Milovana.com

boundupone wrote: Tue Feb 27, 2024 11:56 pm

throwawayacct wrote: Tue Feb 27, 2024 10:53 pm

boundupone wrote: Sun Feb 25, 2024 6:42 pm And here it is

https://mega.nz/folder/VrxDmKib#EKgoi8fFFSKRPg7_JEJ6og

Be careful with it, as I tested on ET312b and the change from original stim file to finisher file seems smooth enough, but mileage will vary by your box and setup, so be careful

As always import before downloading

had you intended on releasing a mono track? Just checking, as this file is showing up as a mono and not the stereo from vi22

strange, when i look at it in audacity i see both channels?? also, this is for vi33 not 22, it is based on someone elses stim file and i changed then ending of the video and stim file (i would need to search to find the post with the original file)

I think this was the original file i used as basis for mine - viewtopic.php?p=344225#p344225

boundupone wrote: Wed Feb 28, 2024 8:29 am

boundupone wrote: Tue Feb 27, 2024 11:56 pm

throwawayacct wrote: Tue Feb 27, 2024 10:53 pm

had you intended on releasing a mono track? Just checking, as this file is showing up as a mono and not the stereo from vi22

strange, when i look at it in audacity i see both channels?? also, this is for vi33 not 22, it is based on someone elses stim file and i changed then ending of the video and stim file (i would need to search to find the post with the original file)

I think this was the original file i used as basis for mine - viewtopic.php?p=344225#p344225

Yeah that was my file, LOL. Cobbled together from VI22 triphase. I had misread the post a bit and assumed it was for vi22 but yes, 33 is the shorter "Goon project" one. However when i put yours into Audacity, it showed up as mono only. I copy/pasted and made it into stereo, worked great.

Well, played vi33 for the first time... it is much brighter and more on the fun side than what I expected from numberonefan, it is almost a PMV. That last song is a true gem :)

I might spend some time crafting estim that is better matching the video, and if I do, I will make sure to share it back :)

So, this is great news for all estimmers. The next version of restim will have moods

I created proof of concept for vi33a. This one was something I only discovered last weekend and I think it was not fair that it doesn't have estim that turns it into proper experience. It has so nice contrast between dark and bright material, and I love when such video has estim that feels like it is following the mood.

This is 3rd iteration of the estim, and I playtested first 2, both were great and fun to play, but not all was complete and the current version is like 2 hours of work from the last one I playtested. Of course this one might not be 100% but at some point I will be happy with it and stop changing it.

In previous revision the ramp was not steep enough for me so this one has a bit more oomph towards the end, calibration is during the short loading 0-100% bar at start, set that as high as you can take if you aren't already desenitized, it goes a bit down after calibration for first round.

My goal is to make experience similar to what dpl created for vi22 and Electric Dreams, those are some of best tracks in my opinion, and setting bar so high for my first estim just shows how easy is to create such file now. I was considering building a generator for estim files a while ago, but this now means there is no point, what I wanted to be possible to achieve with it is possible to achieve with restim, and from funscripts there is also path forward to be able to translate these sensations to work on upcoming pulse boxes.

Also except dpl whose work I am trying to replicate in quality, I also want to thank AquariumParrot and TiaBlaze for inspirations, for how subtle estim signals are used to improve immersion, and how RoD pulls you in to endure the ride and then gives you proper reward at the end. And of course diglet for making possible creation of experience like this in OFS.

This is the folder where I will keep latest version (currently v3 is there).
https://mega.nz/folder/22wTXT6Z#DVVMEzvXMaBDabIL1uNTRQ

In case you playtest it before final version, finger on the volume! Unless you feel very brave ;)
And I hope you have as much fun as I am having with this. If you encounter any problems or sections that feel wrong (some parts are spiky, and that is exactly how I wanted it, it is based on mood I perceived from the content and it is a trip you have to endure), please note the timestamps and feedback. You can also send it to pm or to discord if you are in any servers we share.

