Page 1 of 2

[Release/Feedback] Estim Laboratory

Posted: Tue Jul 21, 2020 4:03 am
by Rillo
I am happy to release my first tease. :clap:

https://milovana.com/webteases/showtease.php?id=46658

Estim Laboratory is a story centric tease featuring many estim sessions. The entire tease has about a 30 minute run time plus 3 different story based endings. Any completed session can then be revisited from the main page.

This tease has been developed with the 2B in mind but beta testing has seen favorable results on most major units used here.

Concept:
You drop by a laboratory as a volunteer and quickly discover a few characters with conflicting motives. You are soon at the mercy of ever increasing tests and experiments as the staff members fight over you.

Themes: Story, medical, implied bondage, light submissiveness, minor denial.

Getting started:
You should have decent results running with default settings but the tease can be adjusted. It is designed to automatically ramp up the volume as you progress. This ramp rate can be altered to your liking. The wider the initial volume range, the faster the ramp over the entire tease. There are breaks between the sessions designed to increase your sensitivity. While most of the tease is pretty linear, there are 3 different endings with their own story lines.



Through testing I have learned that some of the session should probably have been a little longer. :lol:
I hope it is still enjoyable. :-)


Future plans:
  • Add alternate picture sets for each of the base sessions.
  • Add a small, optional bonus session with the main nurse.

Re: [Release/Feedback] Estim Laboratory

Posted: Tue Jul 21, 2020 2:45 pm
by topstim2000
I absolutely loved it. I found the story line engaging and fun. The signals are exciting and stimulating. I used an ET312b and set the initial levels just enough to be felt comfortably after some warmup and was able to let the tease do the rest. Everyone should give this a try, I think this set a new standard for estim teases. Great work!
Spoiler: show
The dynamics in the signals were very simulating and perfectly timed with the story too! Many files rely on triphase effects, having a constant volume and using beating interference, but I find them numbing and they don't do it for me. I need to look for more single-channel setups and get out of my triphase rut!

Separate calibration for the input and output level of the device really worked well and meant I wasn't distracted during the tease, everything was setup perfectly. I hope more estim teases adopt this approach in the future.

I loved how this ended too, are you going to want to press more buttons? No of course not, there's cum everywhere now! :lol: Just a perfect ending.

Re: [Release/Feedback] Estim Laboratory

Posted: Tue Jul 21, 2020 7:43 pm
by Electro
This is a very immersive story! Well done. Of course everything great has a tendency to feel short.
I don't recognize the feeling of any of this stim, did you create this yourself? It's aggressive but not painful, except for the part where I think it's supposed to be, but it was nothing I couldn't handle.
This works well on DIY AudioStim type devices and I think the volume range probably feels similar on my device as the 2B does. I didn't follow the electrode configuration and I know that made things a little 'more intense' on the common electrode but I expected that, but I need to fix a broken wire on a DIY bipolar trode.
Spoiler: show
I didn't have my hands ready to make a choice before the final test began. So the choice for the ending was made for me based on the bondage predicament. I'm not sure if that is intentionally what is supposed to happen. I ended up playing through the other endings after finishing. I wasn't sure if there was supposed to be a 'cum now' section or not, so I held off when I should have let it go. I'm not sure if this is supposed to end in denial, but that's how it turned out. At least in my future plays, I know when to 'let go'.
[Bugs/spelling]
I'm not sure if it's a bug or what but when I set starting volume at 70% and ending volume at 100% and tried to start the tease, it said it was at 40% during the calibration and warmup. I just ended up playing with the 40% hoping it wasn't going to suddenly jump to 70%, then I chickened out before the warmup was done and made sure the settings were actually set to the defaults before playing through. I thought this was fixed for the 70 to 100% based on what the beta thread discussed. :shrug:
Spelling: "You can see my pussy peaking out?" should be 'peeking'.

Re: [Release/Feedback] Estim Laboratory

Posted: Tue Jul 21, 2020 8:11 pm
by Rillo
Electro wrote: Tue Jul 21, 2020 7:43 pm This is a very immersive story! Well done. Of course everything great has a tendency to feel short.
I don't recognize the feeling of any of this stim, did you create this yourself? It's aggressive but not painful, except for the part where I think it's supposed to be, but it was nothing I couldn't handle.
This works well on DIY AudioStim type devices and I think the volume range probably feels similar on my device as the 2B does. I didn't follow the electrode configuration and I know that made things a little 'more intense' on the common electrode but I expected that, but I need to fix a broken wire on a DIY bipolar trode.
Thank you! :-)
For the sounds, some are borrowed and some are a mix of existing things I mashed together.
Electro wrote: Tue Jul 21, 2020 7:43 pm
Spoiler: show
I didn't have my hands ready to make a choice before the final test began. So the choice for the ending was made for me based on the bondage predicament. I'm not sure if that is intentionally what is supposed to happen. I ended up playing through the other endings after finishing. I wasn't sure if there was supposed to be a 'cum now' section or not, so I held off when I should have let it go. I'm not sure if this is supposed to end in denial, but that's how it turned out. At least in my future plays, I know when to 'let go'.
That is exactly what is supposed to happen! :-D That is also why I give the estimated time in the case you wanted to jump out and make the choice.
Electro wrote: Tue Jul 21, 2020 7:43 pm [Bugs/spelling]
I'm not sure if it's a bug or what but when I set starting volume at 70% and ending volume at 100% and tried to start the tease, it said it was at 40% during the calibration and warmup. I just ended up playing with the 40% hoping it wasn't going to suddenly jump to 70%, then I chickened out before the warmup was done and made sure the settings were actually set to the defaults before playing through. I thought this was fixed for the 70 to 100% based on what the beta thread discussed. :shrug:
Spelling: "You can see my pussy peaking out?" should be 'peeking'.
This should be fixed now (update 20.7.21). Thanks for pointing those out.

