Milovana.com

I am super excited to announce the release of the E-Stim Control App!

ESC is an application that allows you to use estim with milovana's regular and metronome teases, and to add additional functionality to your estim sessions. It has several functions and can be used both as a middleware to alter an existing estim audio stream, or to synthesize estim audio itself.

Download Link:
http://www.mediafire.com/file/ffqrzmwet ... C.zip/file

Details of Available Modules:

Spoiler: show

ESC Control Modules:
-Swap: swap the left and right channels. It fades
between settings so it can even be used while you
are stimming completely painlessly.

-Fade-In: Reduces the level by a certain decibel amount
and smoothly fades back to 0dB reduction over a certain
amount of time. Very useful on long estim tracks so that
they start at a pleasent level and force the cum out of you at
the end.

-Output Meter: simply shows the audio levels that are sent out of
the application.

ESC Source Modules: Where the Estim comes from, only one can be on at a time.
-Use Original Audio: intercepts estim audio playing in another application
allows you to alter it with the Control Modules.

-Metronome Synth: Analyzes metronome audio from another application
synthesizes estim based on it. Stim through your favorite metronome
teases on Milovana!

-Stroker Synth: Completes a certain number of strokes at either a slow,
medium, or fast speed. Stim through your favorite teases on
Milovana! The only source that works without the VB cable software.

-Synth Settings: you can change the coarseness of the stim synthesis.

The application is a free to use, standalone software built with Max/msp. There are detailed setup instructions in the ESC app.

Along with ESC,you will need an audio routing software to route audio between applications. I recommend vb audio's Cable: https://www.vb-audio.com/Cable/
More details on this in the ESC app.

-Batman

Wow, just wow! It works like a charm.
It's a bit complex, but once you grasp how it work it's great to use.

I did not tried it with regular estim sound, just played an EOS tese with it.

I didn't run into any bugs yet, that's a big plus :D

Thank you, it's definietly something that can bring teases to a whole new level.

Ooh, looks interesting. No time to play right now but will definatley check this out

Same! :)

Ok .. so I'm missing something ..

installed ESC .. installed VBCable ..

Set VBCable as default audio device, start something in browser .. I can "see" in system audio control sound going into VBCable.

In ESC .. dbl click on red "adc-12" button .. get audio status dialog. Input device, try to set it to VBCable .. but it's not there .. just my headset mic ...
??

How do you get VBCable to show up in that Input Device drop down?

Have you rebooted after installation?
Works for me, just played a bit around, cool idea and cool app!

Is there any chance for a mode that will translate normal audio into an estim signal?
Like when you listen to music or something else that this audio depending on volume, frequency etc would translated into a estim signal?
At the moment it seems to do nothing when I input a music source, what makes sense when it's looking for a metronome signal.

Would love a programm that could do somthing like that!

It did take a few hours to master, but well worth the time.

I am actually testing it while listening to a Chaturbate room. As the girls are tipped, they vocalize and the sounds are turned into safe e-stim signals. I can watch them live and get estimmed. If they are heavily vibrated, I get a nice long session.

Good job.

yeah, rebooted overnight .. installed it yesterday ;)

Thanks everyone for the feedback!
I’m glad that everyone seems to be enjoying it.
My vision for the app is that its versatile enough to be a standard tool that you incorporate into all of your estim sessions.

I did notice a small bug in the metronome that it sometimes won’t work if there is sound playing when it is first turned on. I will update the version next week.

Otto_dix: using it with chaturbate is really interesting. I’m actually surprised that it worked. The metronome is only allowed to trigger after a certain amount of “silence/low amplitude”, which is why music or audio typically won’t work.

Ditto: you might have to change the audio driver in that window to get the VB cable to show up as a source.

lolol2: I have a couple of thoughts about your “audio controlled synth” idea:
1. It is only possible to send the audio to a single output device. So you would have to choose between hearing it or stimming it. Unless you opened the same video in Firefox and chrome at the same time and used one for each sound output destination. Or I could add a 4 channel output option from the app that could be used if you have a device that can output more than stereo.
2. The dynamic range of our hearing is much larger than stimming. So it would be hard to control levels.

I do think it could be interesting to filter out low frequencies and then use audio as the carrier wave. Currently the carrier is just a 750 Hz sine. Then it’s amplitude modulated by a sine between 6-50Hz depending on the roughness setting. I will try it out and add it if it works.

I’m interested to hear your thoughts,

-Batman

Will it work with most cock hero videos. Can't wait to test that out tonight.

I presume this is for Windows only?

otto_dix : I’m assuming you mean the metronome module. it will probably NOT work with most/all cock hero vids, just because of how the audio is being analyzed. Picking out a single sound from a complex audio source is very tricky and will never be 100% consistent because of how different the cock heros are.

thebears73: It can be used on both Mac and Windows. The setup instructions are written for Windows, so you will have to adapt them to your system.

-Batman314

Batman314 wrote: Thu Nov 28, 2019 4:24 am
Ditto: you might have to change the audio driver in that window to get the VB cable to show up as a source.

Sorry, what driver ?
Everything shows up in the audio properties ... but doesn't show up in your app in the list of input devices ..

is your app only looking for "default communication" or something?

Ditto wrote: Thu Dec 05, 2019 6:03 pm

Batman314 wrote: Thu Nov 28, 2019 4:24 am
Ditto: you might have to change the audio driver in that window to get the VB cable to show up as a source.

Sorry, what driver ?
Everything shows up in the audio properties ... but doesn't show up in your app in the list of input devices ..

is your app only looking for "default communication" or something?

Here is my audio status window:
ad_mme is set as my audio driver in the ESC app, this is what I was referring to.

Batman314 wrote: Thu Dec 05, 2019 10:59 pm

Ditto wrote: Thu Dec 05, 2019 6:03 pm

Batman314 wrote: Thu Nov 28, 2019 4:24 am
Ditto: you might have to change the audio driver in that window to get the VB cable to show up as a source.

Sorry, what driver ?
Everything shows up in the audio properties ... but doesn't show up in your app in the list of input devices ..

is your app only looking for "default communication" or something?

Here is my audio status window:
ad_mme is set as my audio driver in the ESC app, this is what I was referring to.

Yeah, I have it set to ad_mme as well .. but no VB Cable shows up in the list (yes it is installed, and I do see it in windows)