Depens on what you want to achieve.... They are totally different commands.avatarbr wrote: Tue May 23, 2017 9:53 pm Quick Question:
There are any problem using @CheckStrokingState (I dont remember the exact command ) on the start of the modules, instead of @StopStroking?
By no means an expert, but I'll try to answer what I can.ducaticarl wrote: Wed May 24, 2017 9:34 am hi everyone,hopefully someone will be able to help me or explain a few things,
i have installed tease ai with its builts in wicked personality and have gone through the Getting Started guide written by malaru
which as been amazing and helped loads,but there is a few questions i have that i cant seem to find the answers to,
im probably being a bit dumb and its probably quite obvious but i cant seem to get my head around it,
anyway hopefully someone may be able to put me in the right direction, i just wanted to get it all set up fully before
playing it and am just thinking i might be missing out on the full experiance because of something simple like not ticking
a few boxs, anyway here a few questions i have.
1: in regards to the suspend and resume setting i dont know what that is for, i assume its to suspend the dom so for example
if i go on holiday for 2 weeks i can suspend it and resume it when i return and then that way the dom does not assume i have just been ignoring her, same goes for some days in the week as i dont live alone i wont always be able to do a session so if i click the suspend and then resume when i can the dom will assume it is just the day after my last session.
2: i have read posts about text to speech but cant fine any option in the setting to allow this, is this something extra i have to
download and add or is that for other personalities that i have not installed yet, i only have the wicked one installed at the moment that came with the tease ai install.
3: in the step by step guide by malaru it mentions about videos but nothing more really, i assume in the settings there is a section to link a path to videos but i cant seem to find any in the install so are videos something i have to add my self and set up and then set a path to that folder in the settings.
4: games , i spotted a section in the settings for card game but the boxs are blank again i assume i have to place a path to the cards but again i cant find a folder with any in so same as videos above do i have to add my own or are they hidden in a folder somewhere in the ai install.
im sure i will have more but these are the ones i dont seem to understand at the moment, like i said im probably missing the point and those are probably with other personalities like house of tease or spicy etc but again would hate to miss out on something because i have negleted to set something up that i should have.
brian
Code: Select all
@SetVar[c]=[#Random([a],[b])]Yes, I just I want to include this "check" before the @StopStroking, because I am using @RamdomModule after reseting the variables on my system to check if all 4 modules already run, instead of rerun the same module.Daragorn wrote: Wed May 24, 2017 11:18 amDepens on what you want to achieve.... They are totally different commands.avatarbr wrote: Tue May 23, 2017 9:53 pm Quick Question:
There are any problem using @CheckStrokingState (I dont remember the exact command ) on the start of the modules, instead of @StopStroking?
@checkstrokingstate will move to the subparts of the script (Sub Stroking) or (Sub Not Stroking) depending on his state when it is used.... Apart for that, the command does nothing else... So if you want to tell the user to stop stroking you will still need to use @StopStroking in the (Sub Stroking) part of the script
), because I used 1 single @StopStroking on the first line (before checking the variable), when the correct would be put 4 (1 in each part).Not sure if this works, but in your example, should be something like that to get the variables:sweden123 wrote: Wed May 24, 2017 3:25 pm Is it possible to generate a random number between two variables, assuming they are both random numbers?
I was hoping this would work, but it doesn'tCode: Select all
@SetVar[c]=[#Random([a],[b])]
Code: Select all
@SetVar[c]=[#Random(#Var[a], #Var[b])
Hey, try that script (just copy/past in a text file and run via the debug menu):fenway wrote: Mon May 22, 2017 2:56 am Hey whenever the TEASE AI does a slideshow with Hentai and other pictures, it freaks out and displays the pictures for only a few milliseconds until it stalls on a picture for a couple seconds and then goes ballistic again... How do I fix this?
