Milovana.com

Finally had a chance to play this last night and wanted to leave you my feedback

+
Amazon video editing
Great selection of clips
Pacing fantastic
Love the slow teasing build up throughout
Used Lolol2 version of stim file, and was really good
Smooth, strong, teasing stim
built up nicely
Great, loved it

Wishes
I really would like something like this but with hard kink subject (hard bondage, bdsm, forced orgasms, pot, etc, happy with male or fem subs)
The cum section was a let down, after all the amazing details teasing stim, this section was kind of not there (very weak stim on my et312b, but every other section was great??). I was hoping for a more aggressive stroking sort of section to really force it out of me, but this section was more like a cooldown than cum section for me?

But overall really great work, thank you all so much

Any chance of reposting. MEGA listings are all down for the video

Mindmaniac wrote: Mon Apr 08, 2024 11:42 pm Any chance of reposting. MEGA listings are all down for the video

Estimhero(.)com usually has torrents or downloads separate from mega for cases like this.

I was able to find vi22 on their telegram and I know vi89 is also there.

Mindmaniac wrote: Mon Apr 08, 2024 11:42 pm Any chance of reposting. MEGA listings are all down for the video

I got you.

Spoiler: show

https://gofile.io/d/s4g88L
p:holapuerco

slightly off topic. I have the video of Klinik Vi33 but not the estim track. anyone willing to make it available?

Afapp wrote: Sun May 12, 2024 4:53 pm slightly off topic. I have the video of Klinik Vi33 but not the estim track. anyone willing to make it available?

the link from this post viewtopic.php?p=360655#p360655 is still up

Thanks @numberonefanofnumberonefan for the re-up of the video, but no estim files from this thread seem to be available. Can anyone provide a link? Appreciate the continued work on this series!

stangeorge2020 wrote: Wed May 22, 2024 10:48 pm Thanks @numberonefanofnumberonefan for the re-up of the video, but no estim files from this thread seem to be available. Can anyone provide a link? Appreciate the continued work on this series!

Hello,
https://mega.nz/folder/SRV3jZDZ#KWL3CIdnB5FAEUaMUQTrxA
inside folder "E-Stim CH Hybrid - Klinik Industries"
(please, don't direct download, import first)
Have fun.

For this new version of vi33a funscripts with the pulse rise time setting, the rest of the settings do matter because if you aren't within range for one, it can cause the others max out the duty cycle, but I don't see them anywhere.

I found that with anything over a 10 max on pulse width, you've got max duty cycle with a 600hz carrier frequency and a little higher and you have some headroom for gaps between pulses. If I use 20 as a max pulse width and looking at the duty cycle, even 1000hz doesn't keep the duty cycle in check.

To started with these settings, let me know how it compares for you edger477.

I set 600hz carrier frequency
pulse width range 4-10 (should this have been lower on the first number, I see other creations suggesting 3 or 4)
pulse rise time 1-10 because you said 1-10 somewhere else which makes me think the pulse width range max should be 10(or more, how much more?) ...but Restim v1.17 minimum is 2hz, I set it to 1-10 anyway because at least everything else scales to be correct
pulse frequency max 100

Is this about right where you put your settings? I imagine perhaps you used a higher carrier frequency, perhaps 800hz, but I prefer 600hz because it gives a deeper feel rather than a surface 'at the skin' feel that frequencies around 1000hz do, but I also realize this will amplify the intensity related to pulse width and rise effects. In any case, these settings above felt very intense in a good way compared to the version that came before pulse rise time version.

Electro wrote: Sat May 25, 2024 4:10 am
To started with these settings, let me know how it compares for you edger477.

I set 600hz carrier frequency
pulse width range 4-10 (should this have been lower on the first number, I see other creations suggesting 3 or 4)
pulse rise time 1-10 because you said 1-10 somewhere else which makes me think the pulse width range max should be 10(or more, how much more?) ...but Restim v1.17 minimum is 2hz, I set it to 1-10 anyway because at least everything else scales to be correct
pulse frequency max 100

Is this about right where you put your settings?

My settings (with which mp3 file is baked):

863 carrier frequency (using odd number makes it improbable there will occur a harmonic with some other frequency (pulse etc) and cause unpredictable oscillations.
Pulse width 3-10 (thinner pulses = less duty cycle)
Pulse rise time 2-10 (you can set 1 but it is still 2 :))
pulse frequency 1-150 (this and pulse rise time are main factors controlling the type of sensation and I think due to this it makes possible to create sensations that feel like much lower than 863 hz).

Also note that pulse rise time at 600 is 43% slower than at 863 (and also same pulse width produces higher duty cycle).

[/quote]

My settings (with which mp3 file is baked):

863 carrier frequency (using odd number makes it improbable there will occur a harmonic with some other frequency (pulse etc) and cause unpredictable oscillations.
Pulse width 3-10 (thinner pulses = less duty cycle)
Pulse rise time 2-10 (you can set 1 but it is still 2 :))
pulse frequency 1-150 (this and pulse rise time are main factors controlling the type of sensation and I think due to this it makes possible to create sensations that feel like much lower than 863 hz).
[/quote]

Are these the settings you used for the Nocturn and RoD EE rework?

samsonjude1776 wrote: Sat May 25, 2024 3:08 pm Are these the settings you used for the Nocturn and RoD EE rework?

Yes for mp3. Does not mean everyone should use it, you should play with settings to discover how they make difference. It is great that now you can customize this experience.

edger477 wrote: Sat May 25, 2024 3:49 pm

samsonjude1776 wrote: Sat May 25, 2024 3:08 pm Are these the settings you used for the Nocturn and RoD EE rework?

Yes for mp3. Does not mean everyone should use it, you should play with settings to discover how they make difference. It is great that now you can customize this experience.

Thanks..I just asked the same question in Discord. Yea I will adjust but like to have the creator's "vision" as a starting point.

Anyone link this video?