Re: [Release/Feedback] Estim Laboratory

Posted: Tue Jul 21, 2020 10:21 pm
by cfs6t08p
Great to see another quality e-stim tease, well done!

I use a stereostim device and the pain sections are unfortunately not well suited for it; the frequency is much too low.
By filtering those out I could enjoy the rest of the tease, the regular stim files are excellent and so is the writing :yes:
Spoiler: show
Cassandra ending best ending :blush:

Re: [Release/Feedback] Estim Laboratory

Posted: Wed Jul 22, 2020 3:09 am
by candii
https://www.e-stimsystems.com/index.php ... 0&page=all

is this the device for the tease? if comes with 4 electro pads but where exactly should i put them when starting the tease or should i buy something else. sorry im just abit confused with the setup never tried this before but want to buy one and any help would be appreciated :)

Re: [Release/Feedback] Estim Laboratory

Posted: Wed Jul 22, 2020 3:37 am
by Rillo
candii wrote: Wed Jul 22, 2020 3:09 am https://www.e-stimsystems.com/index.php ... 0&page=all

is this the device for the tease? if comes with 4 electro pads but where exactly should i put them when starting the tease or should i buy something else. sorry im just abit confused with the setup never tried this before but want to buy one and any help would be appreciated :)
Yes, that is the unit.
This post here details the recommended setup for this tease.
https://www.e-stim.net/viewtopic.php?t=9620

Re: [Release/Feedback] Estim Laboratory

Posted: Wed Jul 22, 2020 4:40 am
by candii
thank you!

also can you pm me how to get the 3 endings? ive played it but keep getting the same one and am confused how to get the others if theres barely any clicking involved

Re: [Release/Feedback] Estim Laboratory

Posted: Wed Jul 22, 2020 10:28 am
by phoopha
I've found that the signals stop completely after a 'certain' decision has been made and you've started being stimmed by either person.

Re: [Release/Feedback] Estim Laboratory

Posted: Wed Jul 22, 2020 11:45 am
by Rillo
phoopha wrote: Wed Jul 22, 2020 10:28 am I've found that the signals stop completely after a 'certain' decision has been made and you've started being stimmed by either person.
Are you saying you found a bug?

Re: [Release/Feedback] Estim Laboratory

Posted: Wed Jul 22, 2020 12:46 pm
by kksavas
a bit short but it was good fun :w00t:

Re: [Release/Feedback] Estim Laboratory

Posted: Wed Jul 22, 2020 2:40 pm
by Ereinon
wow, really good tease. I love E-Stim, unfortunately most works are not compatible with the E-Stim box. But your tease is convincing. Thank you very much, I want more :-)

Re: [Release/Feedback] Estim Laboratory

Posted: Wed Jul 22, 2020 4:46 pm
by ridgeracer
This tease is great!
I do have to turn down the bath tub volume on my BT Unit. That file is way to HOT and feels like my balls are cooking (not in a good way!) All the rest of stim files work really well.
It would be amazing if you could adjust that one hot file. May be to much to ask, But it would then open up the self bondage for some of us with stereo units.
Thanks

Re: [Release/Feedback] Estim Laboratory

Posted: Wed Jul 22, 2020 5:18 pm
by phoopha
Rillo wrote: Wed Jul 22, 2020 11:45 am
phoopha wrote: Wed Jul 22, 2020 10:28 am I've found that the signals stop completely after a 'certain' decision has been made and you've started being stimmed by either person.
Are you saying you found a bug?
Maybe! As I don't know how it is meant to end, I can't be sure, but I suspect it is a bug. One route led to it ending with no signal and somebody in a wedding outfit. The other option had a loop of photos, initially with a signal, but then no signal but photos still looping.

Re: [Release/Feedback] Estim Laboratory

Posted: Thu Jul 23, 2020 1:41 am
by CumScream
An amazing & well written tease.

I had to run through it twice to get a decent session length, so the different endings worked here.

- - -

@Phoopha / Rillo;
I also found the photo loop ending stopped sending signals after a short while.
But it also kept asking for a tease rating as the photo's cycled, so this was obviously the last page anyway.