So, I built an edging machine for tease and denial...

This is the place for all suggestions, releases and feedback regarding Milovana Hardware efforts.
denial1234
Curious Newbie
Curious Newbie
Posts: 4
Joined: Fri Jul 11, 2014 3:53 pm

So, I built an edging machine for tease and denial...

Post by denial1234 »

Hey!

I like Tease and Denial and everyone who does is dreaming of a machine that drives him mad with lust by always stopping right before you reach an orgasm. I built such a machine. It's not absolutely perfect, but it's easy to assemble and more or less affordable. I give this document and all the ideas delivered within to the world for free. I read some other posts where people started to built their own and were all talkative about the project, but as soon as they made real progress there were sentences like "I wanna make a product out of it and get rich". Fuck this. Get horny, I say :)

So with this in mind, I wish you as much fun with this machine as I have! Do with my idea and its implementation what you want. It's even okay with me that you make a product out of it and get rich. But if you really do: Please try to get in touch with me and send me a free example ;)
My email: [email protected]

For those of you who have problems building this thing: It's a rare event that I check this email for new mails, since it's mostly an email for my porn accounts. So pleeeease use google and your own brain to solve problems. If there are any errors in this document...deal with it. I made this as properly as I could.
Of course I will check in here from time to time and see if there are real problems, but don't count on that.

For the females amoungst you: Sorry, but this will only work for men...I'd built some for you too, but my girlfriend is not into TnD as much as I am, so she won't volunteer as test person...But maybe this implementation gives you some ideas on how to adapt this version for a vagina :)

Since this thing involves electricity and americans may built such a machine: I am not responsible if you hurt yourself. It's nearly impossible, since we are dealing with ~5 Volts, but you never know. Think before you try something that might be a stupid idea and don't blame me if it goes wrong :)

Okay, that's everything from my side...let's start building stuff!!
How to build your own eding machine.pdf
(774.58 KiB) Downloaded 25482 times
Last edited by denial1234 on Fri Jul 11, 2014 8:02 pm, edited 1 time in total.
denial1234
Curious Newbie
Curious Newbie
Posts: 4
Joined: Fri Jul 11, 2014 3:53 pm

Re: So, I built an edging machine for tease and denial...

Post by denial1234 »

One more thing, if you know any other websites, where people are interested in stuff like this: Please post the PDF there and spread the word :) I tried fetlife, but I can't find an option for file upload in the discussion groups...
User avatar
jackstock
Explorer At Heart
Explorer At Heart
Posts: 711
Joined: Sat Apr 28, 2012 1:05 pm
Gender: Male
Sexual Orientation: Straight
I am a: None of the above
Location: Canada

Re: So, I built an edging machine for tease and denial...

Post by jackstock »

this is fascinating! you are the Tesla of tease and denial. Free for everyone! lets make sure everyone has one of these in their homes :-D
shawnstuh133
Explorer
Explorer
Posts: 24
Joined: Mon Jun 02, 2014 5:09 am

Re: So, I built an edging machine for tease and denial...

Post by shawnstuh133 »

Brilliant in writing. However, i'd imagine we'd all like to see a demonstration of some sort. Also, if you could find a stronger vibration motor and possibly a way to make it have as little human influence as possible. See, one could easily press the button to late causing a magnificent orgasm or too early to cause one to be able to easily cheat the system. See the less human judgment you have the better. There has to be an easy and in-expensive way to be able to detect when one is at edge. I think once you perfected that, then you have the perfect edging machine. However, it is a good one if you are completely honest for pressing the button. However, keep in mind that there are many who wouldn't be as honest.
denial1234
Curious Newbie
Curious Newbie
Posts: 4
Joined: Fri Jul 11, 2014 3:53 pm

Re: So, I built an edging machine for tease and denial...

Post by denial1234 »

@jackstock: "The Tesla of TnD" I like that, thank you sir :)

@shawnsthul133: Thanks for your feedback! I agree with you in every point, but this is all I can give you right now. I just uploaded a new version of the file with this paragraph added, regarding the "honesty"-problem:
Of course, it's possible that you are so horny that your hands are shaking and you can't hit the button and must endure an incredible ruined orgasm (in other words: you're not honest enough to press the button early enough). This will lead to serious self-doubts the next morning when you see yourself in the mirror. I don't want that for you! In this case, you could just look up in the Serial Monitor (see chapter 6.1.) what your maximum pressure value was during your edging session. Make this value a little bit smaller and set it as your initial threshold in the Arduino Sketch:

int maxValue = <yourPersonalValue>;

After that you always start with this value and you won't need to use the button anymore. I can't guarantee you that this value will always be the right one, but in my experience it is more or less the same each time.
A fully automatic detection is definitely hard to create, because it is highly individual how and when someone reaches an orgasm. If you search for edging machines like this, you'll find many approaches, but no final product (even though some of these approaches are a few years old). I just wanted to change that and I think mine is working fine so far :)

And in my last chapter I also talk about the not-so-strong vibrator...I just couldn't find a better one so far. Maybe it's out there...idk.
User avatar
Nezhul
Experimentor
Experimentor
Posts: 2373
Joined: Fri Apr 30, 2010 6:22 am
Sexual Orientation: Straight

Re: So, I built an edging machine for tease and denial...

