Milovana.com

lolol2 wrote: Wed Apr 29, 2020 7:29 pm Yeah the randomness of the flash teases feels sometimes a bit weird!
Sometimes it feels like I always get the same girls... but I checked that multiple times... the code is correct to pick this totally random.

Truly random often does not feel random to humans.

https://labs.spotify.com/2014/02/28/how ... fle-songs/

Or, to put it another way that's also suggested by that link, sometimes true randomness isn't what you actually want.

Something like using persistent storage to track the last few choices per floor over sessions and avoid repeats would... I'm assuming be difficult to impossible to implement at this point. (Can flash teases even use persistent storage? I've only worked with EOS on the creation side of things.) But it seems like something that would be worth considering for anyone making a structurally similar tease in the future.

Yes I have already planned to use persistent storage in my new tease to get more or less randomness into the tease.
Sadly the persistent storage of EOS is very little to save everything in a simple way, already requested some more space in the EOS thread.

In the flash tease there was no option for this... there wasn't even any option to use variables.

First sound based estim tease I did. OMG I have been missing out. I tried twice to finish this one but no luck. I though having it high enough to be more painful than pleasurable would have helped but nope. Just curious is there anything like cock hero videos but setup for audio based estim?

Welcome in the world of estim.

You can check this thread for some sources or just search for "estim" on the Milovana search.
viewtopic.php?f=1&t=22138

There are some sources for CH files or with the funscript converter tool you can convert every funscript from http://realtouchscripts.com into estim files.
There are also a lot of scripts for CH movies, so you can create your own files very easy.

Have fun for the next weeks checking out all that amazing stuff.

are the pain levels higher in the evil setting

Nope, the old flash editor in the past hadn't any ability to change the volumes like EOS can do.

2B Mod by bobross235 for the Tower tease... maybe someone want to try.
Just post it here additional if people don't have subscribed the other thread.

viewtopic.php?f=2&p=288055

Just a question, did you update the default pain files recently? I tried a dominatrix room in the tower with my 2B and I could actually feel it, which is unusual.

It's possibly it was just that specific mistress tho.

No changes made, I think the last change was over a year ago.
Maybe a specific misstress or the 2B firmware made some changes if you updated you device.

Xyrexus wrote: Mon Dec 07, 2020 7:36 pm Just a question, did you update the default pain files recently? I tried a dominatrix room in the tower with my 2B and I could actually feel it, which is unusual.

It's possibly it was just that specific mistress tho.

I have a 2B too and it was most definitely a specific mistress, some of them use longer pain files which is why you could feel 'something', they are just long enough that the 2B doesn't completely filter them out.

Having some trouble getting any signal from this file. I have a DIY unit and have found that with other files. It works on some but can be very zappy and painful with other files. I'm wondering if I have the wrong transformer. The unit I built was listed on another site and suggested these transformers.
https://www.e-sonic.com/product-detail/ ... p=45320266
Could this be the problem?

buzzjolt wrote: Sat Jan 16, 2021 1:17 am Having some trouble getting any signal from this file. I have a DIY unit and have found that with other files. It works on some but can be very zappy and painful with other files. I'm wondering if I have the wrong transformer. The unit I built was listed on another site and suggested these transformers.
https://www.e-sonic.com/product-detail/ ... p=45320266
Could this be the problem?

The transformer is good.

If you have a 3-phase setup, it could be an issue with the electrodes. Files with phase modulation can cause a strong current variation at the common electrode. That's why the common electrode should be the largest one (lowest current density).

You can check this by disconnecting one channel. If the zappines vanishes, it is the described effect.

Hey all, I've recently got my first estim device, a 3rdh. I've only got the pads and cables that it came with (two cables and four TENS pads). How would you recommend I set up for this tease without triphase?

And a related question, if I wanted to use triphase, what else would I need to buy? Would I need a special cable, or is there an adapter I could use instead? If an adapter works, I assume I'd need a third cable, but what exactly would I need to look at for this?

Sorry for all the questions, I'm totaly new to this, and thanks for your time!

GoblinMan wrote: Mon Jan 18, 2021 4:08 am Hey all, I've recently got my first estim device, a 3rdh. I've only got the pads and cables that it came with (two cables and four TENS pads). How would you recommend I set up for this tease without triphase?

And a related question, if I wanted to use triphase, what else would I need to buy? Would I need a special cable, or is there an adapter I could use instead? If an adapter works, I assume I'd need a third cable, but what exactly would I need to look at for this?

Sorry for all the questions, I'm totaly new to this, and thanks for your time!

Welcome to the party! Here are a couple of pointers.

It's a long, shallow learning curve. You're probably going to get frustrated and put it down and wonder what the hell everyone is making a big fuss about, and then you'll pick it up and get a setting or two right and go 'ohhhhh, THAT's what they're talking about'. And it only gets better from there.

I'd highly recommend getting some conductive rubber loops. They're incredibly versatile and, if you're handy, you can get a decent length and just cut it to size for your liking. I picked up the 8mm thick with some 12mm spring clamps and used a dremel to chamfer the ends down to a size that would fit in the clamps. It took some trial and error, and you can buy them completely pre-made to save the hassle.

I'm also a fan of some of the conductive cloths 'tubes' that are out there. They spread out the stimulation a lot more and are remarkably stretchy when wet. I haven't seen a lot of others mention these, so I may be in the minority here.

As for tri-phase, there are cables that are sold as 'tri-phase cables' and they're crazy expensive for what they are. Unless someone here can tell me why I'm wrong, all a tri-phase cable is is a cable with your positive leads going from your two positives on your e-stim device to the two positive electrodes, with the 2 negatives going from the e-stim device to a common negative electrode. I just hacked off the ends of some pads and some tens leads, soldered (or even just twisted and electrical taped) two female to one male lead to make a male-female splitter, and use that from my e-stim leads to combine the two negatives down to a single lead. Alternatively, if you're using loops, you can plug the two negative leads into the two ends of your loop to get a very similar effect.

And, as always, I'll add my final piece of advice; take it slowly. It's better to feel nothing at all than to feel you zapping your junk WAY too much.

Here's a couple of sites that specialize in e-Stim stuff. They're not very sophisticated sites, but they ship fast and have never let me down. There's also a rapidly increasing selection available on Amazon.
(I have no affiliation with either site below other than being a happy customer)

happystim-usa.com

currentpleasures.com/