Once restim version which supports all the new funscripts (I am using here pulse frequency and pulse width control to achieve sensations previously impossible with funscripts) is released, I will add to that folder whole OFS project with all funscripts so anyone interested how to produce some of sensations from this estim can easily see the section and replicate it in your work.

EDIT: The mp3 is exported from restim, so there is no calibration, both channels are same strength. I use 2 triphases (4 channel box), one common on head, l/r to shaft/balls and other common to aneros tempo l/r to cb ring and thigh pads.
I also use pads on cock and balls, and I use 4 small pads of same size, one on balls, one on shaft, and 2 for/close to head, on dorsal and ventral side. I like to have the surface of the common larger especially for spiky experiences like this one is supposed to be.

edger477 wrote: Mon Mar 04, 2024 11:36 am,,I created proof of concept for vi33a.
,,This is the folder where I will keep latest version (currently v3 is there)..
,,

Since you didn't mention a specific electrode configuration and it looks like the Restim calibration is neutral and also non-specific between where left and right electrode placements are? Am I assuming this is a standard tri-phase config with the common as the electrode in the middle? I'm about to do a playthrough with that configuration.

EDIT: that electrode config worked very well(left head, common perineum or base of shaft with top insulated, right prostate facing anal electrode)

Wow, you really worked that pulse frequency variation in a way that is aggressively immersive in the best possible way. There was no point where I felt like I was getting used to anything 'being the same' for too long, it's continuously different as the stim rolls on which is fantastic and a far departure from standard Funstim funscript conversions or the common 'circles/map to edge' without anything else changing. The pulse/vibration variation feeling is similar to the Mistress and control box type of thing but with its own twist and using Restim, which makes this even more accessible for others to learn from and create similar sensations.

It seems so great right off the bat that I'm not sure I know how to suggest any improvements, even the progressive ramp that you said you improved on seems to be spot on, at least to me, which seems to be a very difficult thing to get right.

Spoiler: show

I suppose I did notice the boost for the kink elements and do like pain with estim, so I'd probably play into that a little more, but at the same time perhaps it would push me over the edge instead of making it to the end, but I'm not sure.

Electro wrote: Tue Mar 05, 2024 2:26 am It seems so great right off the bat that I'm not sure I know how to suggest any improvements, even the progressive ramp that you said you improved on seems to be spot on, at least to me, which seems to be a very difficult thing to get right.

Many thanks! I edited my post to confirm that there is no calibration (restim exports mp3 without calibration). I based the new ramp on the amount of few % that I increased the volume during my playthrough. Not all intensity control is done via volume only though, I also used pulse width to temporarily increase intensity, I find that to have almost "squeeze" effect, and it has different feel depending on whether the carrier is also changed, and whether pulse frequency is changed.

Your comments about frequency variation are great feedback, it is exactly what I was trying to create, and it is proof of concept because you will be able to edit it much easier. I need to check with diglet if it might be possible to add another volume funscript, but the current one is also quite easy to adjust in funscript. However, using head as common this one is already on the limit of breaking immersion and I think any more would wake me from trance.

I remember after my last playthrough that my own comment for a section was "oh, this is a bit boring, this song requires spikes" and I added them.

What I'd like to ask:
- the mindwash sections are intentionally lower on volume (I really liked MCB and I already forgot it not even full week in, but something reminded me about it), did you feel the triggers get implantend? I wanted to make a bit specific experience for different triggers and I hope it was apparent
- if yes, have you felt any buzz during poppers prompts that was similar to the trigger implantation
- did you notice the experience getting progressively better and better? I tried to improve immersion as it progresses, and try to have more and better synchronized strokes to the screen (last few minutes are completely immersive, and I tried to make the fucking in left-half screen after cum section very special... for this to work I think you need to connect head as common, I spent great deal of time mapping the movements to the funscript and that requires to have head as common)

