Page 1 of 7

[Closed Beta Feedback Thread] - Estim Experiment Day 2

Posted: Wed Jul 08, 2020 9:13 pm
by boundupone
This thread is for the limited beta test of Estim Experiment Day 2 EOS tease

Please can you give me as much information about any bugs you find in the test so I can try and track it down more easily

I also am open to suggestions and requests to improve the tease

It may be useful if you also put which powerbox you are using, as I only have ET312b, so haven't tried anything on other boxes

Thanks everyone for your help, really appreciate it

Reported Issues Not Yet Solved




Parked - Low Priority/Cannot Replicate
- Suggestion: always display the counter (if the setting is activated) (Edge Count: 0 / Volume: 40% / Orgasms 0) like the "Edging" and "I Came" buttons.
Great idea, but not sure how to do this, I can make an announce button that when you click the mistress tells you the numbers, but I can't figure out how to have the information displayed in the announce area

When you can choose what kind of stuff you want to see at Bryce what you choose seems not to lead to the right destination (at least for some)
It all looks OK on code side, I think this must be some images are not categorised 100% correctly

-After pressing 'edge' button for first time get just stim signal and no progress. Only option to press 'I came' button, but after this the edge button does not re-appear
I know why the edge button does not re-appear with this route through the tease, but I haven't been able to replicate the issue with no progress in this section

-Audio file volumes are low in comparison to other eStim files, even when they are at 100%(allowing my 60% recalibration to climb from 60% to 100% is easily possible unless I boost externally). I had to use an external software application to boost the volume +2.6db beyond my eStim device and laptop both being set to 100%. The trouble is that means all of the audio files were lowered too far for many devices, probably everything that isn't an ET312B or 2b even though the files themselves when turned louder do work great with DIY AudioStim devices.
Based on the design of this tease, it seems that any smaller differences in audio volume will get washed out and most things seemed quite level.
Not sure if I can do anything about this without replacing most of the stim files. I plan next tease to be done differently with more consistency of files, but not sure if I can do anything for this tease

After getting to katy with the vibrator and you click i edged the same tone keeps getting played into the next mistress and sometimes there is no progress forward. Not sure if thats a browser issueI've had this happen repeatedly, but also decided to unhook and get some water and use the bathroom, I came back and it was on the next character. It seems sometimes after 3 mins or so it will eventually advance. I have this exact same problem with eStim Challenge whenever it goes back to the main character when she tells me I'm going to get a new set of images. I think it's an EOS issue. I noticed if I watch my network throughput, it sits at zero until it eventually starts loading. I tried it with a completely different computer, browser, and ISP and the issue exists there too. It also happens with my smartphone too using its own data instead of my normal ISP.
Edit: Not just with Katy, when it happens, it's always when clicking edging and waiting for Mistress Bianca.
I made a number of changes to Katy, as there were some errors in the goto commands. I also tried to tweak the edging section a bit, but I am not sure why you are getting this issue, I see no reason for it??

- First try: no sound (EOS bug?)

Solved Issues
Spoiler: show

No sound on calibration page

When testing dialog options in settings that if I choose custom for anything except the first option, it will populate NaN instead of giving an input field. I also noticed that if I choose 2, 4, 6, and 8 as options, I've managed to freeze it 3 times after clicking to advance at the "OK, let's check everything" prompt(the prompt stays there but the arrow disappears) ..but if I choose all the default options and then click change, it goes to the main menu(instead of asking questions again) and then I can click settings and select 2,4,6,8 with the rest as defaults and it works fine. I've reproduced it working twice in two separate sessions with failures before and after when I didn't choose the defaults and then redo it.

There was one of the pain files that seemed *much* louder than the others. I don't have a filename to go off of and it seems it hits on random people because I got this audio with Bryci.

