Finally had the time to take a look at it wired up, here are some thoughts, some is just personal preferences.
I wrote some notes while playing... I don't want to sound to bad but also want to give you what my experience was.
First please make the first page with instructions instant skippable with a button.
When you open the tease more than once that is very annoying.
Same for the intro, it's very long until the sessions are starting, would be cool to start instantly without the same story part over and over again.
I like to click some buttons from time to time but I think this is a bit too much because there are so many parts where you clicking on buttons.
First mistress was Katy, the vibrator levels felt kind of the same.
Ramp if there was one, was really low.
I clicked on the edge button after around 10min... edge button disappeared... I clicked I came and was redirected to the host, but the edge button didn't came back.
So the tease was broken -> reload
Then I changed the start and recalibration volume to 85% to lower the jumps a bit.
Tease broke and no stim files played at the first mistress, forgot the name of her.
So I started with the 60% volume button in the settings again.
First mistress was the girl in the blue chair with the white dress.
The slideshow of that girl had only <10 pics with an infinity loop?
She changed the stim file and the jump was way to high for me.
I clicked the edge button to skip her... same problem -> edge button disappeared -> reload
Next try Eliza was the first girl, was okay but the first volume power up had no effect.
I skipped her after a while -> edge button worked.
Jessa came up -> stroking with estim is not my thing -> skipped her with edge button
Clarissa was next, the volume text was dopple and the second text was always higher in volume than the first.
But session worked.
Ramp was for me way to fast... around 0,25% every 2 seconds?
No chance with my DIY unit, this will fry your dick.
Then the Bryci pic part came up.
The pace of the pics is very different, some only stay for a second and changing way to fast, I would raise the min time here a bit.
Christy was next -> stroking -> same as above -> skip
Bryci was next again? Mistake or is this planned to came up more than once?
I skipped the session with the edge button, the host played "another" file instantly -> this file felt like nothing with my device.
The calibration signal which was playing next was okay, so I guess this "another" file is a lot quieter?
Next Asa with the slave, that was the first really good session.
Even if I'm not this much into pain I liked it, the levels were just right, in the first part.
Until she changed the stim file, this one was already really strong in the beginning and the ramp up -> HELL
55% was already very strong
60% hurts!
65% limit
67% escape with edge button
Between 55% and 67% were only <2min?
I'm definitely not able to edge with something like that and the volume difference between 55 and 100% is an CRAZY amount of space.
Next the host played a pain file after clicking the edge button...
HELL!!! That singal is WAAAAAAAAAAAY to high on my device!
Possible that the balance will feel different with other devices but with my DIY unit this will not work.
Then the host started a pic show, counter started at 24 seen pictures?
Text volume dopple again with the second one shows higher volume.
Next Bryci with the 3rd time appearance.
Skipped her again.
Final test...
Maybe someone who like REALLY painfull stuff.
But shocks with an increasement of 10% with each time is just not playable with my device.
I did another start to see if I missed some random girls.
Jana was first, was okay but also started to get a bit boring after the infity loop started.
So skipped this after 3min.
Next Megan... played good for the around 2-3min.
Than she started with the "force" mode, this ramp was so crazy high that it started the recalibration again and again after <2min?
Also not playable with my device.
This should not sound to bad, maybe this will work with other devices but with my DIY unit I had nearly zero pleasure with this tease.
I had always the hand at the volume buttons because of those crazy changes in volumes.
I would say a volume ramp of 10% in 10min is okay, maybe 5min will work too... everything else is to crazy for me.
Specially when the signal jumps from 60% (recalibration) to 100% in <2min again and again.
Is this working with any other device? I thought the difference from 60 to 100% should be REALLY high on every other device too?
Just a few more generell tips.
I would always recommend to make a copy of your tease and never work on the live version you already private shared with people.
Create a backup and uploading it into another tease is done in <30sec.
So people can play with it while you are changing things and when you are done, upload the new version into the live version.
Later for the public version you can do this because it only changes with republishing.
I also would recommend to have only one version of your tease published later.
The first day with v1 and v2 is kind of confusing for people who are not following the forum.
Make sure your basic things are working fine before releasing the tease for everyone.
Seems like the missing edge button is still there.
I have noticed that the buttons in the notification area could be buggy some times and lead to errors.
But you can always just overwrite those buttons when using the same identifier.
So I would add this notification button just everytime the host comes up again, so you could for example click on the i came button and both buttons would appear again. Otherwise the tease will break completely.
Thanks for your work, even if the most parts are nothing for me because they are pain focused and my devices don't work with some other stuff, I always appreciate new content!