I tried both arrangements, with no change in behavior, but I realized something that I might be doing wrong. I have been using a bipolar plug with one negative channel to each pole of the electrode. I connected these channels with another cable at the stim box, and I had been assuming that this arr...

Also try measuring resistance between in and outputs. There should be no connection there, if you do measure any resistance there then your transformers are not the isolating kind and should not be used. I had a pair of transformers that where wound as auto transformers (meaning there is a shared p...

I traced the wiring and everything looks OK. With the plastic parts you are using, the nuts touching doesn't matter. It also doesn't explain the symptoms. If the channels are shorting out you would see no signal on that channel, this doesn't match what you are seeing. You are supposed to connect th...

I was in danger of hijacking the Restim thread , so I've opened a new one here. @diglet, @Kelvinator and @47dahc: I checked all the possible connections with the continuity check feature on my multimeter. The only notable reading came from the input connections, ie, the black and red channels going ...

Indeed it is the opposite of what is supposed to happen. What you describe is exactly what I feel with all zero calibration settings, reducing the neutral setting should gradually equalize the sensations at top and bottom position. I think you can only get this behavior if your computer outputs a m...

For Lorada, Here are some suggestions: 1. Check your DIY stim box signals in a non-Restim mode using these 30 second test files: 30 Sec Stereo Ch 1 Only Track.mp3, 30 Sec Stereo Ch 2 Only Track.mp3, and 30 Sec Stereo Track.mp3 found in: https://mega.nz/folder/5KdCCD7K#1U1ByzDV1cOTrYufR5GCuw You sho...

I've been trying to calibrate Restim according to the directions on the wiki, but I have a problem: When playing the circle pattern, I get plenty of sensation when the green dot is on the upper half of the circle, but absolutely no sensation on the lower half. I try to adjust by clicking the lower ...

I've been trying to calibrate Restim according to the directions on the wiki, but I have a problem: When playing the circle pattern, I get plenty of sensation when the green dot is on the upper half of the circle, but absolutely no sensation on the lower half. I try to adjust by clicking the lower p...