There is also the two pain files from Asa and Kleio and they were both too quiet. 88.25%, get ready for pain again, 96.25%, TAKE IT SLAVE, 104.25%, HAHA. The volume doesn't get higher once it passes 100%. Hopefully that tells you which files
This sound file loops at that point and i think the starting volume is a little lower. I have tweaked things around so jump here is bigger but overall should not exceed 100%

Brooke freezes, she froze twice in the same spot(after restarting the tease with a fresh browser session and deleting cookies), so I don't think it's the usual and unfortunate common EOS freezes. She says "So let's play a little game And you must follow my instructions" [Image: Her hands on her knees] and it's frozen, I gave it a minute and then clicked Edging and nothing changed, audio didn't stop, after another minute I clicked I came to see if anything would happen and still frozen although the buttons disappeared when I clicked them.

Spelling error with Jana: "secretaries" instead of "secretarys"

-Just wondering, is this the intended order of the text? This is a copy/paste. I'd think we would recalibrate, have the instruction, and then say "OK, time to edge again slave" Spelling: recalibrate is missing an L.
"Do not cum slave
Let's take a short break
Edge Count: 1 / Volume: 62.00000000000003% / Orgasms 0
Edge Count: 1 / Volume: 0% / Orgasms 0
OK, let's recaibrate
OK, time to edge again slave
Turn the power up until it feels same as before

-When getting the "Let's turn the power up" scenario the timer runs out but the audio doesn't stop until the text actually displays "Turn the power up until..." Which it seems can be a solid 5-10 seconds after the timer completes.

-After the scene with Mistress Bianca "I want to do another slideshow edge slave", she said my last run was pathetic and I needed to do more,(first run softcore, this run was ass), this was edge 19 at the end of that run, but after that, all I got was Bryci over and over again all the way to edge 31(11 runs of Bryci in a row) when I decided to mash the "I came" button figuring I might as well test that since I wasn't testing additional characters. Bryci doesn't show any categories other than ass pictures and I had the opportunity to choose them all. This was on three separate runs involving closing the browser, wiping cookies, logging back into Milovana and rerunning, still all ass pics.
OK, a few things here, but hopefully all sorted now
The reason you just got Bryci at that point is you had already seen everyone, and she is left open with selection of multiple image categories (now should work) so she has a lot of variation in, but I now also re-enabled the second session with Mistress Bianca for additional variety at this stage


-With the above experience, I'm trying to figure out what the levels are about. I didn't see any prompts about it and apart from the 'turn the power up' increasing higher and having a longer timer, I'm not seeing a difference between levels. Is there supposed to be something more noticeable or is it mostly the 'power up' being more challenging? Perhaps I'm not passing through the levels because it seems like it's intended to be an endless tease to the point where "I came" gets clicked.
OK, the levels are about the session you get with Bianca when you press edge button, you either get a break, a different file, pain etc depending on level you are at
Also, the tease is not endless, when you get to last level of edges, it should have an ending session with Bianca


-When mistress tells you power level, sometimes you end up with a number with multiple decimal places
I hope I got them all!

"Let's recabriate" still missing the L.

I'm still not finding the end and I think I've hit all of the characters. I've been at it for nearly 3 hours and 27 edges on the current run that I'm on. I don't see the status of what level I'm on but the default level thing suggests I should be done by now. Yesterday it was over 30 edges and became 100% Bryci, this time it's Bryci and Bianca telling me I'm pathetic but she also seems to think I've had 0 pictures before edging half the time, not sure if she is remembering things properly.
Should now be sorted, I had missed something in settings - Init Script, but should now work. Please let me know if you still have issues

Kenja spelled "quickly" wrong

Bianca telling me I'm pathetic but she also seems to think I've had 0 pictures before edging half the time, not sure if she is remembering things properly.
I found some errors in the code, this should now work properly, and also there should now be some extra bits in the tease when you come to Bianca for the second time

I recognize the first file with Asa/Kleio, I never found to be all that painful of a file. - 88.25%, get ready for pain again 103.25%, TAKE IT SLAVE 115.25%, HAHA 100.25%, a little break Still seeing the over 100% stuff and the file feels even lower than anything else in the tease, so I cranked the volume further just to feel it. The second file feels more like a pain file although it's volume still is lower than the other files in the tease too even though it also went over 100%.
I have changed it so now you should not get over 100% on the volume, but let me know if for any reason it still goes over.
I have also replace both sound files, hopefully these two are better (maybe I should say worse as they are supposed to be pain files :-D )


