I've received this error Glitter stopped working and the last thing displayed is: "What are some of your favourite ways to tease Amanda?"
I also found a couple of vocabulary reference errors.
Tease AI couldn't find the following:
#_IKnowYouLongTocome.txt
#_IKnowYouLongTocome_ST_2L.txt
#Command.txt
#comeForMe.txt
A couple of errors I've found.
I posted this error in the Tease AI bug reports thread, but it looks like it is caused by a Glitter script. OpiateT3.txt I think.DemonXia wrote: Index was outside the bounds of the array
Code: Select all
See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box. ************** Exception Text ************** System.IndexOutOfRangeException: Index was outside the bounds of the array. at Tease_AI.Form1.StatusUpdatePost() in C:\Users\Elijah\Documents\Visual Studio 2010\Projects\Tease AI\Tease AI\Form1.vb:line 7509 at Tease_AI.Form1.UpdatesTimer_Tick(Object sender, EventArgs e) in C:\Users\Elijah\Documents\Visual Studio 2010\Projects\Tease AI\Tease AI\Form1.vb:line 8019 at System.Windows.Forms.Timer.OnTick(EventArgs e) at System.Windows.Forms.Timer.TimerNativeWindow.WndProc(Message& m) at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam) ************** Loaded Assemblies ************** mscorlib Assembly Version: 4.0.0.0 Win32 Version: 4.0.30319.34209 built by: FX452RTMGDR CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/mscorlib.dll ---------------------------------------- Tease AI Assembly Version: 1.0.0.0 Win32 Version: 1.0.0.0 CodeBase: file:///K:/Tease%20AI/Tease%20AI.exe ---------------------------------------- Microsoft.VisualBasic Assembly Version: 10.0.0.0 Win32 Version: 12.0.51209.34209 built by: FX452RTMGDR CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/Microsoft.VisualBasic/v4.0_10.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualBasic.dll ---------------------------------------- System.Windows.Forms Assembly Version: 4.0.0.0 Win32 Version: 4.0.30319.34251 built by: FX452RTMGDR CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll ---------------------------------------- System.Drawing Assembly Version: 4.0.0.0 Win32 Version: 4.0.30319.34209 built by: FX452RTMGDR CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll ---------------------------------------- System Assembly Version: 4.0.0.0 Win32 Version: 4.0.30319.34238 built by: FX452RTMGDR CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll ---------------------------------------- System.Runtime.Remoting Assembly Version: 4.0.0.0 Win32 Version: 4.0.30319.34245 built by: FX452RTMGDR CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Runtime.Remoting/v4.0_4.0.0.0__b77a5c561934e089/System.Runtime.Remoting.dll ---------------------------------------- System.Speech Assembly Version: 4.0.0.0 Win32 Version: 4.0.30319.34209 built by: FX452RTMGDR CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Speech/v4.0_4.0.0.0__31bf3856ad364e35/System.Speech.dll ---------------------------------------- AxInterop.WMPLib Assembly Version: 1.0.0.0 Win32 Version: 1.0.0.0 CodeBase: file:///K:/Tease%20AI/AxInterop.WMPLib.DLL ---------------------------------------- Interop.WMPLib Assembly Version: 1.0.0.0 Win32 Version: 1.0.0.0 CodeBase: file:///K:/Tease%20AI/Interop.WMPLib.DLL ---------------------------------------- System.Configuration Assembly Version: 4.0.0.0 Win32 Version: 4.0.30319.34209 built by: FX452RTMGDR CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll ---------------------------------------- System.Xml Assembly Version: 4.0.0.0 Win32 Version: 4.0.30319.34234 built by: FX452RTMGDR CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll ---------------------------------------- Microsoft.GeneratedCode Assembly Version: 1.0.0.0 Win32 Version: 4.0.30319.34234 built by: FX452RTMGDR CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll ---------------------------------------- System.Core Assembly Version: 4.0.0.0 Win32 Version: 4.0.30319.34209 built by: FX452RTMGDR CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dll ---------------------------------------- Microsoft.mshtml Assembly Version: 7.0.3300.0 Win32 Version: 7.0.3300.0 CodeBase: file:///C:/Windows/assembly/GAC/Microsoft.mshtml/7.0.3300.0__b03f5f7f11d50a3a/Microsoft.mshtml.dll ---------------------------------------- ************** JIT Debugging ************** To enable just-in-time (JIT) debugging, the .config file for this application or computer (machine.config) must have the jitDebugging value set in the system.windows.forms section. The application must also be compiled with debugging enabled. For example: <configuration> <system.windows.forms jitDebugging="true" /> </configuration> When JIT debugging is enabled, any unhandled exception will be sent to the JIT debugger registered on the computer rather than be handled by this dialog box.
