Milovana.com

Hi all, this is my first tease. https://milovana.com/webteases/showtease.php?id=47098

the project is based on an old experiment named "Milgram experiment". https://en.wikipedia.org/wiki/Milgram_experiment

a subject will receive fictive electroshock. if he responds poorly ... but a dissipated person have plugged the chair in !!!.

How the game works. You have to find the right proportion of right and wrong answers, do not hesitate to use MERCY if the power goes up too much (it's part of the game that you cannot support 100%)
You have 9 possible questions per sequence, but 2 or 3 each time are sure you can't answer !!!
but too many MERCYs, and you lose the game.
The increase of the power during the test is part of the principle of Milgram

Thanks to all beta tester.


Correction done: V1.02 2021/01/23
- surrender go to finish now (and add 5 mercy)
- sound not play in question sometimes
- correction of bad English word
- correction if no answer to question = go to bad answer now
- add calibrate 100%

Correction done: V1.05 2021/01/25
- count of pain/question/pleasure corrected
--> (1 audio file is always with no sound ... not found yet because it's random)
--> (1 pain file have a lower feeling level as required ... not found yet because it's random)
--> will write a test part for select individually each sound file

Correction done: V1.06 2021/01/27
- MERCY count corrected in bad answer (will not count if under 40s)
- add random time 0-20s to picture sequence (25s) for pain or pleasure = 25s to 45s

Correction done: V1.08 2021/01/29
- Wrong sound files removed
- All starting power set to 20%

Correction done: V1.09 2021/01/31
- Custom setup done, and saved for increment you can use number with decimal

Correction done: V1.10 2021/02/01
- many language correction and process ... many thanks to Electro for his good correction work
- correction of custom. (error was: value entered (ex:11) , and increment (ex:2) have not given 13 but 112) : solution = forced variable to be converted to integer or float

==> You can HELP ME <==
* I would like to increase the number of question sequences . i need 9 pictures , and 9 questions for it.

Spoiler: show

//*** Have change the answer for no spoil the question
switch(questionNumber){
case 1:
questionAsk ="How many clothespins did you see ? (number)"
questionAnswer= 999;break;
case 2:
questionAsk ="How many Estim device BOX did you see ? (number)"
questionAnswer= 3333;break;
case 3:
questionAsk ="What is the color of the cable in the 3D picture ? (color)"
questionAnswer= 'greeeeeennnn' ;break;
case 4:
questionAsk ="Did you see a cage ? (yes/no)"
questionAnswer= no' ;break;
case 5:
questionAsk ="Did you see a GAG in the 3D picture ? (yes/no)"
questionAnswer= 'no' ;break;
case 6:
questionAsk ="How many pads did you see on picture with violet wand ? (number)"
questionAnswer= 10 ;break;
case 7:
questionAsk ="How many clothespins did you see in the 3D picture ? (number)"
questionAnswer= 55 ;break;
case 8:
questionAsk ="How many fingers did you see on speculum ? (number)"
questionAnswer= 55 ;break;
case 9:
questionAsk ="… No question … is bad for you, you loose"
questionAnswer= "nochance" ;break;
}

* Need a group of pictures (10 to 50) for sequence of pleasure , pain
* Your fine tuning of custom setup . so i add more choice as easy,medium,hard

--> depending how many i receive , i do a V2 with this files (the algorithm is the same)
.
.
.
About translate to french or German ... it take too many time for low people how want it. Prefer take this time for begin a new tease.

electro wrote (thebears73 ; submalewillbow123)

Can you (or other person) send sevenofnine compatible sound files for 2B?. sevenofnine needs around 20 for pleasure (length minimum 45s), 20 for pain(length minimum 45s) , and 20 for questions(length minimum 90s)
---
I helped make this tease compatible to the DIY/BTstim by providing help with files that didn't work with DIY devices and provided advice on where to find files that work for the DIY devices. Now the tease works great for both of those.

In other words, sevenofnine is probably able to put in a second file set for the 2B that you could select, but he doesn't have a 2B to use to find out what files work well.

==> yes can make a version for DIY and 2B if you send me the files. and will use it for a new tease for be compatible


My configuration on 2 MK312
cock=A75 ball=B80 Common=Plug (triphase)
nipple=A65 big electrode inside between thigh = B80 (dual channel)
have cum with secretary, (before the girl in chair.)

** will build a DIY or strereostim device for develop good sound files **

I'd be happy to help beta test for you.

I would love to test this, I really like the concept/idea

I'd be happy to help you with betatesting too. I have an ET312

I'd be happy to betatest. My device is 2B.

I'd love to beta test this for you. I have a DIY MidiStim device.

-digitalparkinglot

Sounds interesting, always happy to test something new and give some feedback.
DIY Unit ready.

love to become betatester

I too would like to be part of the beta!

Also like bee betatester. Have DIY stereostim.

sign me up!

would love to beta test, diy estim.

+1 for a beta test if possible please.

Thank for Update the Calibrate sound... So now i can test without to be scare.
If you look for person to translate in GER i can help.

I'm also willing to beta test to help with English, feedback about sound levels, storyline, or anything else you would like help with.
I'm using a DIY audiostim type device.

Edit: I noticed you said you did this. It seems the common knowledge is to connect two electrodes on the same independent (and isolated) channel for each nipple. Meaning 4 total electrodes if you want to stim two nipples. Also curious where you prefer to stim between thighs for this?

nipple=A65 big electrode inside between thigh = B80 (dual channel)