-On one of the runs, I logged into Milovana first, started the tease and it defaulted to 40% volume when I have it configured to 60%, so I restarted the tease and checked the settings and it showed it was at 60%, I ran the tease and it was at 60%. It seems it doesn't load the saved settings until you click settings to view what they are.
Should now be solved, your settings from last time should be loaded automatically each time

I'm not sure if the volume meter is supposed to show up in all of the slideshows but it seems like it isn't always there, maybe this is by design, I don't really miss it but I figured I'd mention it. I know it wasn't there for Penny or Kaleesy but there were others but I stopped taking notes on that because I really wasn't worried about it.
I have added this in a lot more often, hopefully isn't too much!

After getting to katy with the vibrator and you click i edged the same tone keeps getting played into the next mistress and sometimes there is no progress forward. Not sure if thats a browser issue but i will test with others.

There are two people who want me to stroke while being stimmed, I'm really not all about touching the electricity intentionally with my hands and prefer the stim anyway, but I guess that might just be my opinion.
I added some text at beginning of tease to suggest wearing gloves during these parts

- The "N" in "remeber it" is missing (remenber it) (blue text, I came 5x or more).

- In the "Show volume and edge counter? settings, there is only the "Yes (default)" button, the "No" button is missing:

It seems that sometimes after an increase of power, after I pushed the button, there is an automatic translation to the next mistress after some time without having to press the ready button.

When I press edging, I only get the 'ready' button for the recalibration in the early stages where she gives a "short break". For everything beyond that once she raises the power level, it goes to the calibration audio for about 10 seconds and advances to the next mistress automatically. I thought this was how it was designed, just to make a quick edge up in volume if it's needed, which is shouldn't be needed that often after you've been playing awhile as it is.

Run 1
Brook - Hit Edging - Pictures Stopped and then nothing, sound kept playing and had to hit i came to end the file.

after the you came 1 times slave, i forgive you the "i came" button appeared but not the "edging" button. After that new mistress and no new "edging' button

Run 2
Jessa - Let it played for a few mins, great pics and loved the breath play element
Hit edgining and froze again

Repeated and still no edging button on the next mistress? Had to restart to get it back.

This is on chrome, Macbook
3rd time and exact same, first mistress (the milking session) and as soon as i pressed the "edging" after several minutes it freezes. This was ruing on the settings of easy (2/4/6/8).

Reloaded and 4th time changes the settings to default with (60% vol and cal vol) and started with Bryci,

picked the "kink" let play for about 20 images and hit edging button and froze again.

- Twice, the "Edging" button disappears, only the "I came" button remains. Clicking on "I came" while Mistress Bianca displays "Slave, I am very disappointed Lucky for you the data we have collected so far is very good" blocks the story...

When I choose 'Kink' as my poison with Bryci, I'm getting all Futa category pictures.

I enjoyed making Clarissa angry by calling her Clara and Lisa, nice touch.

"Hmm, let's see how you do with a different file" This file feels like it's playing quieter than the calibration file that comes after it.

You said you changed Brook, I don't see any images until "But I will do my job" it's probably the first two images. I like the new images you put in there though.

Re: [Closed Beta Feedback Thread] - Estim Experiment Day 2

Posted: Wed Jul 08, 2020 10:40 pm
by kksavas
want to give it a try with a 2b

Re: [Closed Beta Feedback Thread] - Estim Experiment Day 2

Posted: Wed Jul 08, 2020 10:57 pm
by boundupone
kksavas wrote: Wed Jul 08, 2020 10:40 pm want to give it a try with a 2b
pm sent

Re: [Closed Beta Feedback Thread] - Estim Experiment Day 2

Posted: Thu Jul 09, 2020 12:16 am
by thebears73
Why do i feel i always miss out on testing.....

