Milovana.com

Hello Friends,

Have you had a shitty week? Is it Friday night and you have nobody to snuggle up with? Is access to Pornhub now blocked in your state? Do you want to escape from all your troubles for a few hours? You need a Cock Hero Tranquilizer! Grab a fresh bottle of poppers, hook up your estim device (if you're into that), and escape for the next three hours into a world of unimaginable pleasure and beauty.

Fakeblah333 has a gift for infusing some of the sexiest porn clips with the most catchy tunes. You will fall in love with his artistry! I've discovered that poppers combined with estim is one of the greatest pleasures of life. Coupling his scintillating videos with poppers and estim is a marriage made in heaven.

Over the last year, I have had the honor and privilege of getting to preview the masterworks of Fakeblah333. I am so glad he is finally sharing them with this community. I have cherry picked my favorite parts, created a beatmeter to guide stroking, added popper breaks to fuck your brain, and created funscripts to be used with an estim box with restim.exe (viewtopic.php?p=348228#p348228) and MultiFunPlayer (https://github.com/Yoooi0/MultiFunPlayer). I believe this may be the very best Cock Hero experience of all times.

If you are into estim and you don't know diglet's restim, you need to come jump into this pool, it's incredible. I'll share the specifics of my set up. You might want to play around with a few of the settings to dial everything in to your liking.

I have a DIY estim box. I prefer continuous tone over pulse, so in restim I set my 'Device selection' to "312 or 2B" rather than "Stereostim, Three phase", sorry diglet.

Under Preferences on the 'Threephase' tab this is how I set everything to talk to MultiFunPlayer. (The carrier frequency range might be something you want to experiment with to find what feels good to you).
-

In MultiFunPlayer in 'Settings' under the 'Device' tab, I created a new device to interface with restim and this is how I set everything.(On the line that says "Selected device:" click the first icon, that clones the selected device, then change all the entries to match these).
-

This is how I have the 'Network' set up in restim to talk to MultiFunPlayer.
-

This is how I have 'WebSocket' set up in MultiFunPlayer to talk to restim (near the bottom of the image).
-

That's my setup. This is how I got everything working on my machine. Yours may be slightly different. MultiFunPlayer should automatically load the various funscripts for you when you load the movie into MPV.

I am releasing CH-Tranquilizer-PVM. The video is identical to CH-Tranquilizer except it does not have a beatmeter or beat sounds. I think this will be more immersive for those playing this with estim and poppers.

I am also releasing CH-Tranquilizer.mp3. This is an MP3 of the estim audio burned straight out of restim.exe. For those who can't or don't want to use restim.exe to convert the funscripts this MP3 has everything that you get from restim.exe including all the frequency and volume changes.

I tried this in several triphase configurations and all worked fantastic. I used electrodes at the head, balls, and ass. I moved the common around to each of them. Every combination felt fantastic. You get a slightly more focused sensation where ever you connect the common. It all comes down to your mood as to where you connect the common.

Here is a MEGA link to download the video and all the necessary funscripts.
https://mega.nz/folder/Hc9BxDAS#KLdamxYhgnRsPly_9u5Lsg

Here is a torrent to download the video and all necessary funscripts. -
Torrent link to CH-Tranquilizer-PVM.mp4 -
Torrent link to CH-Tranquilizer.mp3 (the MP3 of the ESTIM track) -
MEGA link to a folder which contains CH-Tranquilizer-PVM and CH-Tranquilizer.mp3 (the MP3 of the ESTIM track)
https://mega.nz/folder/CAdnVT6D#Z64H0MtMwXG6sovyylxddg
-

I hope all my instructions are helpful. If you have problems I probably won't be able to help, I just barely understand how to get these different pieces of software to work.

I hope you enjoy! All feedback is welcome.

-digitalparkinglot

Ayy! So happy people get to play this now! The beat meter, quality pass, and additions you made really make for a great experience! Thank you for the encouragement and time once again I'm sure people are going to love this.

This sounds great....any chance we could get a aeparate estim file of a fun scrip conversion? I've been curious about Re Stim but I just don't have the free alone time to engage with it.

happy new year to you DPL!!!

This is the exact type of set up i've been looking for. Been a huge fan of Restim and adding Freq/Volume to the script play back is awesome. Just need to find time to play it all now, have it set up and working fine.

One question, what trode placement have you been running. Common Head - L under balls and R -Ass ?

Il give some feedback once ive played, but i have the feeling its going to be one hella of a ride.

Thanks
Thebears

There are a few things that will help people get started. I'm finally setting this up now for the first time and there was only the T-Code option in the selected device dropdown.
Adding Restim to MultiFunPlayer is here: https://github.com/diglet48/restim/wiki/mfp-setup
The general instructions are here: https://github.com/diglet48/restim/wiki

Basically follow the clone option, name the output and enter the values in to match what digitalparkinglot has in his screenshot for that screen.

After I did this and couldn't figure out how to connect, I realized I had 123456 as the port number, there is no 5. Be sure it's ws://localhost:12346/ so it can connect successfully or it will kick out your entry.

