I..I don't know what happened. I got current through one channel but not another, so I figured after testing the other components of that non-functional one, that it had to have been the wiring of the audio inputs and volume knobs. https://drive.google.com/file/d/1M576AXGRucD7WwAyChbCjm3HSn1jE4dD/vi...

https://drive.google.com/file/d/1K8IIdp5nTIlCh-7oYpje-nr2CmLGvuiw/view?usp=drivesdk I FINALLY FUCKIN GOT CURRENT AFTER A MONTH OF WAITING TO BY A NEW AMP! Bonus, the transformers and the power supply are fine though I've bought extras along with the amp just in case but still...wheewww. Now I can f...

I had it working...I finally had it outputting current when I realized my electrode wires were bad and replaced them. Then, in my excitement, I wired the resistors to the transformer in the wrong polarity and now I think I've not only fried the amp since it started clicking on me when I turned it up...

NOPE, That wasn't it either. Despite having dropped another $50 on replacement parts, it still doesn't put out any amps. You know what? Screw it, imma go back to pre-built amps and figure out a way to have dual volume knobs and a tri-phase switch unless anyone else can give me a suggestion on what e...

Im building this based on lolo2's second iteration with this board, but I was trying different configurations to see if that did anything. This switch is 3PDT which I have wired so "on" let's the current through the wires for power and "off" let's the current only through the cha...

Here is the switch in question.

(Sigh)...okay, I've tried to see what might be wrong with the transformers, and they're working fine. As a matter of fact, I've tested everything else twice over and saw that the amp was bungled and I had ordered the wrong sized parallel resistors. So I ordered a new amp plus the proper resistors, a...

Just measured the voltage output of the amp itself and now I'm getting 12.5-12.6V. I also confirmed the pots worked so there's that. But when i try feeling for amps from the transformers (one's input to 4Ω, the other's at 8, and I checked the outputs at 0.5W-5W and 1.5W-10W) and nothing's coming fro...

Uhh...lads? Did I fuck up with soldering directly to the pins on the amp because I thought the wire that came with it was too thin? I'm getting 0.8V out of it but no amps.[img][https://drive.google.com/file/d/1F776aZ ... p=drivesdk]