Re: [Closed Beta Feedback Thread] - Estim Experiment Day 2

Posted: Thu Jul 09, 2020 9:37 am
by Electro
It seems there is no calibration audio in the calibration sequence, so I restarted my browser and tried multiple times, including after getting the running through the tease.

I also noticed when testing dialog options in settings that if I choose custom for anything except the first option, it will populate NaN instead of giving an input field. I also noticed that if I choose 2, 4, 6, and 8 as options, I've managed to freeze it 3 times after clicking to advance at the "OK, let's check everything" prompt(the prompt stays there but the arrow disappears) ..but if I choose all the default options and then click change, it goes to the main menu(instead of asking questions again) and then I can click settings and select 2,4,6,8 with the rest as defaults and it works fine. I've reproduced it working twice in two separate sessions with failures before and after when I didn't choose the defaults and then redo it.

Audio file volumes are low in comparison to other eStim files, even when they are at 100%(allowing my 60% recalibration to climb from 60% to 100% is easily possible unless I boost externally). I had to use an external software application to boost the volume +2.6db beyond my eStim device and laptop both being set to 100%. The trouble is that means all of the audio files were lowered too far for many devices, probably everything that isn't an ET312B or 2b even though the files themselves when turned louder do work great with DIY AudioStim devices.
Based on the design of this tease, it seems that any smaller differences in audio volume will get washed out and most things seemed quite level.
--There was one of the pain files that seemed *much* louder than the others. I don't have a filename to go off of and it seems it hits on random people because I got this audio with Bryci.
Spoiler: show
--There is also the two pain files from Asa and Kleio and they were both too quiet. 88.25%, get ready for pain again, 96.25%, TAKE IT SLAVE, 104.25%, HAHA. The volume doesn't get higher once it passes 100%. Hopefully that tells you which files.

Brooke freezes, she froze twice in the same spot(after restarting the tease with a fresh browser session and deleting cookies), so I don't think it's the usual and unfortunate common EOS freezes. She says "So let's play a little game And you must follow my instructions" [Image: Her hands on her knees] and it's frozen, I gave it a minute and then clicked Edging and nothing changed, audio didn't stop, after another minute I clicked I came to see if anything would happen and still frozen although the buttons disappeared when I clicked them.

Spelling error with Jana: "secretaries" instead of "secretarys"

Just wondering, is this the intended order of the text? This is a copy/paste. I'd think we would recalibrate, have the instruction, and then say "OK, time to edge again slave" Spelling: recalibrate is missing an L.
"Do not cum slave
Let's take a short break
Edge Count: 1 / Volume: 62.00000000000003% / Orgasms 0
Edge Count: 1 / Volume: 0% / Orgasms 0
OK, let's recaibrate
OK, time to edge again slave
Turn the power up until it feels same as before

When getting the "Let's turn the power up" scenario the timer runs out but the audio doesn't stop until the text actually displays "Turn the power up until..." Which it seems can be a solid 5-10 seconds after the timer completes.

After the scene with Mistress Bianca "I want to do another slideshow edge slave", she said my last run was pathetic and I needed to do more,(first run softcore, this run was ass), this was edge 19 at the end of that run, but after that, all I got was Bryci over and over again all the way to edge 31(11 runs of Bryci in a row) when I decided to mash the "I came" button figuring I might as well test that since I wasn't testing additional characters. Bryci doesn't show any categories other than ass pictures and I had the opportunity to choose them all. This was on three separate runs involving closing the browser, wiping cookies, logging back into Milovana and rerunning, still all ass pics.

With the above experience, I'm trying to figure out what the levels are about. I didn't see any prompts about it and apart from the 'turn the power up' increasing higher and having a longer timer, I'm not seeing a difference between levels. Is there supposed to be something more noticeable or is it mostly the 'power up' being more challenging? Perhaps I'm not passing through the levels because it seems like it's intended to be an endless tease to the point where "I came" gets clicked.

