Milovana.com

rubber_sub wrote: Wed May 30, 2018 2:02 am Have a question about the settings pages. I am using 55.5 and even though I have all local image and URL image paths set, I still see that the settings screen reports that some scripts are not available.

Please see the attached picture.

A few questions:
1.) If the script is selected, even though requirements aren't met, will this affect TeaseAI deciding whether or not to choose the script?
2.) What file stores the settings?
3.) Can I manually edit the settings file to override / fix this? If so, how?

Thanks,

rubber_sub

The "requirements not met" is a bug that showed up after the ability to set url files for genres got added. If you know for example that you have both a boobs and butts folder/file set, then feel free to ignore it. It will not affect anything during a session.
If something is truly missing then you'll get a generic error image whenever a script tries to show that particular missing genre or whatever.

avatarbr wrote: Thu Jun 07, 2018 10:04 pm
What Personality are you playing....looks like MissBlue maybe? You need to check in that thread to see what you need to change to fix.

Mayby I'm not looking at the right place in that thread, but I Can't find on any page what to change/how to fix it .
Just need to know what to do for fixing it.

bikkel89 wrote: Fri Jun 08, 2018 6:29 pm

avatarbr wrote: Thu Jun 07, 2018 10:04 pm
What Personality are you playing....looks like MissBlue maybe? You need to check in that thread to see what you need to change to fix.

Mayby I'm not looking at the right place in that thread, but I Can't find on any page what to change/how to fix it .
Just need to know what to do for fixing it.

Did you checked this? viewtopic.php?p=249494#p249494

avatarbr wrote: Sat Jun 09, 2018 2:03 am

bikkel89 wrote: Fri Jun 08, 2018 6:29 pm

avatarbr wrote: Thu Jun 07, 2018 10:04 pm
What Personality are you playing....looks like MissBlue maybe? You need to check in that thread to see what you need to change to fix.

Mayby I'm not looking at the right place in that thread, but I Can't find on any page what to change/how to fix it .
Just need to know what to do for fixing it.

Did you checked this? viewtopic.php?p=249494#p249494

That will fix the chastity problem, but not the other bigger problem that she always says that it is a while ago (more than 21 days) that we ''talked''. When it is really just 1 day ago.

PtheV wrote: Sat Jun 09, 2018 10:36 am

bikkel89 wrote: Sat Jun 09, 2018 10:13 am That will fix the chastity problem, but not the other bigger problem that she always says that it is a while ago (more than 21 days) that we ''talked''. When it is really just 1 day ago.

Looks like a problem with Miss Blue. Could you anwer the following:
1- which version of Miss Blue are you running?
2- what value does the variable pvLastSession have? (it's in System/Variables of your personality folder)
3- do your sessions always end with the "(your domme) has logged off" message?

1. Version 1.07
2. This is not a .txt file but it says: ''4-5-18 XX:XX:XX''
3. No never, It just always doesn't show any slideshow pics anymore. So the screen goes black, and she is not ''talking'' anymore.


Looks like point 2 & 3 are the problem. We're getting there. how do I fix this?

PtheV wrote: Sun Jun 10, 2018 11:18 am

bikkel89 wrote: Sun Jun 10, 2018 10:29 am 1. Version 1.07
2. This is not a .txt file but it says: ''4-5-18 XX:XX:XX''
3. No never, It just always doesn't show any slideshow pics anymore. So the screen goes black, and she is not ''talking'' anymore.


Looks like point 2 & 3 are the problem. We're getting there. how do I fix this?

For some reason your sessions don't end properly and as a result the script keeps 'thinking' your last session was on May 4. The question is, why does this happen... Could you type @ when the program stops working and post whatever the program gives as a result (should be the latest script/taunt line)?

When I just type ''@'' At the end ist says:

::: TYPO :::
::: FileText = ::: LineVal = -1
::: TauntText = ::: LineVal = 0
::: ResponseFile = ::: LineVal = 0

Still same date in ''pvLastSession''

I tried to create URL file but it returnet and error log to me. I use ver. 54.9., if patch notes it's mentioned that bug with creating URL files should be fixed in this version - is it the same as with previous versions or not ? Eventually, how can I fix it ?

I attached picture of the error log, but unfortunatelly it's not in english, since my windows is not as well.

It says that it's line 21, position 29.

rebekeplex wrote: Fri Jul 06, 2018 11:30 pm I tried to create URL file but it returnet and error log to me. I use ver. 54.9., if patch notes it's mentioned that bug with creating URL files should be fixed in this version - is it the same as with previous versions or not ? Eventually, how can I fix it ?

