Double DunWa Ball Butt Plug from Dungeon Delights
Posted: Fri Feb 18, 2011 6:41 pm
Review of Double DunWa Ball Butt Plug from Dungeon Delights.
2" balls with clear coat, $134 + tax.
http://www.dungeondelights.com/store/pr ... cts_id=134
This is a steel butt plug consisting of two balls, one directly atop the other, with a shaft terminating in a T.
oo-| <-My lovely ASCII art.
Each ball is hollow and contains a solid steel ball that rolls freely within the hollow ball.
The plug is coated with a clear clear coat, but color options exist.
I got the one with 2" diameter balls.
The effect is that with almost any motion, the interior balls roll around within the hollow spheres. Since it is steel, it makes a lot of noise - even inside of you. Don't expect to wear this undetected in a quiet environment.
Initially I found the size daunting, but I adjusted pretty much after the first time and not had any problems inserting and removing since. This is my own training, of course. The narrow shaft is very nice. Despite its rigidness, the small diameter shaft makes it very comfortable to wear for extended periods. The small shaft makes it much easier to expell gas. However, the bar of the T is not always comfortable. Depending on the depth of insertion, the crossbar can press uncomfortably on the perenium. Yet, this can often be adjusted easily by repositioning. Also, when I wear it standing for a little while at first, I don't have this problem. It is when inserting and then moving directly to prone or sitting. Again, it's all about positioning and the body's adjustment. Were I the designer, I would have curved the T bar a bit.
Because it is so loud, there's no forgetting that it is there and it takes very little movement for the interior balls to roll around. This is fun and exciting. It's fun to jump up and down and hear/feel the balls crash into the walls of the plug.
Insertion really hits the sweet spot with my prostate. I rarely insert witout being milked slightly.
I thought that the movement of the balls would be more arousing than it has been for me. Like most things, I think you get used to it after wearing it for awhile. My wearing has been around the house. It'd be great to wear to a loud dance club. If you're into embarassment, then wear it (make your sub wear it) to quieter places.
Because it is so rigid, steel, mind you, once your sphincter relaxes a bit, it is a fantastic toy with which to milk. Manipulating it via the T is easy. Expelling only one ball, clenching in the crevice between the balls, you can really milk the prostate and feel the movement of the balls inside.
There is a small hole in one end of the T bar. I have not used it for anything, but one could easily attach a tail or bell. I've been tempted to tie string to it and attach that to my belt so that the plug tilts forward more when I'm wearing it, just for variety.
The most significant drawback to this toy is that, in my case, the clear coat began to crack soon after purpose. Now, there are no chips out of the coat, just spiderlike lines. It is still smooth to insert. However, the cracks are enough to allow some of the steel to be exposed to fluid and light. The result is that the toy has discollored some, showing some evidence of rust. Always clean and dry soon after use. I don't know if the other colored coats would be sturdier than the clear clear coat. Since I haven't dropped it, I suspect that the cracks are from the impact of the interior balls, but who knows?
I recommend this toy. It is clear that it is made by skilled hands. The packaging was plain, though it makes noise since you cannot stop the interior balls from rolling around.
A less expensive option uses only one ball.
Enjoy!
2" balls with clear coat, $134 + tax.
http://www.dungeondelights.com/store/pr ... cts_id=134
This is a steel butt plug consisting of two balls, one directly atop the other, with a shaft terminating in a T.
oo-| <-My lovely ASCII art.
Each ball is hollow and contains a solid steel ball that rolls freely within the hollow ball.
The plug is coated with a clear clear coat, but color options exist.
I got the one with 2" diameter balls.
The effect is that with almost any motion, the interior balls roll around within the hollow spheres. Since it is steel, it makes a lot of noise - even inside of you. Don't expect to wear this undetected in a quiet environment.
Initially I found the size daunting, but I adjusted pretty much after the first time and not had any problems inserting and removing since. This is my own training, of course. The narrow shaft is very nice. Despite its rigidness, the small diameter shaft makes it very comfortable to wear for extended periods. The small shaft makes it much easier to expell gas. However, the bar of the T is not always comfortable. Depending on the depth of insertion, the crossbar can press uncomfortably on the perenium. Yet, this can often be adjusted easily by repositioning. Also, when I wear it standing for a little while at first, I don't have this problem. It is when inserting and then moving directly to prone or sitting. Again, it's all about positioning and the body's adjustment. Were I the designer, I would have curved the T bar a bit.
Because it is so loud, there's no forgetting that it is there and it takes very little movement for the interior balls to roll around. This is fun and exciting. It's fun to jump up and down and hear/feel the balls crash into the walls of the plug.
Insertion really hits the sweet spot with my prostate. I rarely insert witout being milked slightly.
I thought that the movement of the balls would be more arousing than it has been for me. Like most things, I think you get used to it after wearing it for awhile. My wearing has been around the house. It'd be great to wear to a loud dance club. If you're into embarassment, then wear it (make your sub wear it) to quieter places.
Because it is so rigid, steel, mind you, once your sphincter relaxes a bit, it is a fantastic toy with which to milk. Manipulating it via the T is easy. Expelling only one ball, clenching in the crevice between the balls, you can really milk the prostate and feel the movement of the balls inside.
There is a small hole in one end of the T bar. I have not used it for anything, but one could easily attach a tail or bell. I've been tempted to tie string to it and attach that to my belt so that the plug tilts forward more when I'm wearing it, just for variety.
The most significant drawback to this toy is that, in my case, the clear coat began to crack soon after purpose. Now, there are no chips out of the coat, just spiderlike lines. It is still smooth to insert. However, the cracks are enough to allow some of the steel to be exposed to fluid and light. The result is that the toy has discollored some, showing some evidence of rust. Always clean and dry soon after use. I don't know if the other colored coats would be sturdier than the clear clear coat. Since I haven't dropped it, I suspect that the cracks are from the impact of the interior balls, but who knows?
I recommend this toy. It is clear that it is made by skilled hands. The packaging was plain, though it makes noise since you cannot stop the interior balls from rolling around.
A less expensive option uses only one ball.
Enjoy!