Milovana.com

viewforum.php?f=25


Please help me figure out this section first. Thank you in advance.
I have ET-312 and 15 electrodes.
I only work on embedded ET programs.
Teach me what I need for this section. As I understand it, these are video files with audio superimposed. How do I pass them through ET?

Заранее простите, если не то написал. Уезжаю на 3-4 дня. Приеду, почитаю. Буду рад, если поможете начать разбираться ). Спасибо.

I'm sorry again. Doesn't anyone know the answer? Just explain, what else do I need besides a computer and an ET-312 to play these files? Is the 312 audio wire enough to insert into the sound card?

Sergey7070 wrote: Sat Apr 26, 2025 8:14 am I'm sorry again. Doesn't anyone know the answer? Just explain, what else do I need besides a computer and an ET-312 to play these files? Is the 312 audio wire enough to insert into the sound card?

Yes. You could ask on perplexity or similar assistant, probably will answer in Russian...
https://www.perplexity.ai/search/how-to ... oEVWFQ2w#0

Spoiler: show

To play estim audio files on the ErosTek ET-312B, follow these steps and mode recommendations:

## Playing AudioStim Files on the ET-312B

- **Connect your audio source** (e.g., computer, smartphone, MP3 player) to the ET-312B's audio input using the supplied 3.5mm stereo cable[2][3].
- **Select the appropriate audio mode** on the ET-312B:
- **Audio 2**: For standard stereo audio tracks. This mode processes the left and right channels independently, sending them to Channel A and Channel B, respectively. It works well with most stereo music and typical e-stim audio files[1][3].
- **Audio 3**: Specifically optimized for computer-generated wave files (such as those designed for e-stim) and is the recommended mode for advanced audio files, including triphase files. Audio 3 preserves phase information and is ideal for use with TriPhase adapters and setups[1][2][3].
- **Adjust the MultiAdjust (MA) control** to set the input sensitivity. Set the MA knob to around 12 o’clock as a starting point, and ensure the output volume of your audio player is set to maximum for best results[1]. Fine-tune as needed so the ET-312B's LEDs flicker from dim to bright with the audio signal[3].
- **Set output levels** (Level A and Level B) to your comfort, starting low and increasing gradually[3].

## Playing Triphase Files

- **Choose Audio 3 mode**. This mode is specifically designed to preserve the phase information required for triphase stimulation and works best with a TriPhase adapter cable[2][3].
- **Connect your electrodes using a TriPhase adapter** as per the manufacturer's recommendations. This typically involves a special wiring arrangement that combines both output channels to create unique sensations[3].
- **Do not use Audio 3 mode above the waist** when using a common connection (TriPhase), as this can be unsafe[3].
- **Play your triphase audio file** from your audio source. Adjust the MA and output levels as described above.

## Summary Table

| Audio File Type | Recommended Mode | Special Notes |
|-----------------------|------------------|------------------------------------|
| Standard stereo audio | Audio 2 | Left/Right to Channel A/B |
| Computer-generated/Triphase | Audio 3 | Use with TriPhase adapter; preserves phase info |

## Additional Tips

- You can use **Split mode** to combine an audio mode (like Audio 3) on one channel with a built-in ET-312B routine on the other for unique effects[1].
- Always start with low intensity and increase gradually to ensure safety and comfort.
- For triphase setups, always follow safety guidelines and avoid above-waist placements[3].

**In summary:**
Use **Audio 2** for general stereo estim files and **Audio 3** for triphase files or when phase preservation is needed. For triphase, use the TriPhase adapter and always select Audio 3 mode[1][2][3].

Citations:
[1] https://blog.erostek.com/category/audiostim-files/
[2] https://img1.liveinternet.ru/images/att ... _et312.pdf
[3] https://media.erostek.com/erostek-manua ... er_1.7.pdf
[4] https://blog.erostek.com/getting-starte ... ful-et312/
[5] https://www.reddit.com/r/estim/comments ... _on_et312/
[6] https://soundcloud.com/user-709003087
[7] https://discuss.eroscripts.com/t/does-a ... oard/63369
[8] https://media.erostek.com/eroslink/eros ... rGuide.htm
[9] https://www.e-stimsystems.com/index.php ... 1&page=all
[10] https://www.reddit.com/r/estim/comments ... line_play/
[11] https://github.com/WendyTeslaburger/WT-312
[12] https://www.reddit.com/r/estim/comments ... und_files/
[13] https://discuss.eroscripts.com/t/best-s ... vice/25519
[14] https://www.e-stim.net/viewtopic.php?t=12432
[15] https://erostek.com/products/mk-312bt-power-unit
[16] https://www.youtube.com/watch?v=t19NbVMzaTI
[17] https://discuss.eroscripts.com/t/anyone ... ipts/48910
[18] https://www.reddit.com/r/estim/comments ... _triphase/
[19] https://discuss.eroscripts.com/t/restim ... ion/113640
[20] https://buttplug-spec.docs.buttplug.io/ ... ek-et312b/
[21] https://www.reddit.com/r/estim/comments ... filesetup/
[22] https://discuss.eroscripts.com/t/eroste ... box/118772
[23] https://www.manualslib.com/manual/12376 ... ml?page=12
[24] https://soundcloud.com/erostek
[25] https://loadpeople.mystrikingly.com/blog/et-312-estim
[26] https://www.manualslib.com/manual/12376 ... ml?page=19
[27] https://www.e-stimsystems.com/index.php ... 0&page=all
[28] https://erostek.eu/Erostek_ET_312.html
[29] https://www.manualslib.com/manual/12376 ... Et312.html
[30] https://blog.erostek.com/2009/11/15/et2 ... 12b-specs/
[31] https://www.manualslib.com/manual/33248 ... 312bt.html
[32] https://www.youtube.com/watch?v=iOpSsR0nvks

---
Answer from Perplexity: pplx.ai/share

Good afternoon. I will try to state my questions once again. Maybe there is a kind person who will tell you. Or maybe there is an instruction on how to use everything that is on your site. Basically, I have two main questions. When I download videos for e-steam, there are 2 files there. One is video, and the second is audio. How can I play them at the same time? Or are there special players that put sound on the steam box and video on the screen? Or do I need to have 2 independent devices? That's the main thing I'm interested in. And once again, maybe there is an instruction with a video and a photo for the forum? Thanks