On one of the runs, I logged into Milovana first, started the tease and it defaulted to 40% volume when I have it configured to 60%, so I restarted the tease and checked the settings and it showed it was at 60%, I ran the tease and it was at 60%. It seems it doesn't load the saved settings until you click settings to view what they are.
I realize this is quite the novel to read through and look into but I used to work an IT job where I was doing beta testing and I have a knack for pulling errors and documenting glitches. I tried to provide the names of people, actions, and what was being displayed before and during any failures, hopefully I covered what's needed to look into a few areas that got stuck.
I didn't proofread as much as I wanted to on this run because I was trying to remember the steps things were on in case a freeze occurred, I could say where it occurred.

With all of this being said. I'm impressed with what you've put together and am surprised how nice the images look in the EOS tease format versus what Nyx/Flashtease used to allow. I really like the level of interaction that this tease needs while playing, rather than clicking start and allowing the tease to run itself.

Re: [Closed Beta Feedback Thread] - Estim Experiment Day 2

Posted: Thu Jul 09, 2020 10:47 am
by Takenaga
Although I am not testing this tease, I'm looking forward to the final release!
I love interactivity during the tease so by the comments from other readers I seem to be lucky.

Thanks and keep up the great work!

Re: [Closed Beta Feedback Thread] - Estim Experiment Day 2

Posted: Thu Jul 09, 2020 11:19 am
by boundupone
Electro wrote: Thu Jul 09, 2020 9:37 am It seems there is no calibration audio in the calibration sequence, so I restarted my browser and tried multiple times, including after getting the running through the tease.

I also noticed when testing dialog options in settings that if I choose custom for anything except the first option, it will populate NaN instead of giving an input field. I also noticed that if I choose 2, 4, 6, and 8 as options, I've managed to freeze it 3 times after clicking to advance at the "OK, let's check everything" prompt(the prompt stays there but the arrow disappears) ..but if I choose all the default options and then click change, it goes to the main menu(instead of asking questions again) and then I can click settings and select 2,4,6,8 with the rest as defaults and it works fine. I've reproduced it working twice in two separate sessions with failures before and after when I didn't choose the defaults and then redo it.

Audio file volumes are low in comparison to other eStim files, even when they are at 100%(allowing my 60% recalibration to climb from 60% to 100% is easily possible unless I boost externally). I had to use an external software application to boost the volume +2.6db beyond my eStim device and laptop both being set to 100%. The trouble is that means all of the audio files were lowered too far for many devices, probably everything that isn't an ET312B or 2b even though the files themselves when turned louder do work great with DIY AudioStim devices.
Based on the design of this tease, it seems that any smaller differences in audio volume will get washed out and most things seemed quite level.
--There was one of the pain files that seemed *much* louder than the others. I don't have a filename to go off of and it seems it hits on random people because I got this audio with Bryci.
Spoiler: show
--There is also the two pain files from Asa and Kleio and they were both too quiet. 88.25%, get ready for pain again, 96.25%, TAKE IT SLAVE, 104.25%, HAHA. The volume doesn't get higher once it passes 100%. Hopefully that tells you which files.

Brooke freezes, she froze twice in the same spot(after restarting the tease with a fresh browser session and deleting cookies), so I don't think it's the usual and unfortunate common EOS freezes. She says "So let's play a little game And you must follow my instructions" [Image: Her hands on her knees] and it's frozen, I gave it a minute and then clicked Edging and nothing changed, audio didn't stop, after another minute I clicked I came to see if anything would happen and still frozen although the buttons disappeared when I clicked them.

Spelling error with Jana: "secretaries" instead of "secretarys"

Just wondering, is this the intended order of the text? This is a copy/paste. I'd think we would recalibrate, have the instruction, and then say "OK, time to edge again slave" Spelling: recalibrate is missing an L.
"Do not cum slave
Let's take a short break
Edge Count: 1 / Volume: 62.00000000000003% / Orgasms 0
Edge Count: 1 / Volume: 0% / Orgasms 0
OK, let's recaibrate
OK, time to edge again slave
Turn the power up until it feels same as before

When getting the "Let's turn the power up" scenario the timer runs out but the audio doesn't stop until the text actually displays "Turn the power up until..." Which it seems can be a solid 5-10 seconds after the timer completes.