Every time the I've received this error Glitter stopped working and the last thing displayed is: "What are some of your favourite ways to tease Amanda?"
I also found a couple of vocabulary reference errors.
Tease AI couldn't find the following:
#_IKnowYouLongTocome.txt
#_IKnowYouLongTocome_ST_2L.txt
#Command.txt
#comeForMe.txt
- DemonXia
- Explorer
- Posts: 35
- Joined: Sun Aug 23, 2009 8:22 pm
- Gender: Female
- Sexual Orientation: Lesbian
- I am a: Submissive
- Location: Zeeland, The Netherlands
Re: Swiss, TeaseAI Personality
Hi,
Here are a couple of problems I found which I think are because of Tease AI Patch 45, because I haven't seen them before.
Chatlogs are not being saved properly, because at the end of the tease the chat clears and she then says: "Sakura: I look forward to hearing from you *giggles evilly* ". This is then all the text saved in the chatlogs. This might be a Patch 45 bug and not a Swiss specific bug, I'm not sure.
The first stroking session seems to go on forever. When I finally get permission to edge after begging a couple of times, she lets me edge and stop and than assumes I'm still stroking, while begging after this point results in her saying that she isn't letting me do anything. The metronome is also not running after the edge. The way to get out of this is to use the safeword and then resume after that. After the use of the safeword everything seems to work fine.
Here are a couple of problems I found which I think are because of Tease AI Patch 45, because I haven't seen them before.
Chatlogs are not being saved properly, because at the end of the tease the chat clears and she then says: "Sakura: I look forward to hearing from you *giggles evilly* ". This is then all the text saved in the chatlogs. This might be a Patch 45 bug and not a Swiss specific bug, I'm not sure.
The first stroking session seems to go on forever. When I finally get permission to edge after begging a couple of times, she lets me edge and stop and than assumes I'm still stroking, while begging after this point results in her saying that she isn't letting me do anything. The metronome is also not running after the edge. The way to get out of this is to use the safeword and then resume after that. After the use of the safeword everything seems to work fine.
- opiate
- Explorer At Heart
- Posts: 164
- Joined: Thu Mar 15, 2012 5:20 am
- Gender: Male
- Sexual Orientation: Straight
- I am a: Switch
Re: Swiss, TeaseAI Personality
It sounds like something may be getting hung up somewhere, unfortunately I've been down and out of working on this ever since school started back up. I'm not sure when I'll be able to make time to get back to working on it, but don't think Swiss is an abandoned project. Life calls lol.DemonXia wrote:Hi,
Here are a couple of problems I found which I think are because of Tease AI Patch 45, because I haven't seen them before.
Chatlogs are not being saved properly, because at the end of the tease the chat clears and she then says: "Sakura: I look forward to hearing from you *giggles evilly* ". This is then all the text saved in the chatlogs. This might be a Patch 45 bug and not a Swiss specific bug, I'm not sure.
The first stroking session seems to go on forever. When I finally get permission to edge after begging a couple of times, she lets me edge and stop and than assumes I'm still stroking, while begging after this point results in her saying that she isn't letting me do anything. The metronome is also not running after the edge. The way to get out of this is to use the safeword and then resume after that. After the use of the safeword everything seems to work fine.
-
- Explorer
- Posts: 32
- Joined: Sun Sep 20, 2015 5:55 pm
- Gender: Male
- Sexual Orientation: Straight
- I am a: Switch
Re: Swiss, TeaseAI Personality
I have to say, I wasn't originally sure about switching to Swiss, as I did quite a few sessions with my WTEx/PNG mix domme...
But I love what you did here, Opiate. I absolutely adore this little minx, probably more than I should
By all means, please keep writing new stuff for her if you can. There are a few bugs though I think, you missed the #IKnew vocabulary entry - not something that can't be fixed in a few seconds, but I thought you might want to know. I also had a few instances at the beginning where she instructed me not to touch myself and a few lines after that, she told me to stop touching. This seems like a bug, or at least a badly written vocabulary entry.
But other than that, great job
Oh, and BTW, in case you haven't noticed: You can create your own tags, you just need to paste them manually at the end of an entry in the LocalImageTags.txt. Thought it might help you, seeing how you use them in the tease so far.
But I love what you did here, Opiate. I absolutely adore this little minx, probably more than I should
By all means, please keep writing new stuff for her if you can. There are a few bugs though I think, you missed the #IKnew vocabulary entry - not something that can't be fixed in a few seconds, but I thought you might want to know. I also had a few instances at the beginning where she instructed me not to touch myself and a few lines after that, she told me to stop touching. This seems like a bug, or at least a badly written vocabulary entry.