Post by Nezhul »

personally for me vibrators don't really work. I tried a few with no sucess. My cock actually goes numb from vibration before I reach the edge.

What I would do is some kind of rotary motor with loose sleave around the cock head.
Check out my new site, and read SexTV story there!
Also I have the DARK section that features feature Erotic Horror.
I also launched a SubscribeStar recently! Please come check it out!
Updated whenever I feel like it. :wave: :love:
Image
Bill120012
Explorer
Explorer
Posts: 67
Joined: Thu Jul 29, 2010 12:55 pm
Gender: Male
Sexual Orientation: Bisexual/Bi-Curious
I am a: Submissive

Re: So, I built an edging machine for tease and denial...

Post by Bill120012 »

Nice idea thank you, one I will defo try...However I have been thinking about a speaker coil type device which vibrates back and forth, The stroke would be short i suppose but maybe that would not matter, it woul dhave to be separate from the pressure pad..hmm thinking cap on :-)
User avatar
Nezhul
Experimentor
Experimentor
Posts: 2373
Joined: Fri Apr 30, 2010 6:22 am
Sexual Orientation: Straight

Re: So, I built an edging machine for tease and denial...

Post by Nezhul »

What I meant BTW is something like Zini DIB Bang-Bang thing.
Check out my new site, and read SexTV story there!
Also I have the DARK section that features feature Erotic Horror.
I also launched a SubscribeStar recently! Please come check it out!
Updated whenever I feel like it. :wave: :love:
Image
damiendenio
Explorer
Explorer
Posts: 11
Joined: Sat Dec 20, 2014 10:46 pm

Re: So, I built an edging machine for tease and denial...

Post by damiendenio »

fascinating.

thank you very much.

also the pdf, language, your explanations, your style, I like it a lot.

the most I liked is the sensor part, how the "machine" understands and how the code works. great stuff.

however, mainly, it`s personally for me a bit hard to get that hard with a small coin sized vibrator. also using hard stuff like a toilet roll is not that attractive. don`t get me wrong please, I just try to contribute ma opinion and reflect my view. It`s in general, to me, "genious" but in details, many things should be "improved" ("changed" for my taste)

is there a way to control the vibration`s "rhythm"? I mean for example when vibrating, vibrating with the music`s beats? Would it be a good idea? long short long long short vibrates or fast slow, like beats..

the main seductive part is "movement" for me. something, like a fake pussy should wrap my manhood and move back and forth with the music`s beats and with a code and sensor maybe "by me" the system should know about my edging point.. that would be great.. but hard or impossible to implement for especially DIY projects..

no?
User avatar
teased247
Explorer At Heart
Explorer At Heart
Posts: 157
Joined: Mon Jul 09, 2007 9:02 pm
Gender: Male
Sexual Orientation: Straight
I am a: Switch
Location: So Cal
Contact:

Re: So, I built an edging machine for tease and denial...

Post by teased247 »

the main seductive part is "movement" for me. something, like a fake pussy should wrap my manhood and move back and forth with the music`s beats
I have been wondering and thinking about this as well for a long time, and might have some ideas for this.

It seems that with most "sleeves" (at least the types that are encased such as a fleshlight type of device) when all of the air is sucked out of them or maybe it's pushed out .. whatever ... there is a pretty decent grip on the cock as the vacuum effect keeps the cock sucked up and into the device. That being said .... in the past I have used something called an "oro-stimulator" here is a link to one http://www.amazon.com/DM-New-Oro-Stimul ... stimulator .. I think I paid $15 for mine .... a few years ago. Anyways ..... the way this thing worked was pretty cool .... you basically push it on forcing all of the air out .... and then when you squeezr the ball/bulb .. it caused the stimulator to slide back up the cock ... or basically trying to push it out with the air pressure .... once the bulb was released it would suck the cock back into the stimulator. It was pretty easy to get the thing to slide up and down the cock with whatever speed and length just by squeezing that ball/bulb. Albeit ... it was a pretty short up and down as it really did not go all the way down to the base of my cock ... and I am not huge by any means. More of a head stimulator I think.