Can confirm, same problem. Win 10 here. Tease AI Ver. 54.9. I'll post the full error details, if that's any help:

Spoiler: show

Unhandled exception has occurred in your application. If you click Continue, the application will ignore this error and attempt to continue. If you click Quit, the application will close immediately.

An error occurred while parsing EntityName. Line 21, position 29.

v Details
--------------
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.

************** Exception Text **************
System.Xml.XmlException: An error occurred while parsing EntityName. Line 21, position 29.
at Tease_AI.URL_Files.URL_File_BGW.Me_RunWorkerCompleted(Object sender, RunWorkerCompletedEventArgs e) in C:\Users\Elijah\Documents\Visual Studio 2010\Projects\Tease-AI\Tease AI\Classes\URL_Files_BGW.vb:line 238
at System.ComponentModel.BackgroundWorker.OnRunWorkerCompleted(RunWorkerCompletedEventArgs e)
at System.ComponentModel.BackgroundWorker.AsyncOperationCompleted(Object arg)


************** Loaded Assemblies **************
mscorlib
Assembly Version: 4.0.0.0
Win32 Version: 4.7.3131.0 built by: NET472REL1LAST
CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/mscorlib.dll
----------------------------------------
Tease AI
Assembly Version: 0.54.9.0
Win32 Version: 1.0.0.0
CodeBase: file:///E:/(TeaseAI directory)/Tease%20AI/Tease%20AI.exe
----------------------------------------
Microsoft.VisualBasic
Assembly Version: 10.0.0.0
Win32 Version: 14.7.3056.0 built by: NET472REL1
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/Microsoft.VisualBasic/v4.0_10.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualBasic.dll
----------------------------------------
System.Windows.Forms
Assembly Version: 4.0.0.0
Win32 Version: 4.7.3056.0 built by: NET472REL1
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System
Assembly Version: 4.0.0.0
Win32 Version: 4.7.3056.0 built by: NET472REL1
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Drawing
Assembly Version: 4.0.0.0
Win32 Version: 4.7.3056.0 built by: NET472REL1
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
System.Configuration
Assembly Version: 4.0.0.0
Win32 Version: 4.7.3056.0 built by: NET472REL1
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
----------------------------------------
System.Core
Assembly Version: 4.0.0.0
Win32 Version: 4.7.3110.0 built by: NET472REL1LAST_C
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dll
----------------------------------------
System.Xml
Assembly Version: 4.0.0.0
Win32 Version: 4.7.3056.0 built by: NET472REL1
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
Accessibility
Assembly Version: 4.0.0.0
Win32 Version: 4.7.3056.0 built by: NET472REL1
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/Accessibility/v4.0_4.0.0.0__b03f5f7f11d50a3a/Accessibility.dll
----------------------------------------
System.Runtime.Remoting
Assembly Version: 4.0.0.0
Win32 Version: 4.7.3056.0 built by: NET472REL1
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Runtime.Remoting/v4.0_4.0.0.0__b77a5c561934e089/System.Runtime.Remoting.dll
----------------------------------------
System.Speech
Assembly Version: 4.0.0.0
Win32 Version: 4.7.3056.0 built by: NET472REL1
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Speech/v4.0_4.0.0.0__31bf3856ad364e35/System.Speech.dll
----------------------------------------
AxInterop.WMPLib
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///E:/(TeaseAI directory)/Tease%20AI/AxInterop.WMPLib.DLL
----------------------------------------
Interop.WMPLib
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///E:/(TeaseAI directory)/Tease%20AI/Interop.WMPLib.DLL
----------------------------------------
Microsoft.GeneratedCode
Assembly Version: 1.0.0.0
Win32 Version: 4.7.3056.0 built by: NET472REL1
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
Microsoft.mshtml
Assembly Version: 7.0.3300.0
Win32 Version: 7.0.3300.0
CodeBase: file:///C:/WINDOWS/assembly/GAC/Microsoft.mshtml/7.0.3300.0__b03f5f7f11d50a3a/Microsoft.mshtml.dll
----------------------------------------

************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.

For example:

<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>

When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.

I tried so many ways to make the URL Files at this point.
On 55.3, I get the same error. On another Win 10 laptop, same error. On a Win XP, it gives me a different error. On an earlier version of the app, it tells me the links don't exist at all.
I tried multiple links, both sfw and nsfw and none seem to work.
Any help would be much appreciated.
Thank you!

PS: Alternatively, if anyone has some URL Files that they can share, that'd be great, since I can't make em.

YoungManStuff wrote: Thu Jul 12, 2018 11:05 am PS: Alternatively, if anyone has some URL Files that they can share, that'd be great, since I can't make em.

I uploaded my URL files(67 MB, 133 files) here: https://mega.nz/#!MmRDlYwS!xJUNgerTrqp2 ... 0sLfapR2Z4
Extract the file inside the main Tease AI folder(where you have the .exe file) and everything will be ok.