What I'd like to ask:
- the mindwash sections are intentionally lower on volume (I really liked MCB and I already forgot it not even full week in, but something reminded me about it), did you feel the triggers get implantend? I wanted to make a bit specific experience for different triggers and I hope it was apparent
- if yes, have you felt any buzz during poppers prompts that was similar to the trigger implantation

I don't drop into hypno trance, it's just something that doesn't work for me, despite seeking it out and wanting it to work. I enjoy the use of suggestive text and video tied in with the sensations because it brings immersion and also shows/says/suggests what it *should* feel like. I think this combination of stim, the text, and porn elements in the video accomplishes the task well. I'm hoping others comment on their experience too, especially if they accomplish hypno drop/trance.

- did you notice the experience getting progressively better and better? I tried to improve immersion as it progresses, and try to have more and better synchronized strokes to the screen (last few minutes are completely immersive, and I tried to make the fucking in left-half screen after cum section very special... for this to work I think you need to connect head as common, I spent great deal of time mapping the movements to the funscript and that requires to have head as common)

I thought it got better as it went along, I replayed with head as common for the better sync, oddly enough a -100 audio delay in Scriptplayer when I had left on head compared to the run with head as common had my first run feeling mostly in sync, which I had to adjust back to have it work again with the correct sync, which also put the other elements in their proper time spots better too.

I'd like to hear what other people are experiencing with this one too. Hopefully they are able to get the video because numberonefan's MEGA got nuked.

I have played the newest version (v4 is now in folder).

I have also put funscripts on github (forked the restim to put examples in, not sure if it makes sense to make pr for that)

EDIT: removed link due to github not being user-friendly to download files for normal users... Use mega
https://mega.nz/folder/22wTXT6Z#DVVMEzvXMaBDabIL1uNTRQ

I am currently happy with this version, I am not saying I won't change anything but where it is now is very fun and good ride.

And yes,

Electro wrote: Wed Mar 06, 2024 12:54 am I don't drop into hypno trance, it's just something that doesn't work for me, despite seeking it out and wanting it to work.

I can't either, due to adhd. But edibles solve that :)

edger477 wrote: Wed Mar 06, 2024 11:48 am I have played the newest version (v4 is now in folder).

Thank you very much Edger477, I just downloaded your e-stim file
All I have to do now is find the opportunity to test it. I didn’t read the comments so as not to so spoil it. I definitely will report afterwards.
I can't wait to feel what you managed to do with these additional funscripts.
Because « plain funscript conversion » are great, but are pretty predictable. And when it comes to e-stim I love to be surprised, even in a spicy way

frenchdude wrote: Wed Mar 06, 2024 6:34 pm Because « plain funscript conversion » are great, but are pretty predictable. And when it comes to e-stim I love to be surprised, even in a spicy way

I am glad you are playing it

Hey. I also played it last night - was really interesting the variety. Shows the amazing potential of restim.
I am very excited at the pioneering work being done by you and others.
I was playing the mp3 it after a bit of overuse of estim with other files, so I didn't have great pleasure (but not down to your file I think- I am still learning how to calibrate) , so I plan to try it again when I am fresher and will report back again. I look forward to trying the funscripts with restim.

For all of you trying this, note that I developed and tested this with quite large-surface electrodes (common on head was 2 4x4cm pads, L and R are 4x4cm pads, and other electrodes for 2nd triphase/prostate are even larger), so don't push volume too high especially if your electrodes are smaller or you are using something like conductive rubber tubing. It was not meant to be entirely pleasant all the time, but signal that will just be spiky/unpleasant on larger electrodes can become real painful on small ones.

edger477 wrote: Wed Mar 06, 2024 11:48 am I have also put funscripts on github (forked the restim to put examples in, not sure if it makes sense to make pr for that)

https://github.com/edger477/restim/tree ... Industries

I am currently happy with this version, I am not saying I won't change anything but where it is now is very fun and good ride.

