Milovana.com

All Estim files is created from funscript at eroscripts.com.
https://liteshare.co/files/MFUDKIJ

Video link is taken from eroscripts.com and links is in the txt file.

All files works best with the following setup:
This is for triphase Estim. Left+ to base of penis, Left- and Right-to head of penis, Right to prostate.
Or you else like with triphase.

Downloading now. I know what I'll be doing tonight! :D

Thanks for putting these together.

Firefox is telling me this download has a virus.

Can you post the text of what exactly is telling? Because it told me that site might contain harmful programs, not that this particular download is a virus (which firefox cannot even tell, without a dedicated antivirus-scanner extension).

it actually showed up after i started the download, I got the same warning about the site, but firefox stopped the download mid steam and said it has detected a virus. but yeah your right in that its just comparing the site to known harmful sites lists. so im just downloading again

Just a tip for any ET312b users out there.
I think I'm correct in saying that your files are designed with DIY rigs in mind, am I right puste?

I had a DIY rig that played them and was fantastic but one day just completely stopped transmitting the signal.
I know the electrode wires and audio cable are fine because I still use them so I'm guessing it's an issue with the actual circuit board...

Anyway, this means I'm currently limited to the ET312 and it can be hard to get these files to work as intended on it owing to how it processes audio.
BUT if you have VLC Player, there are some settings tweaks you can make to help get them much closer to the intended feel.
Specifically, you want to enable both stereo widening and the spatialiser options. Increasing the frequency can also make a smoother but more intense sensation, but can cause some files to lose their oomph.

Finally, you want to turn the MA up - like, WAY up. Anywhere from the 3 o'clock to maximum setting - obviously start with the power knobs at 0 before you do this! This last step is important - having the MA knob set at anywhere below 12 o'clock felt like I was being randomly stabbed in the dick during the goon audio file - turning it up to 3 o'clock made it feel like a dozen tiny hands were rubbing up and down it, which I expect was the intention?

It's nowhere near as silky smooth as using a DIY rig, but if you don't have or don't feel comfortable making one, it's a close approximation.

I am sure that there is no virus in the file I have uploaded. And yes I also see the alarm from this site.
And I have not seen this site before comming up with this. But I will supply a MD5 check for the zip file.
Just to clerify that it has not been tampered with virus.

MD5: 1a2d78a912f551968330fdbf131d583b

And yes the files I made is for DIY rigs

I don't think anyone should be concerned about a "virus" as archive only contains mp3 and txt files (no executables).

Ran through Virustotal.
Website is flagged as malicious. But can be used to download without activating any java scripts.

the zip itself was clean
https://www.virustotal.com/gui/file/e0d ... b1f7ae27ca

BobbyS wrote: Mon Sep 12, 2022 1:44 pm Just a tip for any ET312b users out there... enable both stereo widening and the spatialiser options

I used only an ET-312B for over a decade and never tried that! Or heard anyone suggest it. Intriguing idea. Do you do that a lot, or only on these funscript conversions?

BobbyS wrote: Mon Sep 12, 2022 1:44 pm turn the MA up - like, WAY up...

The MA level entirely depends on your input volume. If your mp3 device is loud, MA needs to be low. If soft, the MA needs to be high. I might have written that backwards too, but... one or the other! Essentially, the MA in those Audio modes controls the sensitivity, how loud/soft the input has to be for the ET-312B to output a signal.

puste wrote: Sun Sep 11, 2022 3:00 pm All Estim files is created from funscript at eroscripts.com...

Thanks, puste! I am excited to try these.

My download was clean, no warnings, and it unzipped fine.

zebbg69 wrote: Tue Sep 13, 2022 1:49 am I used only an ET-312B for over a decade and never tried that! Or heard anyone suggest it. Intriguing idea. Do you do that a lot, or only on these funscript conversions?

The funscript ones most consistently need it, but some other triphase files completely open up when using it. Some of V91's files are just constant stimulation on an ET312, for example, but add these settings in and it completely changes the feel.

zebbg69 wrote: Tue Sep 13, 2022 1:49 am The MA level entirely depends on your input volume. If your mp3 device is loud, MA needs to be low. If soft, the MA needs to be high. I might have written that backwards too, but... one or the other! Essentially, the MA in those Audio modes controls the sensitivity, how loud/soft the input has to be for the ET-312B to output a signal.

No, these settings specifically affect how you need to set your MA knob. I use a PC so most of the time the MA knob needs to be low (9 o'clock) to pick up as much variation in a file as possible. But if I use these settings, it'll affect the output, that position will miss a lot of effects and the knob will need to be cranked way up to feel them again.
If you're using something low powered like an MP3 player, it's all irrelevant as you won't have access to these settings anyway.

so many files
just need the time to try them out

thank you puste. I'll also add them to the estim index. btw if anyone is interested the folder is ~15 GB with all videos downloaded.

BobbyS wrote: Mon Sep 12, 2022 1:44 pm Just a tip for any ET312b users out there.
I think I'm correct in saying that your files are designed with DIY rigs in mind, am I right puste?

I had a DIY rig that played them and was fantastic but one day just completely stopped transmitting the signal.
I know the electrode wires and audio cable are fine because I still use them so I'm guessing it's an issue with the actual circuit board...

Anyway, this means I'm currently limited to the ET312 and it can be hard to get these files to work as intended on it owing to how it processes audio.
BUT if you have VLC Player, there are some settings tweaks you can make to help get them much closer to the intended feel.
Specifically, you want to enable both stereo widening and the spatialiser options.

I use a 312B and CH V3 to play files and noticed that estim funscript conversion can be hard to fine tune to pleasureable feelings. I have VLC but never use it. So I enable the stereo widening and spatialiser option and just leave the default settings on both? Sorry I have no idea what Im doing in VLC.

I notice with some tri phase files I often have to really fine tune the MA knob to for lack of better word "catch" the stroking sensation..other wise its often just a continuous signal and sometime the stroking effect seems to fade and kick back in. Is what you are suggesting solve that issue? Is what im saying make sense? Thanks!

Can someone post the contents of the zip, as in the names of the files?

Thanks so much.