Milovana.com

Posted: **Tue Sep 27, 2022 1:16 pm**

Any one have stl files for a 3d printable case for this project?

Posted: **Wed Sep 28, 2022 1:15 am**

MilovanaFan wrote: ↑Tue Sep 27, 2022 1:16 pm Any one have stl files for a 3d printable case for this project?

I hear some people saying their resistors don't get that hot, but I've seen mine at 160f(70c) from time to time and usually see things at least warm to hot feeling even when it isn't a very long session or with high intensity as the intention, and that's with the resistors mounted to an aluminum plate and measuring the aluminum plate temperature. If you printed this with PLA or PETG and didn't have something metal to mount the resistors to with a fan to keep the plastic cool, I'm not sure you'd want to mount these in a plastic case.

Posted: **Wed Sep 28, 2022 5:24 pm**

I want to print this as a case for this project. Does anyone know if the hole spacings are equal across these pcbs?

https://www.thingiverse.com/thing:4254574

Posted: **Fri Sep 30, 2022 12:52 pm**

MilovanaFan wrote: ↑Tue Sep 27, 2022 1:16 pm Any one have stl files for a 3d printable case for this project?

If you are going to use a plastic case, you might consider mounting the resistors on an aluminum plate to spread out the heat.

Posted: **Tue Nov 01, 2022 5:42 pm**

Hello,

Thank you for this tutorial and everyone for your contribution. I am tempted to try building my first device. I live in Europe so I don't have access to all the material you listed. I did a mixed between the material that you suggest and the material that lolol2 suggests in his tutorial.

Spoiler: show: lolol2's tutorial

Could someone confirm that the list i've made would work:
1. Amplifier XH-M189 TPA3116D2 (from your tuto) https://www.amazon.fr/Reland-Sun-amplif ... 168&sr=8-3
2. 100V transformer (from lolol2's tuto) https://www.conrad.de/de/p/elma-tt-iz18 ... 16104.html
3. 3.9 Ohm 50W resistors (from lolol's tuto) https://www.conrad.de/de/p/elma-tt-iz18 ... 16104.html
+ 22 Ohm 50W resistors (from lolol's tuto) https://www.conrad.de/de/p/widap-160082 ... 25118.html
4. Power switch (from lolol2's tuto) https://www.amazon.fr/Adaptateur-dalime ... Q==&sr=8-4
5. Banana 4mm pins (from lolol2's tuto) https://www.amazon.de/gp/product/B07X34SNGP/

Thanks for your help

Posted: **Thu Nov 03, 2022 4:51 pm**

This should work fine.
The only problem is that you only have one volume knob for both channels.

Maybe I would just order two of the AMPs (if +10€ is no big deal) and use one for right and one for left channel, then you have an individual volume control for each channel. Using an 3.5mm y-splitter as input for both AMPs.

Posted: **Sat Nov 05, 2022 12:51 pm**

Fabulous ! Thank you for your help!!

Posted: **Sat Nov 05, 2022 5:14 pm**

lolol2 wrote: ↑Thu Nov 03, 2022 4:51 pm This should work fine.
The only problem is that you only have one volume knob for both channels.

Maybe I would just order two of the AMPs (if +10€ is no big deal) and use one for right and one for left channel, then you have an individual volume control for each channel. Using an 3.5mm y-splitter as input for both AMPs.

I have many amps and this is now my favorite: https://www.amazon.de/-/en/gp/product/B087FWWVB6/

It has separate knob for each of 4 channels, and is Bluetooth (no cables, no hum). When used in Bluetooth dual-channel mode, then you have RCA output (so you can connect another amp or 2B). I use it for 2B (don't have to stim with amp, leave all knobs at 0) because for some teases that are really quiet (i.e. Estim Bondage) any noise/hum from sound card can be an issue, and with Bluetooth transmission this does not get through.

Posted: **Wed Nov 09, 2022 3:47 am**

Posted: **Sun Nov 20, 2022 5:46 am**

AmpanMan123 wrote: ↑Sun Sep 11, 2022 5:03 pm I live in Canada, and trying to find a suitable amp. I can figure for everything else but if anyone knows an alternative that's in-stock, please link it .

