Milovana.com

Oh, that's great. I had just sort of accepted that this wasn't possible with the current version (guess I overlooked the overrRide.leftHtml() function). But I can see now that it is with a bit of work figuring out the details of the css. I've only looked briefly at your code, but it' seems nicely structured and well documented enough to be easy to use as a starting point. Thank you for sharing your insight, PG, much appreciated.

spirit wrote: Tue May 15, 2018 8:15 pm Oh, that's great. I had just sort of accepted that this wasn't possible with the current version (guess I overlooked the overrRide.leftHtml() function). But I can see now that it is with a bit of work figuring out the details of the css. I've only looked briefly at your code, but it' seems nicely structured and well documented enough to be easy to use as a starting point. Thank you for sharing your insight, PG, much appreciated.

You can also set it using guide.setLeftHtml or guide.setLeftBody

If you want to set it on page load, then use override.
If you want to set it anywhere else in javascript then use guide (e.g. to change the left pane using a delay or button press)

Hi Philo,

I ran across a little bug today. Using Guideme 3.6 (I'm pretty sure it's the latest build).
**Edit** I noticed your post of version 3.7 after and downloaded and tried it but same result.

If I use a delay like and pages like It does not work as expected. The intent is if flag EasyMode is set page 21 will always select 21-2, otherwise it will always select 21-1. What I get is random. The relevant log entries are shown below. You can clearly see it says both 21-1 and 21-2 are allowed, when only 21-2 should be. If I use this instead it works as expected, so at least I have a workaround though. I've attached a zip file containing a simple demo of the issue.

Other than that 3.6 seems pretty solid.

Thanks,

PG

PlayfulGuy wrote: Sat May 19, 2018 11:27 pm Hi Philo,

I ran across a little bug today. Using Guideme 3.6 (I'm pretty sure it's the latest build).
**Edit** I noticed your post of version 3.7 after and downloaded and tried it but same result.

If I use a delay like

Code: Select all

      <Delay seconds="0" target="21-(1..2)" />

and pages like

Code: Select all

        <Page id="21-1" if-not-set="EasyMode">
              page stuff
        </Page>

        <Page id="21-2" if-set="EasyMode">
              page stuff
       </Page

It does not work as expected. The intent is if flag EasyMode is set page 21 will always select 21-2, otherwise it will always select 21-1. What I get is random. The relevant log entries are shown below. You can clearly see it says both 21-1 and 21-2 are allowed, when only 21-2 should be.

Other than that 3.6 seems pretty solid.

Thanks,

PG

I haven't (to my knowledge) changed any code around that recently, so I suspect that is a bug that has been around for a while.
I will have a look when I get a chance

In Guideme 3.6 and earlier you could press Alt-D to bring up the debug window to jump to specific pages or alter variables and flags. In 3.7 Alt-D now just opens the applications Debug menu.

How do I get to that debug window? I use this all the time for testing and can't find the proper key sequence.

PG

PlayfulGuy wrote: Sun May 20, 2018 3:39 pm In Guideme 3.6 and earlier you could press Alt-D to bring up the debug window to jump to specific pages or alter variables and flags. In 3.7 Alt-D now just opens the applications Debug menu.

How do I get to that debug window? I use this all the time for testing and can't find the proper key sequence.

PG

Sorry my fault, I was getting the alt key for menus working.
Accidentally set the debug menu to alt d

Edit the DisplayBundle.properties file
it is the
MainDebug = &Debug

remove the & or move it before a letter other than D

That will change the key used to select the debug menu.

philo wrote: Sun May 20, 2018 12:12 pm

PlayfulGuy wrote: Sat May 19, 2018 11:27 pm Hi Philo,

I ran across a little bug today. Using Guideme 3.6 (I'm pretty sure it's the latest build).
**Edit** I noticed your post of version 3.7 after and downloaded and tried it but same result.

If I use a delay like

Code: Select all

      <Delay seconds="0" target="21-(1..2)" />

and pages like

Code: Select all

        <Page id="21-1" if-not-set="EasyMode">
              page stuff
        </Page>

        <Page id="21-2" if-set="EasyMode">
              page stuff
       </Page

It does not work as expected. The intent is if flag EasyMode is set page 21 will always select 21-2, otherwise it will always select 21-1. What I get is random. The relevant log entries are shown below. You can clearly see it says both 21-1 and 21-2 are allowed, when only 21-2 should be.

Other than that 3.6 seems pretty solid.

Thanks,

PG

I haven't (to my knowledge) changed any code around that recently, so I suspect that is a bug that has been around for a while.
I will have a look when I get a chance

Found the bug, must have been there a while.
It is fixed now, so will be in the next release.

Hi Philo,

I think I have followed your instructions, but the "Importer" don`t work correct.

I still have a problem. The Importer now downloads the script and the images,

but NOT the audio files!

Is that normal?

Thx for your help.

JerryLee06 wrote: Sat Jun 02, 2018 7:38 am Hi Philo,

I think I have followed your instructions, but the "Importer" don`t work correct.

I still have a problem. The Importer now downloads the script and the images,

but NOT the audio files!

Is that normal?

Thx for your help.

Can you let me know a tease that isn't downloading the audio and I will have a look.

Hi Philo,

Magicians-of-Pleasure

the mp3 files will not be downloaded

I know that this files are just the metronome files, but with the other flash teases it is the same.

JerryLee06 wrote: Sat Jun 02, 2018 9:44 am Hi Philo,

Magicians-of-Pleasure

the mp3 files will not be downloaded

I know that this files are just the metronome files, but with the other flash teases it is the same.

New version of the download jar file that should download sound files
https://mega.nz/#!gFIRGA4Q!PDdl7WaRYpFf ... MuIvxhIe78

philo wrote: Sat Jun 02, 2018 11:09 am

JerryLee06 wrote: Sat Jun 02, 2018 9:44 am Hi Philo,

Magicians-of-Pleasure

the mp3 files will not be downloaded

I know that this files are just the metronome files, but with the other flash teases it is the same.

New version of the download jar file that should download sound files
https://mega.nz/#!gFIRGA4Q!PDdl7WaRYpFf ... MuIvxhIe78

That worked great...thanks!!

strange... i can't edit the start post of the thread anymore... i get everytime a "you have been blocked" message

d3vi0n wrote: Sat Jun 09, 2018 9:07 pm strange... i can't edit the start post of the thread anymore... i get everytime a "you have been blocked" message

There has been some sort of security implemented that tries to block code injection attacks but it tends to overblock.
Anything that looks like it might be sql tends to get blocked so words like update, delete, insert, drop can trigger it.

philo wrote: Sun Jun 10, 2018 6:57 am

d3vi0n wrote: Sat Jun 09, 2018 9:07 pm strange... i can't edit the start post of the thread anymore... i get everytime a "you have been blocked" message

There has been some sort of security implemented that tries to block code injection attacks but it tends to overblock.
Anything that looks like it might be sql tends to get blocked so words like update, delete, insert, drop can trigger it.

In my case, I needed to remove all the " and ' (I replaced with *).