Bye!

tigrotto wrote: Thu Jul 12, 2018 2:47 pm I uploaded my URL files(67 MB, 133 files) here: https://mega.nz/#!MmRDlYwS!xJUNgerTrqp2 ... 0sLfapR2Z4
Extract the file inside the main Tease AI folder(where you have the .exe file) and everything will be ok.

Bye!

Thanks a bunch, dude! Kept getting errors each time a script attempt to pull out a blog image, since I had none.
These should do the trick.

YoungManStuff wrote: Thu Jul 12, 2018 5:15 pm

tigrotto wrote: Thu Jul 12, 2018 2:47 pm I uploaded my URL files(67 MB, 133 files) here: https://mega.nz/#!MmRDlYwS!xJUNgerTrqp2 ... 0sLfapR2Z4
Extract the file inside the main Tease AI folder(where you have the .exe file) and everything will be ok.

Bye!

Thanks a bunch, dude! Kept getting errors each time a script attempt to pull out a blog image, since I had none.
These should do the trick.

You're welcome!
However you need to seed a URL file for each genre of images like this: To do that you need to open the Tease AI settings and select Images>Genre Images: That's all!

Bye!

tigrotto wrote: Thu Jul 12, 2018 7:55 pm

YoungManStuff wrote: Thu Jul 12, 2018 5:15 pm

tigrotto wrote: Thu Jul 12, 2018 2:47 pm I uploaded my URL files(67 MB, 133 files) here: https://mega.nz/#!MmRDlYwS!xJUNgerTrqp2 ... 0sLfapR2Z4
Extract the file inside the main Tease AI folder(where you have the .exe file) and everything will be ok.

Bye!

Thanks a bunch, dude! Kept getting errors each time a script attempt to pull out a blog image, since I had none.
These should do the trick.

You're welcome!
However you need to seed a URL file for each genre of images like this:Cattura di schermata (172).png

To do that you need to open the Tease AI settings and select Images>Genre Images:Cattura di schermata (173).png

That's all!

Bye!

Thanks for the URL files and guide how to use them properly. I recently started to be interested in the TAI, but from my broad research it looks like 1885 was not active lately. And since I have no idea how well is the rest of the community able to continue with the development, can anyone tell me a brief status of the TAI development situation ?

rebekeplex wrote: Thu Jul 12, 2018 11:21 pm
Thanks for the URL files and guide how to use them properly. I recently started to be interested in the TAI, but from my broad research it looks like 1885 was not active lately. And since I have no idea how well is the rest of the community able to continue with the development, can anyone tell me a brief status of the TAI development situation ?

Development stoped, but the last unofficial version it's stable enough to use: viewtopic.php?f=26&t=20047

There are people working on a Java version of TAI here: viewtopic.php?f=26&t=20717
Note, Personalities need to be converted or ported to the java version, and there are just 1 demo version available right now.


You can check the link in my signature to find almost all TAI content. Note, Just HoT and MissBlue are the personalities actives.

YoungManStuff wrote: Thu Jul 12, 2018 11:05 am

rebekeplex wrote: Fri Jul 06, 2018 11:30 pm I tried to create URL file but it returnet and error log to me. I use ver. 54.9., if patch notes it's mentioned that bug with creating URL files should be fixed in this version - is it the same as with previous versions or not ? Eventually, how can I fix it ?

Can confirm, same problem. Win 10 here. Tease AI Ver. 54.9. I'll post the full error details, if that's any help:

Spoiler: show

Unhandled exception has occurred in your application. If you click Continue, the application will ignore this error and attempt to continue. If you click Quit, the application will close immediately.

An error occurred while parsing EntityName. Line 21, position 29.

v Details
--------------
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.

************** Exception Text **************
System.Xml.XmlException: An error occurred while parsing EntityName. Line 21, position 29.
at Tease_AI.URL_Files.URL_File_BGW.Me_RunWorkerCompleted(Object sender, RunWorkerCompletedEventArgs e) in C:\Users\Elijah\Documents\Visual Studio 2010\Projects\Tease-AI\Tease AI\Classes\URL_Files_BGW.vb:line 238
at System.ComponentModel.BackgroundWorker.OnRunWorkerCompleted(RunWorkerCompletedEventArgs e)
at System.ComponentModel.BackgroundWorker.AsyncOperationCompleted(Object arg)