Hi, just replace that file inside Tease AI\Scripts\Wicked Tease\Stroke\Link I replaced all the @ShowHentaiImage for @ShowGayImage (and the references). You can edit to other options, if you want too.ducaticarl wrote: Thu May 25, 2017 8:17 am i have just started playing with ai and its wicked tease, and i was wondering, now and again my domme goes to the loo
for a pee , well infact she goes quite abit generally more than i do. LOL, must be female thing, anyway while she is in the loo
i am shown a slideshow of pictures to keep me busy while she is in the loo and told to stroke when hentie pictures are shown
but hands off when a pretty girl appears, im not really that much into hentie, do you think its possible to change it to perhaps
make me stroke when something humiliating comes on like gay or sissy images but hands off when a pretty girl appears or
is it just a case of changing the path to show those images and letting it continue telling me its hentie?
just something to had to my humiliation.
thankyou
brilliant thankyou that would be amazing i will do that.avatarbr wrote: Fri May 26, 2017 12:45 am I Drank Too Much Coffee.zipHi, just replace that file inside Tease AI\Scripts\Wicked Tease\Stroke\Linkducaticarl wrote: Thu May 25, 2017 8:17 am i have just started playing with ai and its wicked tease, and i was wondering, now and again my domme goes to the loo
for a pee , well infact she goes quite abit generally more than i do. LOL, must be female thing, anyway while she is in the loo
i am shown a slideshow of pictures to keep me busy while she is in the loo and told to stroke when hentie pictures are shown
but hands off when a pretty girl appears, im not really that much into hentie, do you think its possible to change it to perhaps
make me stroke when something humiliating comes on like gay or sissy images but hands off when a pretty girl appears or
is it just a case of changing the path to show those images and letting it continue telling me its hentie?
just something to had to my humiliation.
thankyou
I Drank Too Much Coffee.zip
I replaced all the @ShowHentaiImage for @ShowGayImage (and the references). You can edit to other options, if you want too.
But, if you are getting that script a lot, I think it's time to you try others personalities too. I just released House of Tease 4 with +200 modules
I believe it is calculated sequentially, but not in the way you described. First, it decides "will you have an orgasm?" If yes, then it asks "will this orgasm be ruined?" So for your example, it would have a 90% chance of orgasm, then a 90% chance that the orgasm is ruined, so 81% chance of a ruined orgasm and 9% chance of a full/not-ruined orgasm.schefflera wrote: Sat May 27, 2017 10:06 am Does TAI first calculates the orgasm chance and then ruin?
In that case, when I choose "Often allow orgasm" and "Often ruin" I will have a 90% chance to have an orgasm and only 90% from 10%, what's 9% in total, of getting ruined. And that's by far not very often
avatarbr wrote: Mon May 22, 2017 1:19 am It's possible to edit/create the "on the edge" responses, without affect when you respond to a @Edge command?
Like, when you get a @Edge command, everything it's like how is today when you type "on the edge" or similar.
avatarbr wrote: Mon May 22, 2017 1:19 am "on the edge" and "edging" (not tested more) only work on @Edge.
"I'm on the edge" "I'm there" (I got from the EdgeKEY.txt file), trigger the edge response, even on a @Edge.
fenway wrote: Mon May 22, 2017 2:56 am Hey whenever the TEASE AI does a slideshow with Hentai and other pictures, it freaks out and displays the pictures for only a few milliseconds until it stalls on a picture for a couple seconds and then goes ballistic again... How do I fix this?
sweden123 wrote: Wed May 24, 2017 3:25 pm Is it possible to generate a random number between two variables, assuming they are both random numbers?
schefflera wrote: Sat May 27, 2017 10:06 am just read the poll thread of the orgasm chances and wondered, how TAI calculates the chances.
It's not the chances of an orgasm what makes me wonder, but more how it calculates the differences between orgasm and ruin.
RagingRaven wrote: Sat May 27, 2017 11:11 am I believe it is calculated sequentially, but not in the way you described. First, it decides "will you have an orgasm?" If yes, then it asks "will this orgasm be ruined?" So for your example, it would have a 90% chance of orgasm, then a 90% chance that the orgasm is ruined, so 81% chance of a ruined orgasm and 9% chance of a full/not-ruined orgasm.
Thanks for making things clear.RagingRaven wrote: Sat May 27, 2017 11:11 amI believe it is calculated sequentially, but not in the way you described. First, it decides "will you have an orgasm?" If yes, then it asks "will this orgasm be ruined?" So for your example, it would have a 90% chance of orgasm, then a 90% chance that the orgasm is ruined, so 81% chance of a ruined orgasm and 9% chance of a full/not-ruined orgasm.schefflera wrote: Sat May 27, 2017 10:06 am Does TAI first calculates the orgasm chance and then ruin?
In that case, when I choose "Often allow orgasm" and "Often ruin" I will have a 90% chance to have an orgasm and only 90% from 10%, what's 9% in total, of getting ruined. And that's by far not very often