You will also need to install the MPV video player if it isn't already installed and select the path in MultiFunPlayer.
https://github.com/diglet48/restim/wiki ... eo-players

At least that got me going. I'm trying to figure out how to change the audio delay because I need to set it to -250ms because for some reason my laptop's speaker audio and video are in sync but the audio jack sound is always -250ms off, which is usually easy to correct in Scriptplayer. ..thanks Realtek(audio chipset in my laptop)

Thank you digitalparkinglot! 3 hours! OMG

Electro wrote: Fri Jan 05, 2024 12:42 am
At least that got me going. I'm trying to figure out how to change the audio delay because I need to set it to -250ms because for some reason my laptop's speaker audio and video are in sync but the audio jack sound is always -250ms off, which is usually easy to correct in Scriptplayer. ..thanks Realtek(audio chipset in my laptop)

Electro, you can set the delay in MultiFunPlayer.

-dpl

thebears73 wrote: Fri Jan 05, 2024 12:37 am

One question, what trode placement have you been running. Common Head - L under balls and R -Ass ?

I recommend your favorite triphase configuration.

My two favorites are:
Common Head - L under balls and R -Ass
Common Head - L base of shaft and R -under balls

-dpl

samsonjude1776 wrote: Fri Jan 05, 2024 12:32 am This sounds great....any chance we could get a aeparate estim file of a fun scrip conversion? I've been curious about Re Stim but I just don't have the free alone time to engage with it.

I included the original funscript in the download. You can convert it to an audio file at https://edger477.github.io/funstim/funstim.html

-dpl

This sounds awesome! Thank you DPL and Fakeblah333!

I'm enticed, however I must agree, it seems a little much to setup. Especially because I would need to work with 2 programs I havn't used until now (they seem complicated from the screenshots) and if I would have to do it each time I want to play the CH.

Is there any way we could get the output of restim to be compiled into an mp3 file? There should be, right? I like to use my favourite player (VLSync) to play CHs.

Just the defaults from DPL, they usually work very well. I guess converting the original funscript file would lose the freq/volume changes, so that isn't comparable.

satn00b wrote: Fri Jan 05, 2024 11:00 am This sounds awesome! Thank you DPL and Fakeblah333!

I'm enticed, however I must agree, it seems a little much to setup. Especially because I would need to work with 2 programs I havn't used until now (they seem complicated from the screenshots) and if I would have to do it each time I want to play the CH.

Is there any way we could get the output of restim to be compiled into an mp3 file? There should be, right? I like to use my favourite player (VLSync) to play CHs.

Just the defaults from DPL, they usually work very well. I guess converting the original funscript file would lose the freq/volume changes, so that isn't comparable.

There isn't a way right now, I asked diglet about this. He is producing the audio on the fly based on TCode received from MFP (not on funscript that MFP reads), and whole reason why he used MFP is to reuse something that is already implemented. You could play it and record the estim output, but I'd advise you to set this up, it is not hard, and since DPL started using all 3 funscripts (volume, frequency and alpha/beta), I think this covered everything I wanted to implement for estim generator... Ok, maybe some things are still not possible but soon we might have impulse boxes that restim will support (maybe there will be additional funscript file for something) and audio files will be thing of the past.

I used MFP with Media Player Classic and HereSphere (they practically work with same settings that you'd use them with ScriptPlayer), if you need any help, you can ping me on discord.

satn00b wrote: Fri Jan 05, 2024 11:00 am This sounds awesome! Thank you DPL and Fakeblah333!

I'm enticed, however I must agree, it seems a little much to setup. Especially because I would need to work with 2 programs I havn't used until now (they seem complicated from the screenshots) and if I would have to do it each time I want to play the CH.

Is there any way we could get the output of restim to be compiled into an mp3 file? There should be, right? I like to use my favourite player (VLSync) to play CHs.

Just the defaults from DPL, they usually work very well. I guess converting the original funscript file would lose the freq/volume changes, so that isn't comparable.

Once you set it up its amazing and pretty easy to use and customise on the fly unlike an mp3 file. Take some time, follow the guides and its easy to do. You will be amazed at the difference and will never look back at traditional estim files in the same way again.

satn00b wrote: Fri Jan 05, 2024 11:00 am This sounds awesome! Thank you DPL and Fakeblah333!

I'm enticed, however I must agree, it seems a little much to setup. Especially because I would need to work with 2 programs I havn't used until now (they seem complicated from the screenshots) and if I would have to do it each time I want to play the CH.

Is there any way we could get the output of restim to be compiled into an mp3 file? There should be, right? I like to use my favourite player (VLSync) to play CHs.

Just the defaults from DPL, they usually work very well. I guess converting the original funscript file would lose the freq/volume changes, so that isn't comparable.

You don't need to do it each time you want to play the CH, just the initial setup and after that all you need to do each time is load Restim and MultiFunPlayer, click connect which starts the video player and then drag the video file you want to play into a box to start the video.

I've seen folks discuss running estim audio files(I think) on Restim. Can someone explain how this works? I just got my feet wet with getting MVP, MFP, and Restim running converted funscript but dont understand how to play audio files.

samsonjude1776 wrote: Sat Jan 06, 2024 3:08 am I've seen folks discuss running estim audio files(I think) on Restim. Can someone explain how this works? I just got my feet wet with getting MVP, MFP, and Restim running converted funscript but dont understand how to play audio files.

I use ScriptPlayer to play audio files in sync with video (It can connect to video player of your choice or play the video locally).
Restim+MFP for funscripts, ScriptPlayer for audio (mp3).