************** Loaded Assemblies **************
mscorlib
Assembly Version: 4.0.0.0
Win32 Version: 4.7.3131.0 built by: NET472REL1LAST
CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/mscorlib.dll
----------------------------------------
Tease AI
Assembly Version: 0.54.9.0
Win32 Version: 1.0.0.0
CodeBase: file:///E:/(TeaseAI directory)/Tease%20AI/Tease%20AI.exe
----------------------------------------
Microsoft.VisualBasic
Assembly Version: 10.0.0.0
Win32 Version: 14.7.3056.0 built by: NET472REL1
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/Microsoft.VisualBasic/v4.0_10.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualBasic.dll
----------------------------------------
System.Windows.Forms
Assembly Version: 4.0.0.0
Win32 Version: 4.7.3056.0 built by: NET472REL1
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System
Assembly Version: 4.0.0.0
Win32 Version: 4.7.3056.0 built by: NET472REL1
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Drawing
Assembly Version: 4.0.0.0
Win32 Version: 4.7.3056.0 built by: NET472REL1
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
System.Configuration
Assembly Version: 4.0.0.0
Win32 Version: 4.7.3056.0 built by: NET472REL1
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
----------------------------------------
System.Core
Assembly Version: 4.0.0.0
Win32 Version: 4.7.3110.0 built by: NET472REL1LAST_C
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dll
----------------------------------------
System.Xml
Assembly Version: 4.0.0.0
Win32 Version: 4.7.3056.0 built by: NET472REL1
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
Accessibility
Assembly Version: 4.0.0.0
Win32 Version: 4.7.3056.0 built by: NET472REL1
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/Accessibility/v4.0_4.0.0.0__b03f5f7f11d50a3a/Accessibility.dll
----------------------------------------
System.Runtime.Remoting
Assembly Version: 4.0.0.0
Win32 Version: 4.7.3056.0 built by: NET472REL1
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Runtime.Remoting/v4.0_4.0.0.0__b77a5c561934e089/System.Runtime.Remoting.dll
----------------------------------------
System.Speech
Assembly Version: 4.0.0.0
Win32 Version: 4.7.3056.0 built by: NET472REL1
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Speech/v4.0_4.0.0.0__31bf3856ad364e35/System.Speech.dll
----------------------------------------
AxInterop.WMPLib
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///E:/(TeaseAI directory)/Tease%20AI/AxInterop.WMPLib.DLL
----------------------------------------
Interop.WMPLib
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///E:/(TeaseAI directory)/Tease%20AI/Interop.WMPLib.DLL
----------------------------------------
Microsoft.GeneratedCode
Assembly Version: 1.0.0.0
Win32 Version: 4.7.3056.0 built by: NET472REL1
CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
Microsoft.mshtml
Assembly Version: 7.0.3300.0
Win32 Version: 7.0.3300.0
CodeBase: file:///C:/WINDOWS/assembly/GAC/Microsoft.mshtml/7.0.3300.0__b03f5f7f11d50a3a/Microsoft.mshtml.dll
----------------------------------------

************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.

For example:

<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>

When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.

I tried so many ways to make the URL Files at this point.
On 55.3, I get the same error. On another Win 10 laptop, same error. On a Win XP, it gives me a different error. On an earlier version of the app, it tells me the links don't exist at all.
I tried multiple links, both sfw and nsfw and none seem to work.
Any help would be much appreciated.
Thank you!

PS: Alternatively, if anyone has some URL Files that they can share, that'd be great, since I can't make em.

Is somebody working on a fix for this? It seems like it is coming out of the blue.... Or as I'm writing this, it could be because of the latest windows update?! There was one just a couple of weeks ago, if I remember correctly.

I think I may have a possible workaround for the URL issue. If you download the java version of Tease AI which is being developed you can use that to create a URL file. Once you have created the file you can then copy the URL file to Tease AI and use it. In order for it to work you need to edit the text file that Tease AI Java makes by deleting the first two lines. If you open the Tease AI Java URL file you will see something like this as the first two lines:

https://gifsexwall.tumblr.com
true

Copy the file to the appropriate folder in Tease AI open it, delete those lines and save the file.

To find the URL files in Tease AI Java go to the folder where the program is located and look in the following folder: Images\System\URL Files

In Tease AI regular they are located in the same folder (TeaseAI\Images\System\URL Files

Having said all that I have only tried this by loading the new URL file that I saved by going to URL Files in the Tease AI menu and then opened the URL file using the open URL dialogue. That works as pictures appear and you can move through one after the other and save them etc. It may be that they won't work in actual teases. I say this because in Tease AI the URL text files you added don't appear in the list of URL files but if you go to genre images and open the folder you will see it listed there and you can select it. I assume that they don't appear in the list of URL files because they only get added to that list when Tease AI creates the files itself. I am also assuming the fact that they aren't in that list will not prevent them from working as genre images (which may be an erroneous assumption). I am pretty busy at the moment so can't do any further experimenting for a few weeks so if any of you try this and it does work let us know.