Milovana.com

Merry holidays everyone!

I was generating some custom signals to give me a particular desired effect in audacity, and as I was testing, I had the idea of turning it into a continuation of "The Laboratory - Part I", by fallen_angel_42.

It follows the original premise, with estim and TTS voiceover audio files. I've provided them separately (mp3s) and combined (AC3) for quad/surround audio playback. The estim file is intended for dual-channel, I have no idea how this would work in triphase if at all. I've personally tested the entire file with base/head or balls/head on one channel, and a couple of different bipolar plugs on the other. There is some mild to moderate pain in levels 3 & 4, but no sudden unexpected volume jumps. The "experimenter voice" does a decent job of telling you what to expect when things get more intense.

I didn't expect to release this, but I went back to it today after about a year and really enjoyed the session, so I figured maybe someone else would enjoy it too! I'd love to give back to a community that has given me so much.


And so, the story continues...

The laboratory staff were pleased with your test results, and have invited you to participate in a longer session. The wording of the letter they sent you was vague, but it sounds like they want to test your endurance this time around. The only way to find out more about this experiment is to agree to become a participant.

https://mega.nz/folder/EqFR0ByZ#R2995gqqZEJ-2sqNu-Y76g

This looks good! I'll give it a try as soon as possible!

This was an enjoyable long run and it worked well together with a video with roughly the same length that I liked that doesn't have an estim track. I didn't quite make it to the final section of the 4th segment, but I might next time.

Hello,
can you please tell us, how you connected the electrodes?
Left = head / base
Right = bipolar plug
Thanks in advance!

I nearly made it to the end if the 3rd section, but I had previously completed the Estim Laboratory webtease, so quite a good innings. The pressure in my loins was almost unbearable towards the end. I used the 2B for both sessions, configuration as per the webtease (sorry I can't remember which way round it was). I generally use an ET312, but found the 2B worked really well with this. One section, where the voice over apologised for a possibly painful stim signal actually dropped out more or less, which was unfortunate because I do like to be made to squirm a little.
I was actually on the point of cumming several times, but the occasional breaks stopped me going over the top. Very frustrating and satisfying at the same time.
FYI, I used a penis stretcher with conductive rubber round my cock head and a loop below my balls on one channel, and a butt plug on the other. The stretcher gives a feeling of being erect even when going a little soft (which didn't happen often). Thanks for producing the file, it is great to try some new estim files etc.

oh boy I've been waiting for this for a long time. Thanks so much.

Hello,

Electro wrote: Tue Dec 31, 2024 2:08 am with a video with roughly the same length

Which one have you used?

Bumbum wrote: Tue Dec 31, 2024 3:26 pmWhich one have you used?

Feel the vibe 2 that just came out is about 5 mins longer than this stim file but there's a few mins of credits at the end of that one, if you have the audio on for Laboratory(I used the surround file) all going at the same time I was able to move the stimfile back about 3 mins to line things up reasonably.

stangeorge2020 wrote: Mon Dec 30, 2024 5:00 am Merry holidays everyone!

I was generating some custom signals to give me a particular desired effect in audacity, and as I was testing, I had the idea of turning it into a continuation of "The Laboratory - Part I", by fallen_angel_42.

Hi, I was looking for "The Laboratory - Part I", by fallen_angel_42 but could not find it in the webtease section. Is there another place or a different site for it?

Also, I gather this is sound only. I downloaded it but haven't had a chance to play it yet. I use a stereostim box I built. And as such I don't hear the audio as I I play it on my computer it goes right into my device so I'm not sure how I would hear the voiceover. How does one hear the voiceover and get the estim signal?

Thanks for all your work on this.

Electro wrote: Tue Dec 31, 2024 10:14 pm Feel the vibe 2

I have tried this and it really was a very nice combo!

Wow, I didn't expect this many responses! Glad to hear I am not the only one enjoying this! A few replies here:

Royboy551 wrote: Tue Dec 31, 2024 1:34 pm I generally use an ET312, but found the 2B worked really well with this. One section, where the voice over apologised for a possibly painful stim signal actually dropped out more or less, which was unfortunate because I do like to be made to squirm a little...

Really neat to hear the 2B sort-of works with this one! I don't have one to try myself, but from what I've read about its audio processing the dropout makes sense. If you can get your hands on a DIY build, the squirm is very real in that moment!

Electro wrote: Tue Dec 31, 2024 10:14 pm Feel the vibe 2 that just came out is about 5 mins longer than this stim file but there's a few mins of credits at the end of that one, if you have the audio on for Laboratory(I used the surround file) all going at the same time I was able to move the stimfile back about 3 mins to line things up reasonably.

I am going to have to give this a go myself! Thanks for sharing!

picofarad wrote: Wed Jan 01, 2025 10:09 pm Hi, I was looking for "The Laboratory - Part I", by fallen_angel_42 but could not find it in the webtease section. Is there another place or a different site for it?

Also, I gather this is sound only. I downloaded it but haven't had a chance to play it yet. I use a stereostim box I built. And as such I don't hear the audio as I I play it on my computer it goes right into my device so I'm not sure how I would hear the voiceover. How does one hear the voiceover and get the estim signal?

Holy crap this took me a minute to track down... So this one came from stimaddict's gdrive archive linked on r/estim 5 years back. Links still seem to be up, so I'll paste one in here. There's a lot to look through if you haven't run into this archive before, but under the "Fallen Angel" folder are the original two audio files. https://drive.google.com/drive/folders/ ... YrBI-pT4Oq

With how I've shared the files there is two ways to play. Either you have two audio devices, one to playback the estim file and one to play the voiceover file (this could be two audio devices on your pc with two different media players, or two different devices eg. a PC and an mp3 player) OR, you have a PC with a surround-sound capable sound card configured for quadraphonic output. If you have this setup, you plug in headphones/speakers to main out and estim box to surround LR out. I am a huge advocate for surround out, because it makes for less fiddling on setup. It involves extra work to convert video/estim tracks to surround compatible files, but then it's just plug in and play, and perfect sync every time. On that note I'd like to give a huge thanks to 47dahc for the tutorial, linking here in case you want more info! viewtopic.php?p=294844#p294844

stangeorge2020 wrote: Sun Jan 05, 2025 1:53 am Wow, I didn't expect this many responses! Glad to hear I am not the only one enjoying this! A few replies here:

I've made an AI enhanced femdom tease video to go with this e-stim file you shared. I've sent you a PM but it seems to stay in my outbox - have you blocked receiving PMs? Let's see how to make the release of this video to the rest of the audience. My message contains the details what kind of changes I made regarding the enhanced AI audio commenting and the e-stim file.

Anyway, using my video you can play it by using for example CHPlayer that takes in both the video and e-stim track directing the audio tracks to different output devices (assuming that there's more than one available).

Wexxxu wrote: Tue Jan 14, 2025 6:05 pm I've made an AI enhanced femdom tease video to go with this e-stim file you shared. I've sent you a PM but it seems to stay in my outbox - have you blocked receiving PMs? Let's see how to make the release of this video to the rest of the audience. My message contains the details what kind of changes I made regarding the enhanced AI audio commenting and the e-stim file.

Message stays in outbox until user it is sent to logs in.

edger477 wrote: Tue Jan 14, 2025 6:09 pm Message stays in outbox until user it is sent to logs in.

Thanks for the info. I just knew that it's possible also to block receiving PMs so that was my first assumption. I know of your contribution in these forums so I can give you a private preview link before a public release. I've given this already to Rillo.

This was really fun, thank you!