Milovana.com

What are the chances we could have a command like @ResponseYes for a #Vocabulary file?

Something like:

@Response(#Vocabulary, ResponseFile.txt)

Would help a lot to make the Domme answer something for user inputs.

Hello there =)

I'm having issues getting videos to play in TeaseAI - when a video starts playing I can here the audio but the media window doesn't change. (when I click Img <--> Vid the media window goes to blue with no right click menu) I've had a good hunt through the forums here to see if this is a common issue but I haven't turned up anything other than images being displayed can cause it to not play the video.

If I click 'show video controls' nothing changes - I've tried startin up TeaseAI and using the media panel to manually open a video before starting the session but the same result - no video, just audio.

I'm running the latest win mediaplayer 12 on win7x64 with .NET all installed. I do have vlc installed as well as the K-lite codec pack. I've tested all the different video types in mediaplayer itself and they play fine in there, tbh I'm at a bit of a loss?

Are there any debug commands or logs that may offer a clue as to whats stopping it or am I just not understanding the app?

Thanks for any advice you can offer =D

-------------------------------------

UPDATE: OK, so I've managed to find the video window by pure chance - it is the exact width of the side panel and only displays when TeaseAI is running maximised and the side panel is hidden?? (screengrab below)
If I turn the side panel on it seems to be getting knocked off the side of the screen. Any ideas?

Spoiler: show

video.png (319.65 KiB) Viewed 2665 times

LaunchLover wrote: Sat May 13, 2017 9:31 pm

Spoiler: show

video.png

That is a weird bug for sure :)
I only installed k-lite and it started working for me. Try making a new Tease-AI folder and see if it is broken there also. Helps you zoom in to where the fault lies.

LaunchLover wrote: Sat May 13, 2017 9:31 pm UPDATE: OK, so I've managed to find the video window by pure chance - it is the exact width of the side panel and only displays when TeaseAI is running maximised and the side panel is hidden?? (screengrab below)
If I turn the side panel on it seems to be getting knocked off the side of the screen. Any ideas?

That's definitely a strange one, I haven't heard of this issue before (but if anyone else is having it, please let me know). It definitely shouldn't be doing that, the video should appear at the maximum available size that preserves its aspect ratio. It should also account for the sidepanel being open, like this:



Can you try installing Tease AI to a new directory (so you'll start with completely new settings) like Gormur suggested and tell me if it still does this? If it does, then we can take the next steps to try to figure this out

I am having the same problem with the videos

and also TAI cannot play the videos from avatar in the .webm folder / format

Harry2stroke wrote: Sun May 14, 2017 4:18 am I am having the same problem with the videos

and also TAI cannot play the videos from avatar in the .webm folder / format

I just tested here and worked with mp4 and webm files.

I am using the default window/panels.

Does this work in 64 bit? When I try to install, and run the exe, an icon shows up in my taskbar, but it disappears after about 5 seconds and nothing ever happens after that. When I checked the log, it says

Spoiler: show

5/9/2017 11:19:50 PM Application V0.54.7.0 started
5/9/2017 11:30:12 PM Application V0.54.7.0 started
5/13/2017 9:08:39 PM Application V0.54.7.0 started
5/13/2017 9:10:24 PM Application V0.54.7.0 started
5/13/2017 9:13:47 PM Application V0.54.9.0 started
5/13/2017 9:20:47 PM Application V0.54.9.0 started
5/13/2017 9:26:56 PM Application V0.54.9.0 started
5/13/2017 9:27:20 PM Application V0.54.9.0 started

I don't know what else to do, I have extracted the patch, I have windows .net and media player, and have read the guide. I tried running in Windows 7 compatibility mode, I tried running as admin, running in a smaller window size, everything I can think of. Any suggestions?

whydif19 wrote: Sun May 14, 2017 4:44 am Does this work in 64 bit? When I try to install, and run the exe, an icon shows up in my taskbar, but it disappears after about 5 seconds and nothing ever happens after that. When I checked the log, it says

yes it works..i have win10 64bit and works fine for me (also on win7 64bit on my laptop it works)....sorry i really don't know what is the problem

whydif19 wrote: Sun May 14, 2017 4:44 am Does this work in 64 bit? When I try to install, and run the exe, an icon shows up in my taskbar, but it disappears after about 5 seconds and nothing ever happens after that. When I checked the log, it says

Spoiler: show

5/9/2017 11:19:50 PM Application V0.54.7.0 started
5/9/2017 11:30:12 PM Application V0.54.7.0 started
5/13/2017 9:08:39 PM Application V0.54.7.0 started
5/13/2017 9:10:24 PM Application V0.54.7.0 started
5/13/2017 9:13:47 PM Application V0.54.9.0 started
5/13/2017 9:20:47 PM Application V0.54.9.0 started
5/13/2017 9:26:56 PM Application V0.54.9.0 started
5/13/2017 9:27:20 PM Application V0.54.9.0 started

I don't know what else to do, I have extracted the patch, I have windows .net and media player, and have read the guide. I tried running in Windows 7 compatibility mode, I tried running as admin, running in a smaller window size, everything I can think of. Any suggestions?