After the scene with Mistress Bianca "I want to do another slideshow edge slave", she said my last run was pathetic and I needed to do more,(first run softcore, this run was ass), this was edge 19 at the end of that run, but after that, all I got was Bryci over and over again all the way to edge 31(11 runs of Bryci in a row) when I decided to mash the "I came" button figuring I might as well test that since I wasn't testing additional characters. Bryci doesn't show any categories other than ass pictures and I had the opportunity to choose them all. This was on three separate runs involving closing the browser, wiping cookies, logging back into Milovana and rerunning, still all ass pics.

With the above experience, I'm trying to figure out what the levels are about. I didn't see any prompts about it and apart from the 'turn the power up' increasing higher and having a longer timer, I'm not seeing a difference between levels. Is there supposed to be something more noticeable or is it mostly the 'power up' being more challenging? Perhaps I'm not passing through the levels because it seems like it's intended to be an endless tease to the point where "I came" gets clicked.

On one of the runs, I logged into Milovana first, started the tease and it defaulted to 40% volume when I have it configured to 60%, so I restarted the tease and checked the settings and it showed it was at 60%, I ran the tease and it was at 60%. It seems it doesn't load the saved settings until you click settings to view what they are.
I realize this is quite the novel to read through and look into but I used to work an IT job where I was doing beta testing and I have a knack for pulling errors and documenting glitches. I tried to provide the names of people, actions, and what was being displayed before and during any failures, hopefully I covered what's needed to look into a few areas that got stuck.
I didn't proofread as much as I wanted to on this run because I was trying to remember the steps things were on in case a freeze occurred, I could say where it occurred.

With all of this being said. I'm impressed with what you've put together and am surprised how nice the images look in the EOS tease format versus what Nyx/Flashtease used to allow. I really like the level of interaction that this tease needs while playing, rather than clicking start and allowing the tease to run itself.
Awesome,thanks for so much feedback, am working my way through everything, I will show in first post as issues are resolved/found (will update later today as not got time to update everything now)

Re: [Closed Beta Feedback Thread] - Estim Experiment Day 2

Posted: Thu Jul 09, 2020 1:47 pm
by Psychological-Ad4569
Could I participate in this test? I own an ET312b. Thanks !

Re: [Closed Beta Feedback Thread] - Estim Experiment Day 2

Posted: Thu Jul 09, 2020 2:17 pm
by boundupone
Psychological-Ad4569 wrote: Thu Jul 09, 2020 1:47 pm Could I participate in this test? I own an ET312b. Thanks !
OK, link sent, last tester for now then.

Re: [Closed Beta Feedback Thread] - Estim Experiment Day 2

Posted: Thu Jul 09, 2020 3:29 pm
by v0ltaire
ah damn, looks like i found this thread a tad too late. whenever a spot opens for another diy powerbox beta tester, i'd be happy to chime in. as a sw developer, i'd make sure to give useful and concise feedback. love day 1, although for diy boxes, the audio only works well in the offline version.

Re: [Closed Beta Feedback Thread] - Estim Experiment Day 2

Posted: Thu Jul 09, 2020 6:30 pm
by Electro
"I know why the edge button does not re-appear with this route through the tease, but I haven't been able to replicate the issue with no progress in this section"
What I was trying to say was that the edge button is clicked, it causes the tease to become unresponsive, requiring a restart. It's not that the button isn't showing up because it is there.