But other than that, great job
Oh, and BTW, in case you haven't noticed: You can create your own tags, you just need to paste them manually at the end of an entry in the LocalImageTags.txt. Thought it might help you, seeing how you use them in the tease so far.
- opiate
- Explorer At Heart
- Posts: 164
- Joined: Thu Mar 15, 2012 5:20 am
- Gender: Male
- Sexual Orientation: Straight
- I am a: Switch
Re: Swiss, TeaseAI Personality
I can't believe it's really been so long since I've had Swiss working, and believe me, I hate not being able to update this damn thing, and she is just currently unusable. I'm not even sure how much I've changed/fixed since the last update I made.Zoran wrote:I have to say, I wasn't originally sure about switching to Swiss, as I did quite a few sessions with my WTEx/PNG mix domme...
But I love what you did here, Opiate. I absolutely adore this little minx, probably more than I should
By all means, please keep writing new stuff for her if you can. There are a few bugs though I think, you missed the #IKnew vocabulary entry - not something that can't be fixed in a few seconds, but I thought you might want to know. I also had a few instances at the beginning where she instructed me not to touch myself and a few lines after that, she told me to stop touching. This seems like a bug, or at least a badly written vocabulary entry.
But other than that, great job
Oh, and BTW, in case you haven't noticed: You can create your own tags, you just need to paste them manually at the end of an entry in the LocalImageTags.txt. Thought it might help you, seeing how you use them in the tease so far.
The #IKnew vocab file is fixed, just not released, and alot of the wierd Chastity and Start/Stop filters have been fixed and tested, I finally had some time to play around with a few start scripts I've been working on, and have been updating my modules. Somewhere along the way I broke ALL of them... At the same damn time. I finally had a day off today, and I'm hoping that I'll actually be able to finish a test run. Thanks for the feedback, it goes a long way towards making me want to invest some more time into getting this working again. Hopefully, I'll be able to find some more time to work on her for a fall update.
- opiate
- Explorer At Heart
- Posts: 164
- Joined: Thu Mar 15, 2012 5:20 am
- Gender: Male
- Sexual Orientation: Straight
- I am a: Switch
Re: Swiss, TeaseAI Personality
Well, I have her finishing sessions again, but a lot of things are still up in the air and I have about a half dozen half finished scripts. I've also found that changes in scripting will inherently make Swiss unusable once 1885 releases Patch 48. So far, the changes I've heard about will make future scripting a lot easier, but I will have to look into updating most of Swisses' modules once the new version of TeaseAI is released.
I think I'm going to hold off and aim to get a release out over Winter Break, rather than trying to rush out of a bunch of half realized scripts that I know won't work in a couple of weeks.
I think I'm going to hold off and aim to get a release out over Winter Break, rather than trying to rush out of a bunch of half realized scripts that I know won't work in a couple of weeks.
-
- Explorer At Heart
- Posts: 340
- Joined: Mon Jul 21, 2014 12:34 am
- Sexual Orientation: Open to new ideas!
- I am a: Submissive
- Dom/me(s): nicole
- Location: Canada
Re: Swiss, TeaseAI Personality
some problem with an EmoteZ.txt ??? help please?:(
Edit- its also giving me errors when i type sometimes and then the mistress doesnt speak again..
Edit- its also giving me errors when i type sometimes and then the mistress doesnt speak again..
- opiate
- Explorer At Heart
- Posts: 164
- Joined: Thu Mar 15, 2012 5:20 am
- Gender: Male
- Sexual Orientation: Straight
- I am a: Switch
Re: Swiss, TeaseAI Personality
The EmoteZ seems to be a change I was making that never was finished
I will try to wrap up a few loose ends and release a more stable build over the next few days.
I will try to wrap up a few loose ends and release a more stable build over the next few days.
-
- Explorer At Heart
- Posts: 429
- Joined: Sun Feb 26, 2012 8:34 pm
- Gender: Male
- Sexual Orientation: Straight
- Location: UK
Re: Swiss, TeaseAI Personality
I downloaded Swiss a while ago but finally got around to trying it this morning.. and she's at work
What time does she leave?
Although I must say it's making me more excited to find out what the rest of the personality is like if you've even coded a schedule in
What time does she leave?
Although I must say it's making me more excited to find out what the rest of the personality is like if you've even coded a schedule in
Who is online
Users browsing this forum: Rar1197, TanyaHumble and 43 guests