Try downloading https://www.microsoft.com/en-us/downloa ... x?id=49981 and install/repair.

1885 wrote: Sun May 14, 2017 1:23 am Can you try installing Tease AI to a new directory (so you'll start with completely new settings) like Gormur suggested and tell me if it still does this? If it does, then we can take the next steps to try to figure this out

I'll give it a go now with a fresh install on a different drive (kudos to genome231 that I'm actually concerned about keeping the domina waiting )

1885 wrote: Sun May 14, 2017 1:23 am Can you try installing Tease AI to a new directory (so you'll start with completely new settings) like Gormur suggested and tell me if it still does this? If it does, then we can take the next steps to try to figure this out

Nope, fresh install same result -

Spoiler: show

Open it up on first run:

installed.png (199.19 KiB) Viewed 2481 times

and there it is hiding again:

installed2.png (142.88 KiB) Viewed 2481 times

ErrorLog folder is empty and the only mention of mediaplayer in the log is:

Spoiler: show

14/05/2017 20:10:03 Loading Sub settings...
14/05/2017 20:10:03 Loading Range settings...
14/05/2017 20:10:03 Configuring media player...
14/05/2017 20:10:03 Initializing Games window...
14/05/2017 20:10:03 Checking previous orgasms...

LaunchLover wrote: Sun May 14, 2017 7:17 pm

1885 wrote: Sun May 14, 2017 1:23 am Can you try installing Tease AI to a new directory (so you'll start with completely new settings) like Gormur suggested and tell me if it still does this? If it does, then we can take the next steps to try to figure this out

Nope, fresh install same result -

Spoiler: show

Open it up on first run:
installed.png

and there it is hiding again:
installed2.png

ErrorLog folder is empty and the only mention of mediaplayer in the log is:

Spoiler: show

14/05/2017 20:10:03 Loading Sub settings...
14/05/2017 20:10:03 Loading Range settings...
14/05/2017 20:10:03 Configuring media player...
14/05/2017 20:10:03 Initializing Games window...
14/05/2017 20:10:03 Checking previous orgasms...

If you are sure you can play the videos in media player outside Tease AI I would blame .net for this probably. Windows 7 is kind of annoying with it. Be sure to have them all v2.0 v3.0 v3.5 and v4 x86 and x64. I know this sounds like nuts but having all of the .net packages is just a good thing :) This should all be available under windows update the manual part.

LaunchLover wrote: Sun May 14, 2017 7:17 pm Nope, fresh install same result -

Gormur wrote: Mon May 15, 2017 12:39 am If you are sure you can play the videos in media player outside Tease AI I would blame .net for this probably. Windows 7 is kind of annoying with it. Be sure to have them all v2.0 v3.0 v3.5 and v4 x86 and x64. I know this sounds like nuts but having all of the .net packages is just a good thing :) This should all be available under windows update the manual part.

I would second what Gormur suggested here. I just checked and Tease AI uses .NET 4.0 references, so I would start by installing .NET 4.0 if it isn't already. If that fixes it, please let us know. If it doesn't or you have all the .NET packages already, let me know and I'll keep trying to look into it further.

I am looking in my registry, it appears I have 1.0, 1.1, 2.0, 3.0, 3.5, 4.0, and 4.52 in 32 bit, and 2.0, 3.0, 3.5, 4.0, and 4.52 in 64 bit. I am running Windows 8 64 bit. I installed 4.6.1 just now, and teaseAI.exe will show up in my services under the task manager for about 10 seconds before it closes.

whydif19 wrote: Mon May 15, 2017 6:38 am I am looking in my registry, it appears I have 1.0, 1.1, 2.0, 3.0, 3.5, 4.0, and 4.52 in 32 bit, and 2.0, 3.0, 3.5, 4.0, and 4.52 in 64 bit. I am running Windows 8 64 bit. I installed 4.6.1 just now, and teaseAI.exe will show up in my services under the task manager for about 10 seconds before it closes.

Is it possible that one of your Anti-Virus\Anti-Malware programs picked it up as a suspicious or unknown program and put Tease AI in a quarantine list?