I realized the scripts were not on latest version (only mp3 was).... Latest funscripts have been pushed too.

EDIT: The mp3 is exported from restim, so there is no calibration, both channels are same strength. I use 2 triphases (4 channel box), one common on head, l/r to shaft/balls and other common to aneros tempo l/r to cb ring and thigh pads.
I also use pads on cock and balls, and I use 4 small pads of same size, one on balls, one on shaft, and 2 for/close to head, on dorsal and ventral side. I like to have the surface of the common larger especially for spiky experiences like this one is supposed to be.

I originally read this quickly and thought it made sense, but now that I pulled out my other DIY box to add additional electrodes, I'm suddenly not understanding the configuration. I don't know how to say where I'm confused so I'm just going to retype my thought process as a string of consciousness so maybe you can fill in the blanks in my reading comprehension.

Common on head - got that.
Left - shaft, ok so this is normally base of shaft on the bottom(urethra side) for me just forward of the balls
Right - balls, where? Is this one of the situations where people say balls and they mean perineum? do you mean on the bottom of the balls? backside of the balls? I'd probably put this on the perineum as close to the balls without stimming the balls, I've custom modified the Citor 'ball squeezer' electrode to put pressure on the perineum for this.

For the other 2 channels
Common on an anal electrode near or facing the prostate.
Left - cb ring, what kind? is this a loop electrode with the top insulated to stimulate the perineum, if so I have a conflicting stim location with the right channel of the first box. So which one do I have wrong?
Right - thigh pads, I haven't done this and made it feel good yet because I wasn't sure where to aim the pads at because I notice just an inch of difference can make a big difference to the feel but I don't want to relocate a pad a dozen times without at least having a starting point for placement. If I'm measuring a distance starting at the point where the balls meet the body and measure down my leg, how much distance figuring the center of the electrode being that point?(metric or inches, whatever you are comfortable with I know both) and then where should the center be in relation to the top of the leg being 0 degrees and the side of the leg being 90 degrees, or are you aiming for a certain portion of muscle edge/thickness point?

..and for the other part of what you said, am I assuming that's an entirely different set of electrode placements?
one on balls - Is this perineum, back of balls, bottom of balls, front side of balls, a conductive around the loose 'top' of the balls(ball stretcher type placement?)
one on shaft - Usually figuring base of shaft on the bottom(urethra side) just forward of the balls
I understand the head electrodes. ..but which channels for all of these, it sounds like dual channel because I'm short on electrodes for a common? So I assume the head is one channel and the balls and shaft is another?

Thanks in advance for clarifying, it feels like there's a tribal knowledge where we all assume we understand things the same way and this is an example where I can really see how easily it is to twist around what can seem clear to one and be muddy to others.

Edger477 plays his threephase files on a quad-channel box, so he has more (5?) electrodes with a shared common on head.
I don't think the electrode configuration is important as long as you align the top position in Restim with your electrode config "top".

Latest release version of Restim now supports all these funscripts.

I already shared some feedback on discord, but here is more. This time I played with VR which made it a lot more immersive. The matching between the stroking and action onscreen was top-notch. The signals definitely got more and more immersive as the video progressed. I didn't feel the triggers had any effect on me, however.

Also noticed some negative parts. When playing classic funscripts, I can dial in the volume quite accurately so that it doesn't hurt and I'm very close to the edge without cumming. With these additional funscripts the volume is less consistent, I found myself unable to set the volume high enough to cum and low enough not to feel pain. I had to use another file to finish. Some of the signal changes at the end are perhaps a bit too aggressive. It doesn't help that this release is relatively short, I need a good amount of time to dial in the volume and then the video is already almost over. Maybe the last part is just me.

I also noticed a bug, which is entirely my fault. If a script sets the pulse frequency really low (0.001) the audio cuts out as Restim attempts to generate a very long silence between pulses. The workaround is to not set the pulse frequency very close to zero, but I will try to fix it in code.