Re: [Closed Beta Feedback Thread] - Estim Experiment Day 2

Posted: Thu Jul 09, 2020 6:32 pm
by boundupone
Electro wrote: Thu Jul 09, 2020 6:30 pm "I know why the edge button does not re-appear with this route through the tease, but I haven't been able to replicate the issue with no progress in this section"

What I was trying to say was that the edge button is clicked, it causes the tease to become unresponsive, requiring a restart. It's not that the button isn't showing up because it is there.
Hmm, I haven't been able to replicate this. Can you try again and see if any of the updates I made have improved things please

Re: [Closed Beta Feedback Thread] - Estim Experiment Day 2

Posted: Thu Jul 09, 2020 6:38 pm
by Electro
Ok, I'm going to make another run through to check that the things/characters in the fixed list are working properly and to see if any other issues reproduce or come up.
Are there any particular areas of focus for testing that I should focus on apart from those? I've been assuming that once I hit a slideshow after a story that the test for that character is pretty much done, and I click edging to continue even if I'm not edging yet. ..at least it's the only way I feel I can make it to the end while being sure I don't blow it too early, especially if I run into a beta snag and need to restart the whole thing a time or two. Also you said there is an ending but I'm not sure how to test that, my last run had more edges than the settings suggested I should have gone through to hit the final level, even if I add 3+5+.. together. Unless I'm misunderstanding.

Re: [Closed Beta Feedback Thread] - Estim Experiment Day 2

Posted: Thu Jul 09, 2020 6:42 pm
by boundupone
Electro wrote: Thu Jul 09, 2020 6:38 pm Ok, I'm going to make another run through to check that the things/characters in the fixed list are working properly and to see if any other issues reproduce or come up.
Are there any particular areas of focus for testing that I should focus on apart from those? I've been assuming that once I hit a slideshow after a story that the test for that character is pretty much done, and I click edging to continue even if I'm not edging yet. ..at least it's the only way I feel I can make it to the end while being sure I don't blow it too early, especially if I run into a beta snag and need to restart the whole thing a time or two. Also you said there is an ending but I'm not sure how to test that, my last run had more edges than the settings suggested I should have gone through to hit the final level, even if I add 3+5+.. together. Unless I'm misunderstanding.
Really I am testing that the tease is stable and everything works properly with no crashes, and you are rightm when you get to the slideshow that mistress is done . To get to the end it should be when you get to level 5 Bianca takes you a bit of a different route and doesn't send you back into the tease. You should basically get some pain, and then she sends you away as this is an edging tease, so no release, but let me know if this still isnt working right

Re: [Closed Beta Feedback Thread] - Estim Experiment Day 2

Posted: Thu Jul 09, 2020 10:00 pm
by Electro
boundupone wrote: Thu Jul 09, 2020 6:42 pm Really I am testing that the tease is stable and everything works properly with no crashes, and you are rightm when you get to the slideshow that mistress is done . To get to the end it should be when you get to level 5 Bianca takes you a bit of a different route and doesn't send you back into the tease. You should basically get some pain, and then she sends you away as this is an edging tease, so no release, but let me know if this still isnt working right
There are two people who want me to stroke while being stimmed, I'm really not all about touching the electricity intentionally with my hands and prefer the stim anyway, but I guess that might just be my opinion.

I'm not sure if the volume meter is supposed to show up in all of the slideshows but it seems like it isn't always there, maybe this is by design, I don't really miss it but I figured I'd mention it. I know it wasn't there for Penny or Kaleesy but there were others but I stopped taking notes on that because I really wasn't worried about it.

"Let's recabriate" still missing the L.
Spoiler: show
I recognize the first file with Asa/Kleio, I never found to be all that painful of a file. - 88.25%, get ready for pain again 103.25%, TAKE IT SLAVE 115.25%, HAHA 100.25%, a little break Still seeing the over 100% stuff and the file feels even lower than anything else in the tease, so I cranked the volume further just to feel it. The second file feels more like a pain file although it's volume still is lower than the other files in the tease too even though it also went over 100%.

I'm still not finding the end and I think I've hit all of the characters. I've been at it for nearly 3 hours and 27 edges on the current run that I'm on. I don't see the status of what level I'm on but the default level thing suggests I should be done by now. Yesterday it was over 30 edges and became 100% Bryci, this time it's Bryci and Bianca telling me I'm pathetic but she also seems to think I've had 0 pictures before edging half the time, not sure if she is remembering things properly.