I have a budget of 70$, so if there's a prebuilt e-stim box that anyone here knows and likes please leave your recommendations!

I feel bad for posting this on here but thank you so much to anyone that can help.

Hey sorry this is late, but maybe it'll help others:

Also in Canada. I used a SMSL SA-36A, as AFAIK it was recommended by TroniC on Smartstim for the "original" MidiStim. I paid $69.99 CAD, so that fits your budget... but seems Amazon has it for $105 now

So far it's been worth it - I've since tried some other "module" amp boards, including a chinese TPA3116D2-based one from "Doudou". This one had bad spikes when you got close to the "off" position of the pot (I think solvable by replacing the switched pot with a dedicated switch and separate pot) but this meant a much more limited range of usable master volume control.

The SMSL's master volume pot is great, very smooth. I bypassed the amp switch on it so it's just on as long as I have the DC plug in. I still have individual channel pots (and even 4x individual trode bias pots) but the master one gets the most use. It's easy to spin down in an emergency or if I have to change something about the setup.

Posted: **Sat Mar 18, 2023 5:59 pm**

1. Amplifier XH-M189 TPA3116D2 (from your tuto) https://www.amazon.fr/Reland-Sun-amplif ... 168&sr=8-3
2. 100V transformer (from lolol2's tuto) https://www.conrad.de/de/p/elma-tt-iz18 ... 16104.html
3. 3.9 Ohm 50W resistors (from lolol's tuto) https://www.conrad.de/de/p/elma-tt-iz18 ... 16104.html
+ 22 Ohm 50W resistors (from lolol's tuto) https://www.conrad.de/de/p/widap-160082 ... 25118.html
4. Power switch (from lolol2's tuto) https://www.amazon.fr/Adaptateur-dalime ... Q==&sr=8-4
5. Banana 4mm pins (from lolol2's tuto) https://www.amazon.de/gp/product/B07X34SNGP/

Does anyone have an instruction manual on how to put this together, for someone that has no experience in this type of project?

Posted: **Sat Apr 15, 2023 8:24 pm**

ramen wrote: ↑Mon Jan 24, 2022 2:30 pm I finished my box, yay! I modified a bit the original build and now it feels great.
This is my final schematic, notice the extra resistors:

The default schematic worked but felt a bit painful, with a constant "static" that got unbearable at the higher levels. After adding the two parallel resistors the static is almost gone and the signal feels very smooth, strong but not painful.
Resistors are inexpensive and this modification barely adds complexity to the build. The quality increase is MASSIVE. I highly recommend this over the original schematic (unless you like pain of course).

@steelhorse545
My audio card was indeed damaged. After trying the estim box with the faulty amp, the left channel had a massive drop in volume. Super annoying and a even bit disorienting, even with the balance corrected in Windows settings. I will have it repaired asap.

I ended up using the box via USB audio interface, configured at 100% volume. Turns out my amp is a bit weaker than expected and I had to raise its volume way up before getting any feeling. Not a big deal but led me to believe that the box wasn't working at all. I believe I was feeling more "distortion" with the USB interface simply because the interface had more power than the broken audio card, but with the extra parallel resistor the noise is gone and that's solved.
Thanks again for the help.

My parts are coming today, but I didn't order an AC adapter yet.

Since this is 12v and center positive, can't I just use the power supply from my 2B? The A channel died in less than a couple months of owning it, and there's no way I'm paying $85 to ship it back to the UK to have it fixed when, at the price I paid for it, it should have lasted forever (and been under warranty).

Not to mention what a garbage job it does at stereo stim. I went back to my homemade Davey Box.

Posted: **Sat Apr 15, 2023 9:01 pm**

Corndogville wrote: ↑Sat Apr 15, 2023 8:24 pm can't I just use the power supply from my 2B

2B PSU might be too weak for DIY box. It is 12W and these TPA3116 amps produce (and need) more power, since audio devices are order of magnitude less efficient than pulse boxes.