Anyways .... my thoughts are with a fleshlight type of device .. you could add a tube and a bulb .. or perhaps something like an old fashioned Bellow .. http://www.ebay.com/itm/NEW-Large-Firep ... 35e0c4ea40 the kind that they used to use in the old days to stoke a fire ... to push the air back into the device. Easy enough to make . heck .. prolly could even use a balloon.

Now I am no programmer or electrician and have no idea on how to put this together .. but it would "Seem" easy enough to program something that could push down on that bellow to the beat of a manual setting .... or even some music ... which could get a really great up and down action happening. (my visual would be like a jigsaw type of arm/motor or a piston that could be altered or adjusted to press down on a spring loaded bellow/balloon to get that suction and push out action) ..... Add some vibrations .. and this could be super fun for the CH videos and heck .. even the Flash Teases could incorporate this with the metronome sounds??

Again .. not sure how to actually do this .. but I sure can visualize it. Maybe somebody here can run with this idea??

Thoughts?? Suggestions??
Bill120012
Explorer
Explorer
Posts: 67
Joined: Thu Jul 29, 2010 12:55 pm
Gender: Male
Sexual Orientation: Bisexual/Bi-Curious
I am a: Submissive

Re: So, I built an edging machine for tease and denial...

Post by Bill120012 »

So I built one too..and it works :-)..I used a bigger vibrator and used a mosfet to control that from the pin 8 output. I used a plastic pipe of the right diameter for me..Its fun to play around with the time delay multiplier but the rest is as written. Not sure when i will cum next :-0.

Thanks so much
Bill xxx
User avatar
teased247
Explorer At Heart
Explorer At Heart
Posts: 157
Joined: Mon Jul 09, 2007 9:02 pm
Gender: Male
Sexual Orientation: Straight
I am a: Switch
Location: So Cal
Contact:

Re: So, I built an edging machine for tease and denial...

Post by teased247 »

Nice work! A pic or video would be great to see how it works :whistle:
Bill120012
Explorer
Explorer
Posts: 67
Joined: Thu Jul 29, 2010 12:55 pm
Gender: Male
Sexual Orientation: Bisexual/Bi-Curious
I am a: Submissive

Re: So, I built an edging machine for tease and denial...

Post by Bill120012 »

Well this is fun :-)

I hope the original designer still views this because I have a suggestion and I am not a code man.

or some other reader is good with code ?

I cummed yesterday because after a few weeks of denial and then using the edging machine I found that eventually my pressure level required to edge fell and I could not get the thing off quick enough once i realized I was going over the edge. ( great ruined orgasm though :-)

Would it be possible to add code so that the push button could be used to reduce the pressure limit to take into account sensitivity, so if you feel like you are going to cum you can press the button again to stop the vibrator ?

Or maybe a second button ?

If not I will add a switch to the vibrator can be turned off regardless of the state of the machine.

Thanks
Bill
snowcat22
Explorer
Explorer
Posts: 17
Joined: Sun Dec 16, 2007 8:22 pm

Re: So, I built an edging machine for tease and denial...

Post by snowcat22 »

I built one as well! I had my doubts, but it really works quite well. Kept me going for about an hour last night. I do agree about the size of the vibrator, but having used it, the little guy is really effective (for me), it takes a while to get warmed up and it kind of sneaks up on you.

That being said, I'm going to experiment with the arduino controlling a relay, rather than the vibrator directly. That way I can wire any commercial vibrator, from a small battery powered bullet to an AC powered Hitachi, and control it in the same manner. Can't wait to see how it works!

Nice job with the coding, really well done!

...snowcat22...
User avatar
camel
Explorer At Heart
Explorer At Heart
Posts: 331
Joined: Fri Sep 29, 2006 4:40 pm
Gender: Male
Sexual Orientation: Straight
I am a: Switch

Re: So, I built an edging machine for tease and denial...

Post by camel »

Two other products you might want to look at.

I saw this review of Steve-O-Toys and thought someone might love to adapt the edging machine for this. I'd imagine that using the bullets, possibly adding the pressure sensor directly to the 'ring', and somehow replacing the controller with the adruino board would be perfect.

Also, I don't know if you've heard of Tethercell? It’s sized like a AA battery, but it’s actually a bluetooth-enabled shell that holds a AAA battery!!!! Replace one AA battery in one of your favorite toys with one of these and suddenly it’s remote-controlled via iPhone or Android! Oh, the possibilities! Combine with a blue-tooth enabled Arduino and you have the ability to use the setup with any stimulator that takes AA batteries.
Post Reply

Who is online

Users browsing this forum: No registered users and 15 guests