Also, you should look for electronics shop that can repair your 2B, it is most probably driver blown off, and repair should be half of the price to send it back.

Also, some people in Joanne's discord modded 2B with stronger drivers so they don't burn out when you use Moaner and similar large electrodes :) You can check there what they repaired and then use it to check if yours has same problem.

Posted: **Sat Apr 15, 2023 9:02 pm**

Also, is there any final verdict on the 10 ohm 10w parallel resistors? I got a pair of Dayton Audio ones, figuring they'd be high quality:

https://www.parts-express.com/Dayton-Au ... quantity=1

For the 3.9s, I got Jantzen Audio:

https://www.parts-express.com/Jantzen-3 ... quantity=1

Also, I got these power jack to screw terminals, which will hopefully be compatible with the 2B adapter:

https://www.parts-express.com/2.5-x-5.5 ... quantity=1

Posted: **Sat Apr 15, 2023 9:04 pm**

edger477 wrote: ↑Sat Apr 15, 2023 9:01 pm
Corndogville wrote: ↑Sat Apr 15, 2023 8:24 pm can't I just use the power supply from my 2B
2B PSU might be too weak for DIY box. It is 12W and these TPA3116 amps produce (and need) more power, since audio devices are order of magnitude less efficient than pulse boxes.

Also, you should look for electronics shop that can repair your 2B, it is most probably driver blown off, and repair should be half of the price to send it back.

Also, some people in Joanne's discord modded 2B with stronger drivers so they don't burn out when you use Moaner and similar large electrodes :) You can check there what they repaired and then use it to check if yours has same problem.

It's not worth it to me to try and fix the 2B (nor do I relish explaining to an electronics shop what it does, but maybe it's different in Germany!), but what AC adapter do I need then in volts and amps? A link would be awesome, since it's not something I want to get wrong. What about the whole "class 2" thing, also? I think I've heard folks saying it had to be class 2, in regards to safety. I assumed the 2B one would be as safe as you can get, but obviously not if it's too weak.

Milovana.com

Low-cost (~$40-60) DIY Stereo E-stim for Audio Input (based on TroniC's MidiStim)

Re: Low-cost (~$40-60) DIY Stereo E-stim for Audio Input (based on TroniC's MidiStim)

Re: Low-cost (~$40-60) DIY Stereo E-stim for Audio Input (based on TroniC's MidiStim)

Re: Low-cost (~$40-60) DIY Stereo E-stim for Audio Input (based on TroniC's MidiStim)

Re: Low-cost (~$40-60) DIY Stereo E-stim for Audio Input (based on TroniC's MidiStim)

Re: Low-cost (~$40-60) DIY Stereo E-stim for Audio Input (based on TroniC's MidiStim)

Re: Low-cost (~$40-60) DIY Stereo E-stim for Audio Input (based on TroniC's MidiStim)

Re: Low-cost (~$40-60) DIY Stereo E-stim for Audio Input (based on TroniC's MidiStim)

Re: Low-cost (~$40-60) DIY Stereo E-stim for Audio Input (based on TroniC's MidiStim)

Re: Low-cost (~$40-60) DIY Stereo E-stim for Audio Input (based on TroniC's MidiStim)

Re: Low-cost (~$40-60) DIY Stereo E-stim for Audio Input (based on TroniC's MidiStim)

Re: Low-cost (~$40-60) DIY Stereo E-stim for Audio Input (based on TroniC's MidiStim)

Re: Low-cost (~$40-60) DIY Stereo E-stim for Audio Input (based on TroniC's MidiStim)

Re: Low-cost (~$40-60) DIY Stereo E-stim for Audio Input (based on TroniC's MidiStim)

Re: Low-cost (~$40-60) DIY Stereo E-stim for Audio Input (based on TroniC's MidiStim)

Re: Low-cost (~$40-60) DIY Stereo E-stim for Audio Input (based on TroniC's MidiStim)